** Display scan stats.
*/
static void display_scanstats(
  sqlite3 *db,                    /* Database to query */
  ShellState *pArg                /* Pointer to ShellState */
){
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
  int i;
  int i, k, n, mx;
  fprintf(pArg->out, "-------- scanstats --------\n");
  mx = 0;
  for(k=0; k<=mx; k++){
    double rEstLoop = 1.0;
  for(i=0; 1; i++){
    sqlite3_stmt *p = pArg->pStmt;
    sqlite3_int64 nEst, nLoop, nVisit;
    const char *zExplain;
    if( sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_NLOOP, (void*)&nLoop) ){
      break;
    }
    sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_NVISIT, (void*)&nVisit);
    sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_EST, (void*)&nEst);
    sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_EXPLAIN, (void*)&zExplain);

    fprintf(pArg->out, "Loop %d: \"%s\"\n", i, zExplain);
    fprintf(pArg->out, "        nLoop=%-8lld nVisit=%-8lld nEst=%-8lld\n",
        nLoop, nVisit, nEst
    );
  }
    for(i=n=0; 1; i++){
      sqlite3_stmt *p = pArg->pStmt;
      sqlite3_int64 nLoop, nVisit;
      double rEst;
      int iSid;
      const char *zExplain;
      if( sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_NLOOP, (void*)&nLoop) ){
        break;
      }
      sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_SELECTID, (void*)&iSid);
      if( iSid>mx ) mx = iSid;
      if( iSid!=k ) continue;
      if( n==0 ){
        rEstLoop = (double)nLoop;
        if( k>0 ) fprintf(pArg->out, "-------- subquery %d -------\n", k);
      }
      n++;
      sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_NVISIT, (void*)&nVisit);
      sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_EST, (void*)&rEst);
      sqlite3_stmt_scanstatus(p, i, SQLITE_SCANSTAT_EXPLAIN, (void*)&zExplain);
      fprintf(pArg->out, "Loop %2d: %s\n", n, zExplain);
      rEstLoop *= rEst;
      fprintf(pArg->out, "         nLoop=%-8lld nRow=%-8lld estRow=%-8lld estRow/Loop=%-8g\n",
          nLoop, nVisit, (sqlite3_int64)rEstLoop, rEst
      );
    }
#else
  fprintf(pArg->out, "-------- scanstats --------\n");
  }
  fprintf(pArg->out, "---------------------------\n");
  fprintf(pArg->out,
      "sqlite3_stmt_scanstatus() unavailable - "
      "rebuild with SQLITE_ENABLE_STMT_SCANSTATUS\n"
  );
#endif
  fprintf(pArg->out, "---------------------------\n");
}

/*
** Parameter azArray points to a zero-terminated array of strings. zStr
** points to a single nul-terminated string. Return non-zero if zStr
** is equal, according to strcmp(), to any of the strings in the array.
** Otherwise, return zero.

  ".output ?FILENAME?     Send output to FILENAME or stdout\n"
  ".print STRING...       Print literal STRING\n"
  ".prompt MAIN CONTINUE  Replace the standard prompts\n"
  ".quit                  Exit this program\n"
  ".read FILENAME         Execute SQL in FILENAME\n"
  ".restore ?DB? FILE     Restore content of DB (default \"main\") from FILE\n"
  ".save FILE             Write in-memory database into FILE\n"
  ".scanstats on|off      Turn sqlite3_stmt_scanstatus() metrics on or off\n"
  ".schema ?TABLE?        Show the CREATE statements\n"
  "                         If TABLE specified, only show tables matching\n"
  "                         LIKE pattern TABLE.\n"
  ".separator STRING ?NL? Change separator used by output mode and .import\n"
  "                         NL is the end-of-line mark for CSV\n"
  ".shell CMD ARGS...     Run CMD ARGS... in a system shell\n"
  ".show                  Show the current values for various settings\n"

    sqlite3_close(pSrc);
  }else


  if( c=='s' && strncmp(azArg[0], "scanstats", n)==0 ){
    if( nArg==2 ){
      p->scanstatsOn = booleanValue(azArg[1]);
#ifndef SQLITE_ENABLE_STMT_SCANSTATUS
      fprintf(stderr, "Warning: .scanstats not available in this build.\n");
#endif
    }else{
      fprintf(stderr, "Usage: .scanstats on|off\n");
      rc = 1;
    }
  }else

