} 0

  # EVIDENCE-OF: R-33080-59193 Checkpoints initiated by this mechanism 
  # are PASSIVE.
  #
  set ::busy_callback_count 0
  proc busy_callback {args} {
  puts Hello
    incr ::busy_callback_count
    return 0
  }
  do_test 1.$tn.12.1 {
    sqlite3_wal_checkpoint_v2 db truncate
    autocheckpoint db 100 
    db busy busy_callback

  db close
  sqlite3 db test_control_lockproxy.db
  file_control_lockproxy_test db [get_pwd]
} {}
do_test filectrl-1.6 {
  sqlite3 db test.db
  set fn [file_control_tempfilename db]
  puts -nonewline \[$fn\]
  set fn
} {/etilqs_/}
db close
forcedelete .test_control_lockproxy.db-conch test.proxy
finish_test

    SELECT OFFSETS(t1) FROM t1
     WHERE t1 MATCH 'this OR that OR was OR a OR is OR test' ORDER BY docid;
  }
} [list {0 0 0 4 0 4 5 2 0 3 8 1 0 5 10 4} \
        {0 1 0 4 0 2 5 3 0 3 9 1 0 5 11 4} \
        {0 0 0 4 0 4 5 2 0 3 8 1 0 5 10 4}]

puts [db eval {SELECT c FROM t1 } ]
check_terms_all fts3d-4.1      {a four is test that this was}
check_doclist_all fts3d-4.1.1  a {[1 0[2]] [2 0[2]] [3 0[2]]}
check_doclist_all fts3d-4.1.2  four {}
check_doclist_all fts3d-4.1.3  is {[1 0[1]] [3 0[1]]}
#check_doclist_all fts3d-4.1.4  one {}
check_doclist_all fts3d-4.1.5  test {[1 0[3]] [2 0[3]] [3 0[3]]}
check_doclist_all fts3d-4.1.6  that {[2 0[0]]}

      MATCH '"land of canaan"' AND docid < 1030000 } 7
} {
  foreach s {0 1} {
    execsql "INSERT INTO t1(t1) VALUES('test-no-incr-doclist=$s')"
    do_execsql_test 2.$tn.$s $q $res
    set t($s) [lindex [time [list execsql $q] 100] 0]
  }

  puts "with optimization: $t(0)    without: $t(1)"

}

do_test 2.1 {
  execsql {
    CREATE VIRTUAL TABLE t2 USING fts4(order=DESC);
  }
  set num [list one two three four five six seven eight nine ten]

    } elseif {$iNext==($iPrev-1)} { 
      incr nBackward 
    } else {
      incr nNoncont
    }
    set iPrev $iNext
  }

  puts -nonewline \
      " (forward=$nForward, back=$nBackward, noncontiguous=$nNoncont)"


  expr {$nForward > 2*($nBackward + $nNoncont)}
} {1}
db close
tvfs delete

finish_test

    CREATE TABLE abc(a, b, c);
    INSERT INTO abc VALUES(1, 2, 3);
    INSERT INTO abc VALUES(4, 5, 6);
    INSERT INTO abc VALUES(7, 8, 9);
  }

  set ::res [list]
  explain {SELECT a, b, c FROM abc} 
  db eval {SELECT a, b, c FROM abc} {
    lappend ::res $a $b $c
    db progress 5 "expr 1"
    catch {db eval {SELECT a, b, c FROM abc} { }} msg
    db progress 5 "expr 0"
    lappend ::res $msg
  }

  INSERT INTO songs VALUES(6,'two',11);
}
set result [execsql {
  SELECT DISTINCT artist,sum(timesplayed) AS total      
  FROM songs      
  GROUP BY LOWER(artist)      
}]
puts result=$result
do_test select8-1.1 {
  execsql {
    SELECT DISTINCT artist,sum(timesplayed) AS total      
    FROM songs      
    GROUP BY LOWER(artist)      
    LIMIT 1 OFFSET 1
  }

# Test the btree mutex protocol for shared cache mode.
#
# $Id: shared4.test,v 1.2 2008/08/04 03:51:24 danielk1977 Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl
db close
puts hello

# This script is only valid if we are running shared-cache mode in a
# threadsafe-capable database engine.
#
ifcapable !shared_cache||!compound {
  finish_test
  return

  lappend r $msg
  return $r
}

# Do an VDBE code dump on the SQL given
#
proc explain {sql {db db}} {
  puts ""
  puts "addr  opcode        p1      p2      p3      p4               p5  #"
  puts "----  ------------  ------  ------  ------  ---------------  --  -"
  $db eval "explain $sql" {} {
    puts [format {%-4d  %-12.12s  %-6d  %-6d  %-6d  % -17s %s  %s} \
      $addr $opcode $p1 $p2 $p3 $p4 $p5 $comment
    ]
  }
}

proc explain_i {sql {db db}} {
  puts ""
  puts "addr  opcode        p1      p2      p3      p4                p5  #"
  puts "----  ------------  ------  ------  ------  ----------------  --  -"


  # Set up colors for the different opcodes. Scheme is as follows:
  #
  #   Red:   Opcodes that write to a b-tree.
  #   Blue:  Opcodes that reposition or seek a cursor. 
  #   Green: The ResultRow opcode.

    if {$opcode == "Halt" && $comment == "End of coroutine"} {
      set linebreak([expr $addr+1]) 1
    }
  }

  $db eval "explain $sql" {} {
    if {[info exists linebreak($addr)]} {
      puts ""
    }
    set I [string repeat " " $x($addr)]

    set col ""
    catch { set col $color($opcode) }

    puts [format {%-4d  %s%s%-12.12s%s  %-6d  %-6d  %-6d  % -17s %s  %s} \
      $addr $I $col $opcode $D $p1 $p2 $p3 $p4 $p5 $comment
    ]
  }
  puts "----  ------------  ------  ------  ------  ----------------  --  -"
}

# Show the VDBE program for an SQL statement but omit the Trace
# opcode at the beginning.  This procedure can be used to prove
# that different SQL statements generate exactly the same VDBE code.
#
proc explain_no_trace {sql} {

#----------------------------------------------------------------------
# Test cases vtab1.1.*
#

# We cannot create a virtual table if the module has not been registered.
#
do_test vtab1-1.1.1 {
  explain {
    CREATE VIRTUAL TABLE t1 USING echo;
  }
  catchsql {
    CREATE VIRTUAL TABLE t1 USING echo;
  }
} {1 {no such module: echo}}
do_test vtab1-1.1.2 {
  catchsql {
    CREATE VIRTUAL TABLE IF NOT EXISTS t1 USING echo;