"ENABLE_8_3_NAMES=" CTIMEOPT_VAL(SQLITE_ENABLE_8_3_NAMES),
#endif
#if SQLITE_ENABLE_API_ARMOR
  "ENABLE_API_ARMOR",
#endif
#if SQLITE_ENABLE_ATOMIC_WRITE
  "ENABLE_ATOMIC_WRITE",
#endif
#if SQLITE_ENABLE_BATCH_ATOMIC_WRITE
  "ENABLE_BATCH_ATOMIC_WRITE",
#endif
#if SQLITE_ENABLE_CEROD
  "ENABLE_CEROD",
#endif
#if SQLITE_ENABLE_COLUMN_METADATA
  "ENABLE_COLUMN_METADATA",
#endif

){
  MemJournal *p = (MemJournal *)pJfd;
  u8 *zOut = zBuf;
  int nRead = iAmt;
  int iChunkOffset;
  FileChunk *pChunk;

#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
 || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
  if( (iAmt+iOfst)>p->endpoint.iOffset ){
    return SQLITE_IOERR_SHORT_READ;
  }
#endif

  assert( (iAmt+iOfst)<=p->endpoint.iOffset );
  assert( p->readpoint.iOffset==0 || p->readpoint.pChunk!=0 );

  else{
    /* An in-memory journal file should only ever be appended to. Random
    ** access writes are not required. The only exception to this is when
    ** the in-memory journal is being used by a connection using the
    ** atomic-write optimization. In this case the first 28 bytes of the
    ** journal file may be written as part of committing the transaction. */ 
    assert( iOfst==p->endpoint.iOffset || iOfst==0 );
#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
 || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
    if( iOfst==0 && p->pFirst ){
      assert( p->nChunkSize>iAmt );
      memcpy((u8*)p->pFirst->zChunk, zBuf, iAmt);
    }else
#else
    assert( iOfst>0 || p->pFirst==0 );
#endif

/*
** Open an in-memory journal file.
*/
void sqlite3MemJournalOpen(sqlite3_file *pJfd){
  sqlite3JournalOpen(0, 0, pJfd, 0, -1);
}

#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
 || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
/*
** If the argument p points to a MemJournal structure that is not an 
** in-memory-only journal file (i.e. is one that was opened with a +ve
** nSpill parameter or as SQLITE_OPEN_MAIN_JOURNAL), and the underlying 
** file has not yet been created, create it now.
*/
int sqlite3JournalCreate(sqlite3_file *pJfd){
  int rc = SQLITE_OK;
  MemJournal *p = (MemJournal*)pJfd;
  if( p->pMethod==&MemJournalMethods && (
#ifdef SQLITE_ENABLE_ATOMIC_WRITE
     p->nSpill>0
#else
     /* While this appears to not be possible without ATOMIC_WRITE, the
     ** paths are complex, so it seems prudent to leave the test in as
     ** a NEVER(), in case our analysis is subtly flawed. */
     NEVER(p->nSpill>0)
#endif
#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
     || (p->flags & SQLITE_OPEN_MAIN_JOURNAL)
#endif
  )){
    rc = memjrnlCreateFile(p);
  }
  return rc;
}
#endif

/*
** The file-handle passed as the only argument is open on a journal file.

/*
** standard include files.
*/
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <time.h>
#include <sys/time.h>
#include <errno.h>
#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
# include <sys/mman.h>
#endif

#if SQLITE_MAX_MMAP_SIZE>0
  int nFetchOut;                      /* Number of outstanding xFetch refs */
  sqlite3_int64 mmapSize;             /* Usable size of mapping at pMapRegion */
  sqlite3_int64 mmapSizeActual;       /* Actual size of mapping at pMapRegion */
  sqlite3_int64 mmapSizeMax;          /* Configured FCNTL_MMAP_SIZE value */
  void *pMapRegion;                   /* Memory mapped region */
#endif

  int sectorSize;                     /* Device sector size */
  int deviceCharacteristics;          /* Precomputed device characteristics */

#if SQLITE_ENABLE_LOCKING_STYLE
  int openFlags;                      /* The flags specified at open() */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
  unsigned fsFlags;                   /* cached details from statfs() */
#endif
#if OS_VXWORKS