  if( c=='s' && strncmp(azArg[0], "schema", n)==0 ){

** <dl>
** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt>
** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set to the
** total number of times that the X-th loop has run.</dd>
**
** [[SQLITE_SCANSTAT_NVISIT]] <dt>SQLITE_SCANSTAT_NVISIT</dt>
** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set to the
** total number of rows visited by the X-th loop.</dd>
** total number of rows examined by all iterations of the X-th loop.</dd>
**
** [[SQLITE_SCANSTAT_EST]] <dt>SQLITE_SCANSTAT_EST</dt>
** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set to the
** query planner's estimate for the number of rows visited for each
** iteration of the X-th loop.  If the query planner's estimate was accurate,
** then this value should be approximately NVISIT/NLOOP.
** <dd>^The "double" variable pointed to by the T parameter will be set to the
** query planner's estimate for the average number of rows output from each
** iteration of the X-th loop.  If the query planner's estimates was accurate,
** then this value will approximate the quotient NVISIT/NLOOP and the
** product of this value for all prior loops with the same SELECTID will
** be the NLOOP value for the current loop.
**
** [[SQLITE_SCANSTAT_NAME]] <dt>SQLITE_SCANSTAT_NAME</dt>
** <dd>^The "const char *" variable pointed to by the T parameter will be set to 
** a zero-terminated UTF-8 string containing the name of the index or table used
** for the X-th loop.
**
** [[SQLITE_SCANSTAT_EXPLAIN]] <dt>SQLITE_SCANSTAT_EXPLAIN</dt>
** <dd>^The "const char *" variable pointed to by the T parameter will be set to 
** a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN] description
** for the X-th loop.
**
** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt>
** <dd>^The "int" variable pointed to by the T parameter will be set to the
** "select-id" for the X-th loop.  The select-id identifies which query or
** subquery the loop is part of.  The main query has a select-id of zero.
** The select-id is the same value as is output in the first column
** of an [EXPLAIN QUERY PLAN] query.
** </dl>
*/
#define SQLITE_SCANSTAT_NLOOP    0
#define SQLITE_SCANSTAT_NVISIT   1
#define SQLITE_SCANSTAT_EST      2
#define SQLITE_SCANSTAT_NAME     3
#define SQLITE_SCANSTAT_EXPLAIN  4
#define SQLITE_SCANSTAT_SELECTID 5

/*
** CAPI3REF: Prepared Statement Scan Status
**
** Return status data for a single loop within query pStmt.
**
** The "iScanStatusOp" parameter determines which status information to return.

  sqlite3_stmt *pStmt;            /* First argument */
  int idx;                        /* Second argument */

  const char *zName;
  const char *zExplain;
  sqlite3_int64 nLoop;
  sqlite3_int64 nVisit;
  sqlite3_int64 nEst;
  double rEst;
  int res;

  if( objc!=3 ){
    Tcl_WrongNumArgs(interp, 1, objv, "STMT IDX");
    return TCL_ERROR;
  }
  if( getStmtPointer(interp, Tcl_GetString(objv[1]), &pStmt) ) return TCL_ERROR;
  if( Tcl_GetIntFromObj(interp, objv[2], &idx) ) return TCL_ERROR;

  res = sqlite3_stmt_scanstatus(pStmt, idx, SQLITE_SCANSTAT_NLOOP, (void*)&nLoop);
  if( res==0 ){
    Tcl_Obj *pRet = Tcl_NewObj();
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj("nLoop", -1));
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewWideIntObj(nLoop));
    sqlite3_stmt_scanstatus(pStmt, idx, SQLITE_SCANSTAT_NVISIT, (void*)&nVisit);
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj("nVisit", -1));
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewWideIntObj(nVisit));
    sqlite3_stmt_scanstatus(pStmt, idx, SQLITE_SCANSTAT_EST, (void*)&nEst);
    sqlite3_stmt_scanstatus(pStmt, idx, SQLITE_SCANSTAT_EST, (void*)&rEst);
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj("nEst", -1));
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewWideIntObj(nEst));
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewDoubleObj(rEst));
    sqlite3_stmt_scanstatus(pStmt, idx, SQLITE_SCANSTAT_NAME, (void*)&zName);
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj("zName", -1));
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj(zName, -1));
    sqlite3_stmt_scanstatus(pStmt, idx, SQLITE_SCANSTAT_EXPLAIN, (void*)&zExplain);
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj("zExplain", -1));
    Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj(zExplain, -1));
    Tcl_SetObjResult(interp, pRet);

# define VdbeCoverageIf(v,x)
# define VdbeCoverageAlwaysTaken(v)
# define VdbeCoverageNeverTaken(v)
# define VDBE_OFFSET_LINENO(x) 0
#endif

#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
void sqlite3VdbeScanStatus(Vdbe*, int, int, int, i64, const char*);
void sqlite3VdbeScanStatus(Vdbe*, int, int, int, LogEst, const char*);
#else
# define sqlite3VdbeScanStatus(a,b,c,d,e)
#endif

#endif

typedef unsigned bft;  /* Bit Field Type */

typedef struct ScanStatus ScanStatus;
struct ScanStatus {
  int addrExplain;                /* OP_Explain for loop */
  int addrLoop;                   /* Address of "loops" counter */
  int addrVisit;                  /* Address of "rows visited" counter */
  int iSelectID;                  /* The "Select-ID" for this loop */
  i64 nEst;                       /* Estimated rows per loop */
  LogEst nEst;                    /* Estimated output rows per loop */
  char *zName;                    /* Name of table or index */
};

/*
** An instance of the virtual machine.  This structure contains the complete
** state of the virtual machine.
**

      break;
    }
    case SQLITE_SCANSTAT_NVISIT: {
      *(sqlite3_int64*)pOut = p->anExec[pScan->addrVisit];
      break;
    }
    case SQLITE_SCANSTAT_EST: {
      double r = 1.0;
      *(sqlite3_int64*)pOut = pScan->nEst;
      LogEst x = pScan->nEst;
      while( x<100 ){
        x += 10;
        r *= 0.5;
      }
      *(double*)pOut = r*sqlite3LogEstToInt(x);
      break;
    }
    case SQLITE_SCANSTAT_NAME: {
      *(const char**)pOut = pScan->zName;
      break;
    }
    case SQLITE_SCANSTAT_EXPLAIN: {
      if( pScan->addrExplain ){
        *(const char**)pOut = p->aOp[ pScan->addrExplain ].p4.z;
      }else{
        *(const char**)pOut = 0;
      }
      break;
    }
    case SQLITE_SCANSTAT_SELECTID: {
      if( pScan->addrExplain ){
        *(int*)pOut = p->aOp[ pScan->addrExplain ].p1;
      }else{
        *(int*)pOut = -1;
      }
      break;
    }
    default: {
      return 1;
    }
  }
  return 0;
}

** Add an entry to the array of counters managed by sqlite3_stmt_scanstatus().
*/
void sqlite3VdbeScanStatus(
  Vdbe *p,                        /* VM to add scanstatus() to */
  int addrExplain,                /* Address of OP_Explain (or 0) */
  int addrLoop,                   /* Address of loop counter */ 
  int addrVisit,                  /* Address of rows visited counter */
  i64 nEst,                       /* Estimated number of rows */
  LogEst nEst,                    /* Estimated number of output rows */
  const char *zName               /* Name of table or index being scanned */
){
  int nByte = (p->nScan+1) * sizeof(ScanStatus);
  ScanStatus *aNew;
  aNew = (ScanStatus*)sqlite3DbRealloc(p->db, p->aScan, nByte);
  if( aNew ){
    ScanStatus *pNew = &aNew[p->nScan++];

static void addScanStatus(
  Vdbe *v,                        /* Vdbe to add scanstatus entry to */
  SrcList *pSrclist,              /* FROM clause pLvl reads data from */
  WhereLevel *pLvl,               /* Level to add scanstatus() entry for */
  int addrExplain                 /* Address of OP_Explain (or 0) */
){
  const char *zObj = 0;
  i64 nEst = 1;
  WhereLoop *pLoop = pLvl->pWLoop;
  if( (pLoop->wsFlags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0 ){
    zObj = pLoop->u.btree.pIndex->zName;
  }else{
    zObj = pSrclist->a[pLvl->iFrom].zName;
  }
  if( pLoop->nOut>=10 ){
    nEst = sqlite3LogEstToInt(pLoop->nOut);
  }
  sqlite3VdbeScanStatus(
      v, addrExplain, pLvl->addrBody, pLvl->addrVisit, nEst, zObj
      v, addrExplain, pLvl->addrBody, pLvl->addrVisit, pLoop->nOut, zObj
  );
}
#else
# define addScanStatus(a, b, c, d) ((void)d)
#endif