/*
** Explicitly call the 64-bit version of lseek() on Android. Otherwise, lseek()
** is the 32-bit version, even if _FILE_OFFSET_BITS=64 is defined.
*/
#ifdef __ANDROID__
# define lseek lseek64
#endif

#ifdef __linux__
/*
** Linux-specific IOCTL magic numbers used for controlling F2FS
*/
#define F2FS_IOCTL_MAGIC        0xf5
#define F2FS_IOC_START_ATOMIC_WRITE     _IO(F2FS_IOCTL_MAGIC, 1)
#define F2FS_IOC_COMMIT_ATOMIC_WRITE    _IO(F2FS_IOCTL_MAGIC, 2)
#define F2FS_IOC_START_VOLATILE_WRITE   _IO(F2FS_IOCTL_MAGIC, 3)
#define F2FS_IOC_ABORT_VOLATILE_WRITE   _IO(F2FS_IOCTL_MAGIC, 5)
#define F2FS_IOC_GET_FEATURES           _IOR(F2FS_IOCTL_MAGIC, 12, u32)
#define F2FS_FEATURE_ATOMIC_WRITE 0x0004
#endif /* __linux__ */


/*
** Different Unix systems declare open() in different ways.  Same use
** open(const char*,int,mode_t).  Others use open(const char*,int,...).
** The difference is important when using a pointer to the function.
**
** The safest way to deal with the problem is to always use this wrapper

#if defined(HAVE_LSTAT)
  { "lstat",         (sqlite3_syscall_ptr)lstat,          0 },
#else
  { "lstat",         (sqlite3_syscall_ptr)0,              0 },
#endif
#define osLstat      ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent)

  { "ioctl",         (sqlite3_syscall_ptr)ioctl,          0 },
#define osIoctl ((int(*)(int,int,...))aSyscall[28].pCurrent)

}; /* End of the overrideable system calls */


/*
** On some systems, calls to fchown() will trigger a message in a security
** log if they come from non-root processes.  So avoid calling fchown() if

/*
** Information and control of an open file handle.
*/
static int unixFileControl(sqlite3_file *id, int op, void *pArg){
  unixFile *pFile = (unixFile*)id;
  switch( op ){
#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
    case SQLITE_FCNTL_BEGIN_ATOMIC_WRITE: {
      int rc = osIoctl(pFile->h, F2FS_IOC_START_ATOMIC_WRITE);
      return rc ? SQLITE_IOERR_BEGIN_ATOMIC : SQLITE_OK;
    }
    case SQLITE_FCNTL_COMMIT_ATOMIC_WRITE: {
      int rc = osIoctl(pFile->h, F2FS_IOC_COMMIT_ATOMIC_WRITE);
      return rc ? SQLITE_IOERR_COMMIT_ATOMIC : SQLITE_OK;
    }
    case SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE: {
      int rc = osIoctl(pFile->h, F2FS_IOC_ABORT_VOLATILE_WRITE);
      return rc ? SQLITE_IOERR_ROLLBACK_ATOMIC : SQLITE_OK;
    }
#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */

    case SQLITE_FCNTL_LOCKSTATE: {
      *(int*)pArg = pFile->eFileLock;
      return SQLITE_OK;
    }
    case SQLITE_FCNTL_LAST_ERRNO: {
      *(int*)pArg = pFile->lastErrno;
      return SQLITE_OK;

    }
#endif /* SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__) */
  }
  return SQLITE_NOTFOUND;
}

/*
** If pFd->sectorSize is non-zero when this function is called, it is a
** no-op. Otherwise, the values of pFd->sectorSize and 
** pFd->deviceCharacteristics are set according to the file-system 
** characteristics. 
**
** There are two versions of this function. One for QNX and one for all


** other systems.
*/
#ifndef __QNXNTO__
static void setDeviceCharacteristics(unixFile *pFd){
  assert( pFd->deviceCharacteristics==0 || pFd->sectorSize!=0 );
  if( pFd->sectorSize==0 ){
#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
    int res;
    u32 f = 0;

    /* Check for support for F2FS atomic batch writes. */
    res = osIoctl(pFd->h, F2FS_IOC_GET_FEATURES, &f);
    if( res==0 && (f & F2FS_FEATURE_ATOMIC_WRITE) ){
      pFd->deviceCharacteristics = SQLITE_IOCAP_BATCH_ATOMIC;
    }
#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */

    /* Set the POWERSAFE_OVERWRITE flag if requested. */
    if( pFd->ctrlFlags & UNIXFILE_PSOW ){
      pFd->deviceCharacteristics |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
    }

    pFd->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;


  }
}
#else
#include <sys/dcmd_blk.h>
#include <sys/statvfs.h>

static void setDeviceCharacteristics(unixFile *pFile){
  if( pFile->sectorSize == 0 ){
    struct statvfs fsInfo;
       
    /* Set defaults for non-supported filesystems */
    pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
    pFile->deviceCharacteristics = 0;
    if( fstatvfs(pFile->h, &fsInfo) == -1 ) {

  }
  /* Last chance verification.  If the sector size isn't a multiple of 512
  ** then it isn't valid.*/
  if( pFile->sectorSize % 512 != 0 ){
    pFile->deviceCharacteristics = 0;
    pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
  }

}
#endif

/*
** Return the sector size in bytes of the underlying block device for
** the specified file. This is almost always 512 bytes, but may be
** larger for some devices.
**
** SQLite code assumes this function cannot fail. It also assumes that
** if two files are created in the same file-system directory (i.e.
** a database and its journal file) that the sector size will be the
** same for both.
*/
static int unixSectorSize(sqlite3_file *id){
  unixFile *pFd = (unixFile*)id;
  setDeviceCharacteristics(pFd);
  return pFd->sectorSize;
}

/*
** Return the device characteristics for the file.
**
** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default.
** However, that choice is controversial since technically the underlying
** file system does not always provide powersafe overwrites.  (In other
** words, after a power-loss event, parts of the file that were never
** written might end up being altered.)  However, non-PSOW behavior is very,
** very rare.  And asserting PSOW makes a large reduction in the amount
** of required I/O for journaling, since a lot of padding is eliminated.
**  Hence, while POWERSAFE_OVERWRITE is on by default, there is a file-control
** available to turn it off and URI query parameter available to turn it off.
*/
static int unixDeviceCharacteristics(sqlite3_file *id){
  unixFile *pFd = (unixFile*)id;



  setDeviceCharacteristics(pFd);




  return pFd->deviceCharacteristics;
}

#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0

/*
** Return the system page size.
**

    UNIXVFS("unix-proxy",    proxyIoFinder ),
#endif
  };
  unsigned int i;          /* Loop counter */

  /* Double-check that the aSyscall[] array has been constructed
  ** correctly.  See ticket [bb3a86e890c8e96ab] */
  assert( ArraySize(aSyscall)==29 );

  /* Register all VFSes defined in the aVfs[] array */
  for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
    sqlite3_vfs_register(&aVfs[i], i==0);
  }
  return SQLITE_OK; 
}

      assert( p->eLock==EXCLUSIVE_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      assert( !pagerUseWal(pPager) );
      assert( p->eLock>=EXCLUSIVE_LOCK );
      assert( isOpen(p->jfd) 
           || p->journalMode==PAGER_JOURNALMODE_OFF 
           || p->journalMode==PAGER_JOURNALMODE_WAL 
           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
      );
      assert( pPager->dbOrigSize<=pPager->dbHintSize );
      break;

    case PAGER_WRITER_FINISHED:
      assert( p->eLock==EXCLUSIVE_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      assert( !pagerUseWal(pPager) );
      assert( isOpen(p->jfd) 
           || p->journalMode==PAGER_JOURNALMODE_OFF 
           || p->journalMode==PAGER_JOURNALMODE_WAL 
           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
      );
      break;

    case PAGER_ERROR:
      /* There must be at least one outstanding reference to the pager if
      ** in ERROR state. Otherwise the pager should have already dropped
      ** back to OPEN state.

      IOTRACE(("LOCK %p %d\n", pPager, eLock))
    }
  }
  return rc;
}

/*
** This function determines whether or not the atomic-write or
** atomic-batch-write optimizations can be used with this pager. The
** atomic-write optimization can be used if:
**
**  (a) the value returned by OsDeviceCharacteristics() indicates that
**      a database page may be written atomically, and
**  (b) the value returned by OsSectorSize() is less than or equal
**      to the page size.
**
** If it can be used, then the value returned is the size of the journal 
** file when it contains rollback data for exactly one page.
**
** The atomic-batch-write optimization can be used if OsDeviceCharacteristics()
** returns a value with the SQLITE_IOCAP_BATCH_ATOMIC bit set. -1 is
** returned in this case.
**
** If neither optimization can be used, 0 is returned.