  }

  uplevel [list do_test $tn [list set {} $ret] [list {*}$res]]
}

do_execsql_test 1.1 { SELECT count(*) FROM t1, t2; } 6
do_scanstatus_test 1.2 {
  nLoop 1 nVisit 2 nEst 1048576 zName t1 zExplain {SCAN TABLE t1}
  nLoop 2 nVisit 6 nEst 1048576 zName t2 zExplain {SCAN TABLE t2}
  nLoop 1 nVisit 2 nEst 1048576.0 zName t1 zExplain {SCAN TABLE t1}
  nLoop 2 nVisit 6 nEst 1048576.0 zName t2 zExplain {SCAN TABLE t2}
}

do_execsql_test 1.3 {
  ANALYZE;
  SELECT count(*) FROM t1, t2;
} 6
do_scanstatus_test 1.4 {
  nLoop 1 nVisit 2 nEst 2 zName t1 zExplain {SCAN TABLE t1}
  nLoop 2 nVisit 6 nEst 3 zName t2 zExplain {SCAN TABLE t2}
  nLoop 1 nVisit 2 nEst 2.0 zName t1 zExplain {SCAN TABLE t1}
  nLoop 2 nVisit 6 nEst 3.0 zName t2 zExplain {SCAN TABLE t2}
}

do_execsql_test 1.5 { ANALYZE }
do_execsql_test 1.6 {
  SELECT count(*) FROM t1, t2 WHERE t2.rowid>1;
} 4
do_scanstatus_test 1.7 {
  nLoop 1 nVisit 2 nEst 2 zName t2 zExplain 
  nLoop 1 nVisit 2 nEst 2.0 zName t2 zExplain 
  {SEARCH TABLE t2 USING INTEGER PRIMARY KEY (rowid>?)}
  nLoop 2 nVisit 4 nEst 2 zName t1 zExplain {SCAN TABLE t1}
  nLoop 2 nVisit 4 nEst 2.0 zName t1 zExplain {SCAN TABLE t1}
}

do_execsql_test 1.8 {
  SELECT count(*) FROM t1, t2 WHERE t2.rowid>1;
} 4

do_scanstatus_test 1.9 {
  nLoop 2 nVisit 4 nEst 2 zName t2 zExplain 
  nLoop 2 nVisit 4 nEst 2.0 zName t2 zExplain 
  {SEARCH TABLE t2 USING INTEGER PRIMARY KEY (rowid>?)}
  nLoop 4 nVisit 8 nEst 2 zName t1 zExplain {SCAN TABLE t1}
  nLoop 4 nVisit 8 nEst 2.0 zName t1 zExplain {SCAN TABLE t1}
}

do_test 1.9 {
  sqlite3_stmt_scanstatus_reset [db_last_stmt_ptr db]
} {}

do_scanstatus_test 1.10 {
  nLoop 0 nVisit 0 nEst 2 zName t2 zExplain 
  nLoop 0 nVisit 0 nEst 2.0 zName t2 zExplain 
  {SEARCH TABLE t2 USING INTEGER PRIMARY KEY (rowid>?)}
  nLoop 0 nVisit 0 nEst 2 zName t1 zExplain {SCAN TABLE t1}
  nLoop 0 nVisit 0 nEst 2.0 zName t1 zExplain {SCAN TABLE t1}
}

#-------------------------------------------------------------------------
# Try a few different types of scans.
#
reset_db
do_execsql_test 2.1 {
  CREATE TABLE x1(i INTEGER PRIMARY KEY, j);
  INSERT INTO x1 VALUES(1, 'one');
  INSERT INTO x1 VALUES(2, 'two');
  INSERT INTO x1 VALUES(3, 'three');
  INSERT INTO x1 VALUES(4, 'four');
  CREATE INDEX x1j ON x1(j);

  SELECT * FROM x1 WHERE i=2;
} {2 two}

do_scanstatus_test 2.2 {
  nLoop 1 nVisit 1 nEst 1 zName x1 
  nLoop 1 nVisit 1 nEst 1.0 zName x1 
  zExplain {SEARCH TABLE x1 USING INTEGER PRIMARY KEY (rowid=?)}
}

do_execsql_test 2.3.1 {
  SELECT * FROM x1 WHERE j='two'
} {2 two}
do_scanstatus_test 2.3.2 {
  nLoop 1 nVisit 1 nEst 10 zName x1j 
  nLoop 1 nVisit 1 nEst 10.0 zName x1j 
  zExplain {SEARCH TABLE x1 USING COVERING INDEX x1j (j=?)}
}

do_execsql_test 2.4.1 {
  SELECT * FROM x1 WHERE j<'two'
} {4 four 1 one 3 three}
do_scanstatus_test 2.4.2 {
  nLoop 1 nVisit 3 nEst 262144 zName x1j 
  nLoop 1 nVisit 3 nEst 262144.0 zName x1j 
  zExplain {SEARCH TABLE x1 USING COVERING INDEX x1j (j<?)}
}

do_execsql_test 2.5.1 {
  SELECT * FROM x1 WHERE j>='two'
} {2 two}
do_scanstatus_test 2.5.2 {
  nLoop 1 nVisit 1 nEst 262144 zName x1j 
  nLoop 1 nVisit 1 nEst 262144.0 zName x1j 
  zExplain {SEARCH TABLE x1 USING COVERING INDEX x1j (j>?)}
}

do_execsql_test 2.6.1 {
  SELECT * FROM x1 WHERE j BETWEEN 'three' AND 'two'
} {3 three 2 two}
do_scanstatus_test 2.6.2 {
  nLoop 1 nVisit 2 nEst 16384 zName x1j 
  nLoop 1 nVisit 2 nEst 16384.0 zName x1j 
  zExplain {SEARCH TABLE x1 USING COVERING INDEX x1j (j>? AND j<?)}
}

do_execsql_test 2.7.1 {
  CREATE TABLE x2(i INTEGER, j, k);
  INSERT INTO x2 SELECT i, j, i || ' ' || j FROM x1;
  CREATE INDEX x2j ON x2(j);
  CREATE INDEX x2ij ON x2(i, j);
  SELECT * FROM x2 WHERE j BETWEEN 'three' AND 'two'
} {3 three {3 three} 2 two {2 two}}

do_scanstatus_test 2.7.2 {
  nLoop 1 nVisit 2 nEst 16384 zName x2j 
  nLoop 1 nVisit 2 nEst 16384.0 zName x2j 
  zExplain {SEARCH TABLE x2 USING INDEX x2j (j>? AND j<?)}
}

do_execsql_test 2.8.1 {
  SELECT * FROM x2 WHERE i=1 AND j='two'
}
do_scanstatus_test 2.8.2 {
  nLoop 1 nVisit 0 nEst 8 zName x2ij 
  nLoop 1 nVisit 0 nEst 8.0 zName x2ij 
  zExplain {SEARCH TABLE x2 USING INDEX x2ij (i=? AND j=?)}
}

do_execsql_test 2.9.1 {
  SELECT * FROM x2 WHERE i=5 AND j='two'
}
do_scanstatus_test 2.9.2 {
  nLoop 1 nVisit 0 nEst 8 zName x2ij 
  nLoop 1 nVisit 0 nEst 8.0 zName x2ij 
  zExplain {SEARCH TABLE x2 USING INDEX x2ij (i=? AND j=?)}
}

do_execsql_test 2.10.1 {
  SELECT * FROM x2 WHERE i=3 AND j='three'
} {3 three {3 three}}
do_scanstatus_test 2.10.2 {
  nLoop 1 nVisit 1 nEst 8 zName x2ij 
  nLoop 1 nVisit 1 nEst 8.0 zName x2ij 
  zExplain {SEARCH TABLE x2 USING INDEX x2ij (i=? AND j=?)}
}

#-------------------------------------------------------------------------
# Try with queries that use the OR optimization.
#
do_execsql_test 3.1 {
  CREATE TABLE a1(a, b, c, d);
  CREATE INDEX a1a ON a1(a);
  CREATE INDEX a1bc ON a1(b, c);