*/

static int jrnlBufferSize(Pager *pPager){
  assert( !MEMDB );

#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
 || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
  int dc;                           /* Device characteristics */



  assert( isOpen(pPager->fd) );
  dc = sqlite3OsDeviceCharacteristics(pPager->fd);
#endif

#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
  if( dc&SQLITE_IOCAP_BATCH_ATOMIC ){
    return -1;
  }
#endif

#ifdef SQLITE_ENABLE_ATOMIC_WRITE
  {
    int nSector = pPager->sectorSize;
    int szPage = pPager->pageSize;

    assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
    assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
    if( 0==(dc&(SQLITE_IOCAP_ATOMIC|(szPage>>8)) || nSector>szPage) ){
      return 0;
    }
  }

  return JOURNAL_HDR_SZ(pPager) + JOURNAL_PG_SZ(pPager);
#endif

  return 0;


}

/*
** If SQLITE_CHECK_PAGES is defined then we do some sanity checking
** on the cache using a hash function.  This is used for testing
** and debugging only.
*/
#ifdef SQLITE_CHECK_PAGES

  assert( assert_pager_state(pPager) );
  assert( pPager->eState!=PAGER_ERROR );
  if( pPager->eState<PAGER_WRITER_LOCKED && pPager->eLock<RESERVED_LOCK ){
    return SQLITE_OK;
  }

  releaseAllSavepoints(pPager);
  assert( isOpen(pPager->jfd) || pPager->pInJournal==0 
      || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
  );
  if( isOpen(pPager->jfd) ){
    assert( !pagerUseWal(pPager) );

    /* Finalize the journal file. */
    if( sqlite3JournalIsInMemory(pPager->jfd) ){
      /* assert( pPager->journalMode==PAGER_JOURNALMODE_MEMORY ); */
      sqlite3OsClose(pPager->jfd);

  if( pagerUseWal(pPager) ){
    /* Write a single frame for this page to the log. */
    rc = subjournalPageIfRequired(pPg); 
    if( rc==SQLITE_OK ){
      rc = pagerWalFrames(pPager, pPg, 0, 0);
    }
  }else{
    
#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
    if( pPager->tempFile==0 ){
      rc = sqlite3JournalCreate(pPager->jfd);
      if( rc!=SQLITE_OK ) return pager_error(pPager, rc);
    }
#endif
  
    /* Sync the journal file if required. */
    if( pPg->flags&PGHDR_NEED_SYNC 
     || pPager->eState==PAGER_WRITER_CACHEMOD
    ){
      rc = syncJournal(pPager, 1);
    }

        rc = pagerWalFrames(pPager, pList, pPager->dbSize, 1);
      }
      sqlite3PagerUnref(pPageOne);
      if( rc==SQLITE_OK ){
        sqlite3PcacheCleanAll(pPager->pPCache);
      }
    }else{
      /* The bBatch boolean is true if the batch-atomic-write commit method
      ** should be used.  No rollback journal is created if batch-atomic-write
      ** is enabled.
      */
      sqlite3_file *fd = pPager->fd;
#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
      const int bBatch = zMaster==0    /* An SQLITE_IOCAP_BATCH_ATOMIC commit */
        && (sqlite3OsDeviceCharacteristics(fd) & SQLITE_IOCAP_BATCH_ATOMIC)
        && !pPager->noSync
        && sqlite3JournalIsInMemory(pPager->jfd);
#else
# define bBatch 0
#endif

#ifdef SQLITE_ENABLE_ATOMIC_WRITE
      /* The following block updates the change-counter. Exactly how it
      ** does this depends on whether or not the atomic-update optimization
      ** was enabled at compile time, and if this transaction meets the 
      ** runtime criteria to use the operation: 
      **
      **    * The file-system supports the atomic-write property for
      **      blocks of size page-size, and 

      ** mode. 
      **
      ** Otherwise, if the optimization is both enabled and applicable,
      ** then call pager_incr_changecounter() to update the change-counter
      ** in 'direct' mode. In this case the journal file will never be
      ** created for this transaction.
      */
      if( bBatch==0 ){
        PgHdr *pPg;
        assert( isOpen(pPager->jfd) 
            || pPager->journalMode==PAGER_JOURNALMODE_OFF 
            || pPager->journalMode==PAGER_JOURNALMODE_WAL 
            );
        if( !zMaster && isOpen(pPager->jfd) 
         && pPager->journalOff==jrnlBufferSize(pPager) 
         && pPager->dbSize>=pPager->dbOrigSize
         && (!(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
        ){
          /* Update the db file change counter via the direct-write method. The 
          ** following call will modify the in-memory representation of page 1 
          ** to include the updated change counter and then write page 1 
          ** directly to the database file. Because of the atomic-write 
          ** property of the host file-system, this is safe.
          */
          rc = pager_incr_changecounter(pPager, 1);
        }else{
          rc = sqlite3JournalCreate(pPager->jfd);
          if( rc==SQLITE_OK ){
            rc = pager_incr_changecounter(pPager, 0);
          }
        }
      }
#else 
#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
      if( zMaster ){
        rc = sqlite3JournalCreate(pPager->jfd);
        if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
      }
#endif
      rc = pager_incr_changecounter(pPager, 0);
#endif
      if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
  
      /* Write the master journal name into the journal file. If a master 
      ** journal file name has already been written to the journal file, 
      ** or if zMaster is NULL (no master journal), then this call is a no-op.
      */
      rc = writeMasterJournal(pPager, zMaster);

      ** journal requires a sync here. However, in locking_mode=exclusive
      ** on a system under memory pressure it is just possible that this is 
      ** not the case. In this case it is likely enough that the redundant
      ** xSync() call will be changed to a no-op by the OS anyhow. 
      */
      rc = syncJournal(pPager, 0);
      if( rc!=SQLITE_OK ) goto commit_phase_one_exit;

      if( bBatch ){
        /* The pager is now in DBMOD state. But regardless of what happens
        ** next, attempting to play the journal back into the database would
        ** be unsafe. Close it now to make sure that does not happen.  */
        sqlite3OsClose(pPager->jfd);
        rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_BEGIN_ATOMIC_WRITE, 0);
        if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
      }
      rc = pager_write_pagelist(pPager,sqlite3PcacheDirtyList(pPager->pPCache));
      if( bBatch ){
        if( rc==SQLITE_OK ){
          rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_COMMIT_ATOMIC_WRITE, 0);
        }else{
          sqlite3OsFileControl(fd, SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE, 0);
        }
      }

      if( rc!=SQLITE_OK ){
        assert( rc!=SQLITE_IOERR_BLOCKED );
        goto commit_phase_one_exit;
      }
      sqlite3PcacheCleanAll(pPager->pPCache);

      /* If the file on disk is smaller than the database image, use 

#define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))
#define SQLITE_IOERR_DELETE_NOENT      (SQLITE_IOERR | (23<<8))
#define SQLITE_IOERR_MMAP              (SQLITE_IOERR | (24<<8))
#define SQLITE_IOERR_GETTEMPPATH       (SQLITE_IOERR | (25<<8))
#define SQLITE_IOERR_CONVPATH          (SQLITE_IOERR | (26<<8))
#define SQLITE_IOERR_VNODE             (SQLITE_IOERR | (27<<8))
#define SQLITE_IOERR_AUTH              (SQLITE_IOERR | (28<<8))
#define SQLITE_IOERR_BEGIN_ATOMIC      (SQLITE_IOERR | (29<<8))
#define SQLITE_IOERR_COMMIT_ATOMIC     (SQLITE_IOERR | (30<<8))
#define SQLITE_IOERR_ROLLBACK_ATOMIC   (SQLITE_IOERR | (31<<8))
#define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
#define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
#define SQLITE_BUSY_SNAPSHOT           (SQLITE_BUSY   |  (2<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
#define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
#define SQLITE_CANTOPEN_CONVPATH       (SQLITE_CANTOPEN | (4<<8))