  WITH d(x) AS (SELECT 1 UNION ALL SELECT x+1 AS n FROM d WHERE n<=100)
  INSERT INTO a1 SELECT x, x, x, x FROM d;
}

do_execsql_test 3.2.1 {
  SELECT d FROM a1 WHERE (a=4 OR b=13)
} {4 13}
do_scanstatus_test 3.2.2 {
  nLoop 1 nVisit 1 nEst 10 zName a1a 
  nLoop 1 nVisit 1 nEst 10.0 zName a1a 
  zExplain {SEARCH TABLE a1 USING INDEX a1a (a=?)}
  nLoop 1 nVisit 1 nEst 10 zName a1bc 
  nLoop 1 nVisit 1 nEst 10.0 zName a1bc 
  zExplain {SEARCH TABLE a1 USING INDEX a1bc (b=?)}
}

do_execsql_test 3.2.1 {
  SELECT count(*) FROM a1 WHERE (a BETWEEN 4 AND 12) OR (b BETWEEN 40 AND 60)
} {30}
do_scanstatus_test 3.2.2 {
  nLoop 1 nVisit 9 nEst 16384 zName a1a 
  nLoop 1 nVisit 9 nEst 16384.0 zName a1a 
  zExplain {SEARCH TABLE a1 USING INDEX a1a (a>? AND a<?)}
  nLoop 1 nVisit 21 nEst 16384 zName a1bc
  nLoop 1 nVisit 21 nEst 16384.0 zName a1bc
  zExplain {SEARCH TABLE a1 USING INDEX a1bc (b>? AND b<?)}
}

do_execsql_test 3.3.1 {
  SELECT count(*) FROM a1 AS x, a1 AS y 
  WHERE (x.a BETWEEN 4 AND 12) AND (y.b BETWEEN 1 AND 10)
} {90}
do_scanstatus_test 3.2.2 {
  nLoop 1 nVisit 10 nEst 16384 zName a1bc 
  nLoop 1 nVisit 10 nEst 16384.0 zName a1bc 
  zExplain {SEARCH TABLE a1 AS y USING COVERING INDEX a1bc (b>? AND b<?)}
  nLoop 10 nVisit 90 nEst 16384 zName a1a
  nLoop 10 nVisit 90 nEst 16384.0 zName a1a
  zExplain {SEARCH TABLE a1 AS x USING COVERING INDEX a1a (a>? AND a<?)}
}

do_execsql_test 3.4.1 {
  SELECT count(*) FROM a1 WHERE a IN (1, 5, 10, 15);
} {4}
do_scanstatus_test 3.4.2 {
  nLoop 1 nVisit 4 nEst 40 zName a1a 
  nLoop 1 nVisit 4 nEst 40.0 zName a1a 
  zExplain {SEARCH TABLE a1 USING COVERING INDEX a1a (a=?)}
}

do_execsql_test 3.4.1 {
  SELECT count(*) FROM a1 WHERE rowid IN (1, 5, 10, 15);
} {4}
do_scanstatus_test 3.4.2 {
  nLoop 1 nVisit 4 nEst 4 zName a1
  nLoop 1 nVisit 4 nEst 4.0 zName a1
  zExplain {SEARCH TABLE a1 USING INTEGER PRIMARY KEY (rowid=?)}
}

#-------------------------------------------------------------------------
# Test that scanstatus() data is not available for searches performed
# by triggers.
#

  INSERT INTO p1 VALUES(1), (2), (3), (4);
  CREATE TABLE c1(y REFERENCES p1);
  INSERT INTO c1 VALUES(1), (2), (3);
  PRAGMA foreign_keys=on;
}
do_execsql_test    4.2.1 { DELETE FROM p1 WHERE x=4 }
do_scanstatus_test 4.2.2 { 
  nLoop 1 nVisit 1 nEst 1 zName sqlite_autoindex_p1_1 
  nLoop 1 nVisit 1 nEst 1.0 zName sqlite_autoindex_p1_1 
  zExplain {SEARCH TABLE p1 USING INDEX sqlite_autoindex_p1_1 (x=?)}

  nLoop 1 nVisit 3 nEst 524288 zName c1 zExplain {SCAN TABLE c1}
  nLoop 1 nVisit 3 nEst 524288.0 zName c1 zExplain {SCAN TABLE c1}
}

#-------------------------------------------------------------------------
# Further tests of different scan types.
#
reset_db
proc tochar {i} {