** file that were written at the application level might have changed
** and that adjacent bytes, even bytes within the same sector are
** guaranteed to be unchanged.  The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
** flag indicates that a file cannot be deleted when open.  The
** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
** read-only media and cannot be changed even by processes with
** elevated privileges.
**
** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
** filesystem supports doing multiple write operations atomically when those
** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
*/
#define SQLITE_IOCAP_ATOMIC                 0x00000001
#define SQLITE_IOCAP_ATOMIC512              0x00000002
#define SQLITE_IOCAP_ATOMIC1K               0x00000004
#define SQLITE_IOCAP_ATOMIC2K               0x00000008
#define SQLITE_IOCAP_ATOMIC4K               0x00000010
#define SQLITE_IOCAP_ATOMIC8K               0x00000020
#define SQLITE_IOCAP_ATOMIC16K              0x00000040
#define SQLITE_IOCAP_ATOMIC32K              0x00000080
#define SQLITE_IOCAP_ATOMIC64K              0x00000100
#define SQLITE_IOCAP_SAFE_APPEND            0x00000200
#define SQLITE_IOCAP_SEQUENTIAL             0x00000400
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN  0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE    0x00001000
#define SQLITE_IOCAP_IMMUTABLE              0x00002000
#define SQLITE_IOCAP_BATCH_ATOMIC           0x00004000

/*
** CAPI3REF: File Locking Levels
**
** SQLite uses one of these integer values as the second
** argument to calls it makes to the xLock() and xUnlock() methods
** of an [sqlite3_io_methods] object.

** <li> [SQLITE_IOCAP_ATOMIC32K]
** <li> [SQLITE_IOCAP_ATOMIC64K]
** <li> [SQLITE_IOCAP_SAFE_APPEND]
** <li> [SQLITE_IOCAP_SEQUENTIAL]
** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
** <li> [SQLITE_IOCAP_IMMUTABLE]
** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
** any size are atomic.  The SQLITE_IOCAP_ATOMICnnn values
** mean that writes of blocks that are nnn bytes in size and
** are aligned to an address which is an integer multiple of
** nnn are atomic.  The SQLITE_IOCAP_SAFE_APPEND value means

** The [SQLITE_FCNTL_ZIPVFS] opcode is implemented by zipvfs only. All other
** VFS should return SQLITE_NOTFOUND for this opcode.
**
** <li>[[SQLITE_FCNTL_RBU]]
** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
** the RBU extension only.  All other VFS should return SQLITE_NOTFOUND for
** this opcode.  
**
** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
** the file descriptor is placed in "batch write mode", which
** means all subsequent write operations will be deferred and done
** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].  Systems
** that do not support batch atomic writes will return SQLITE_NOTFOUND.
** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
** no VFS interface calls on the same [sqlite3_file] file descriptor
** except for calls to the xWrite method and the xFileControl method
** with [SQLITE_FCNTL_SIZE_HINT].
**
** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
** operations since the previous successful call to 
** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
** This file control returns [SQLITE_OK] if and only if the writes were
** all performed successfully and have been committed to persistent storage.
** ^Regardless of whether or not it is successful, this file control takes
** the file descriptor out of batch write mode so that all subsequent
** write operations are independent.
** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
**
** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
** operations since the previous successful call to 
** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
** ^This file control takes the file descriptor out of batch write mode
** so that all subsequent write operations are independent.
** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE               1
#define SQLITE_FCNTL_GET_LOCKPROXYFILE       2
#define SQLITE_FCNTL_SET_LOCKPROXYFILE       3
#define SQLITE_FCNTL_LAST_ERRNO              4
#define SQLITE_FCNTL_SIZE_HINT               5

#define SQLITE_FCNTL_WAL_BLOCK              24
#define SQLITE_FCNTL_ZIPVFS                 25
#define SQLITE_FCNTL_RBU                    26
#define SQLITE_FCNTL_VFS_POINTER            27
#define SQLITE_FCNTL_JOURNAL_POINTER        28
#define SQLITE_FCNTL_WIN32_GET_HANDLE       29
#define SQLITE_FCNTL_PDB                    30
#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE     31
#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE    32
#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE  33

/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
#define SQLITE_SET_LOCKPROXYFILE      SQLITE_FCNTL_SET_LOCKPROXYFILE
#define SQLITE_LAST_ERRNO             SQLITE_FCNTL_LAST_ERRNO

** The default value of "20" was choosen to minimize the run-time of the
** speedtest1 test program with options: --shrink-memory --reprepare
*/
#ifndef SQLITE_DEFAULT_PCACHE_INITSZ
# define SQLITE_DEFAULT_PCACHE_INITSZ 20
#endif

/*
** The compile-time options SQLITE_MMAP_READWRITE and 
** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another.
** You must choose one or the other (or neither) but not both.
*/
#if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
#error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE
#endif

/*
** GCC does not define the offsetof() macro so we'll have to do it
** ourselves.
*/
#ifndef offsetof
#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD))
#endif

#define IN_INDEX_NOOP_OK     0x0001  /* OK to return IN_INDEX_NOOP */
#define IN_INDEX_MEMBERSHIP  0x0002  /* IN operator used for membership test */
#define IN_INDEX_LOOP        0x0004  /* IN operator used as a loop */
int sqlite3FindInIndex(Parse *, Expr *, u32, int*, int*);

int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
int sqlite3JournalSize(sqlite3_vfs *);
#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
 || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
  int sqlite3JournalCreate(sqlite3_file *);
#endif

int sqlite3JournalIsInMemory(sqlite3_file *p);
void sqlite3MemJournalOpen(sqlite3_file *);

void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p);

  }
  zFile = (const char*)Tcl_GetString(objv[1]);
  rc = sqlite3_delete_database(zFile);

  Tcl_SetObjResult(interp, Tcl_NewStringObj(sqlite3ErrName(rc), -1));
  return TCL_OK;
}

/*
** Usage: atomic_batch_write PATH
*/
static int SQLITE_TCLAPI test_atomic_batch_write(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  char *zFile = 0;                /* Path to file to test */
  sqlite3 *db = 0;                /* Database handle */
  sqlite3_file *pFd = 0;          /* SQLite fd open on zFile */
  int bRes = 0;                   /* Integer result of this command */
  int dc = 0;                     /* Device-characteristics mask */
  int rc;                         /* sqlite3_open() return code */

  if( objc!=2 ){
    Tcl_WrongNumArgs(interp, 1, objv, "PATH");
    return TCL_ERROR;
  }
  zFile = Tcl_GetString(objv[1]);

  rc = sqlite3_open(zFile, &db);
  if( rc!=SQLITE_OK ){
    Tcl_AppendResult(interp, sqlite3_errmsg(db), 0);
    sqlite3_close(db);
    return TCL_ERROR;
  }

  rc = sqlite3_file_control(db, "main", SQLITE_FCNTL_FILE_POINTER, (void*)&pFd);
  dc = pFd->pMethods->xDeviceCharacteristics(pFd);
  if( dc & SQLITE_IOCAP_BATCH_ATOMIC ){
    bRes = 1;
  }

  Tcl_SetObjResult(interp, Tcl_NewIntObj(bRes));
  sqlite3_close(db);
  return TCL_OK;
}

/*
** Usage:  sqlite3_next_stmt  DB  STMT
**
** Return the next statment in sequence after STMT.
*/
static int SQLITE_TCLAPI test_next_stmt(

     { "sqlite3_snapshot_cmp", test_snapshot_cmp, 0 },
     { "sqlite3_snapshot_recover", test_snapshot_recover, 0 },
     { "sqlite3_snapshot_get_blob", test_snapshot_get_blob, 0 },
     { "sqlite3_snapshot_open_blob", test_snapshot_open_blob, 0 },
     { "sqlite3_snapshot_cmp_blob", test_snapshot_cmp_blob, 0 },
#endif
     { "sqlite3_delete_database", test_delete_database, 0 },
     { "atomic_batch_write",      test_atomic_batch_write,     0   },
  };
  static int bitmask_size = sizeof(Bitmask)*8;
  static int longdouble_size = sizeof(LONGDOUBLE_TYPE);
  int i;
  extern int sqlite3_sync_count, sqlite3_fullsync_count;
  extern int sqlite3_opentemp_count;
  extern int sqlite3_like_count;