  ANALYZE;
}

do_execsql_test 5.1.1 {
  SELECT count(*) FROM t1 WHERE a IN (SELECT b FROM t1 AS ii)
} {2}
do_scanstatus_test 5.1.2 { 
  nLoop 1 nVisit 10 nEst 10 zName t1bc 
  nLoop 1 nVisit 10 nEst 10.0 zName t1bc 
  zExplain {SCAN TABLE t1 AS ii USING COVERING INDEX t1bc}
  nLoop 1 nVisit 2 nEst 8 zName sqlite_autoindex_t1_1
  nLoop 1 nVisit 2 nEst 8.0 zName sqlite_autoindex_t1_1
  zExplain {SEARCH TABLE t1 USING COVERING INDEX sqlite_autoindex_t1_1 (a=?)}
}

do_execsql_test 5.2.1 {
  SELECT count(*) FROM t1 WHERE a IN (0, 1)
} {2}
do_scanstatus_test 5.2.2 { 
  nLoop 1 nVisit 2 nEst 2 zName sqlite_autoindex_t1_1
  nLoop 1 nVisit 2 nEst 2.0 zName sqlite_autoindex_t1_1
  zExplain {SEARCH TABLE t1 USING COVERING INDEX sqlite_autoindex_t1_1 (a=?)}
}

do_eqp_test 5.3.1 {
  SELECT count(*) FROM t2 WHERE y = 'j';
} {0 0 0 {SEARCH TABLE t2 USING COVERING INDEX t2xy (ANY(x) AND y=?)}}
do_execsql_test 5.3.2 {
  SELECT count(*) FROM t2 WHERE y = 'j';
} {19}
do_scanstatus_test 5.3.3 { 
  nLoop 1 nVisit 19 nEst 56 zName t2xy zExplain
  nLoop 1 nVisit 19 nEst 56.0 zName t2xy zExplain
  {SEARCH TABLE t2 USING COVERING INDEX t2xy (ANY(x) AND y=?)}
}

do_eqp_test 5.4.1 {
  SELECT count(*) FROM t1, t2 WHERE y = c;
} {
  0 0 0 {SCAN TABLE t1 USING COVERING INDEX t1bc}
  0 1 1 {SEARCH TABLE t2 USING COVERING INDEX t2xy (ANY(x) AND y=?)}
}
do_execsql_test 5.4.2 {
  SELECT count(*) FROM t1, t2 WHERE y = c;
} {200}
do_scanstatus_test 5.4.3 { 
  nLoop 1 nVisit 10 nEst 10 zName t1bc 
  nLoop 1 nVisit 10 nEst 10.0 zName t1bc 
  zExplain {SCAN TABLE t1 USING COVERING INDEX t1bc}
  nLoop 10 nVisit 200 nEst 56 zName t2xy 
  nLoop 10 nVisit 200 nEst 56.0 zName t2xy 
  zExplain {SEARCH TABLE t2 USING COVERING INDEX t2xy (ANY(x) AND y=?)}
}

do_eqp_test 5.5.1 {
  SELECT count(*) FROM t1, t3 WHERE y = c;
} {
  0 0 1 {SCAN TABLE t3} 
  0 1 0 {SEARCH TABLE t1 USING AUTOMATIC COVERING INDEX (c=?)}
}
do_execsql_test 5.5.2 {
  SELECT count(*) FROM t1, t3 WHERE y = c;
} {200}
do_scanstatus_test 5.5.3 { 
  nLoop 1 nVisit 501 nEst 480 zName t3 zExplain {SCAN TABLE t3}
  nLoop 501 nVisit 200 nEst 20 zName auto-index zExplain
  nLoop 1 nVisit 501 nEst 480.0 zName t3 zExplain {SCAN TABLE t3}
  nLoop 501 nVisit 200 nEst 20.0 zName auto-index zExplain
  {SEARCH TABLE t1 USING AUTOMATIC COVERING INDEX (c=?)}
}

#-------------------------------------------------------------------------
# Virtual table scans
#
ifcapable fts3 {

    INSERT INTO ft1 VALUES('j e a b j e c b c i');
    INSERT INTO ft1 VALUES('a d e f b j j c g d');
  }
  do_execsql_test 6.1.1 {
    SELECT count(*) FROM ft1 WHERE ft1 MATCH 'd'
  } {6}
  do_scanstatus_test 6.1.2 { 
    nLoop 1 nVisit 6 nEst 24 zName ft1 zExplain 
    nLoop 1 nVisit 6 nEst 24.0 zName ft1 zExplain 
    {SCAN TABLE ft1 VIRTUAL TABLE INDEX 3:}
  }
}


finish_test