    { "atomic8k",            SQLITE_IOCAP_ATOMIC8K              },
    { "atomic16k",           SQLITE_IOCAP_ATOMIC16K             },
    { "atomic32k",           SQLITE_IOCAP_ATOMIC32K             },
    { "atomic64k",           SQLITE_IOCAP_ATOMIC64K             },
    { "sequential",          SQLITE_IOCAP_SEQUENTIAL            },
    { "safe_append",         SQLITE_IOCAP_SAFE_APPEND           },
    { "powersafe_overwrite", SQLITE_IOCAP_POWERSAFE_OVERWRITE   },
    { "batch-atomic",        SQLITE_IOCAP_BATCH_ATOMIC          },
    { 0, 0 }
  };

  int i;
  int iDc = 0;
  int iSectorSize = 0;
  int setSectorsize = 0;

  if( processDevSymArgs(interp, objc-1, &objv[1], &iDc, &iSectorSize) ){
    return TCL_ERROR;
  }
  devsym_register(iDc, iSectorSize);

  return TCL_OK;
}

/*
** tclcmd: sqlite3_crash_on_write N
*/
static int SQLITE_TCLAPI writeCrashObjCmd(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  void devsym_crash_on_write(int);
  int nWrite = 0;

  if( objc!=2 ){
    Tcl_WrongNumArgs(interp, 1, objv, "NWRITE");
    return TCL_ERROR;
  }
  if( Tcl_GetIntFromObj(interp, objv[1], &nWrite) ){
    return TCL_ERROR;
  }

  devsym_crash_on_write(nWrite);
  return TCL_OK;
}

/*
** tclcmd: unregister_devsim
*/
static int SQLITE_TCLAPI dsUnregisterObjCmd(
  void * clientData,

*/
int Sqlitetest6_Init(Tcl_Interp *interp){
#ifndef SQLITE_OMIT_DISKIO
  Tcl_CreateObjCommand(interp, "sqlite3_crash_enable", crashEnableCmd, 0, 0);
  Tcl_CreateObjCommand(interp, "sqlite3_crashparams", crashParamsObjCmd, 0, 0);
  Tcl_CreateObjCommand(interp, "sqlite3_crash_now", crashNowCmd, 0, 0);
  Tcl_CreateObjCommand(interp, "sqlite3_simulate_device", devSymObjCmd, 0, 0);
  Tcl_CreateObjCommand(interp, "sqlite3_crash_on_write", writeCrashObjCmd,0,0);
  Tcl_CreateObjCommand(interp, "unregister_devsim", dsUnregisterObjCmd, 0, 0);
  Tcl_CreateObjCommand(interp, "register_jt_vfs", jtObjCmd, 0, 0);
  Tcl_CreateObjCommand(interp, "unregister_jt_vfs", jtUnregisterObjCmd, 0, 0);
#endif
  return TCL_OK;
}

#endif /* SQLITE_TEST */

*/
#define DEVSYM_MAX_PATHNAME 512

/*
** Name used to identify this VFS.
*/
#define DEVSYM_VFS_NAME "devsym"
#define WRITECRASH_NAME "writecrash"

typedef struct devsym_file devsym_file;
struct devsym_file {
  sqlite3_file base;
  sqlite3_file *pReal;
};

static void (*devsymDlSym(sqlite3_vfs*,void*, const char *zSymbol))(void);
static void devsymDlClose(sqlite3_vfs*, void*);
#endif /* SQLITE_OMIT_LOAD_EXTENSION */
static int devsymRandomness(sqlite3_vfs*, int nByte, char *zOut);
static int devsymSleep(sqlite3_vfs*, int microseconds);
static int devsymCurrentTime(sqlite3_vfs*, double*);


















































struct DevsymGlobal {
  sqlite3_vfs *pVfs;
  int iDeviceChar;
  int iSectorSize;
  int nWriteCrash;
};
struct DevsymGlobal g = {0, 0, 512, 0};

/*
** Close an devsym-file.
*/
static int devsymClose(sqlite3_file *pFile){
  devsym_file *p = (devsym_file *)pFile;
  sqlite3OsClose(p->pReal);

static int devsymOpen(
  sqlite3_vfs *pVfs,
  const char *zName,
  sqlite3_file *pFile,
  int flags,
  int *pOutFlags
){
static sqlite3_io_methods devsym_io_methods = {
  2,                                /* iVersion */
  devsymClose,                      /* xClose */
  devsymRead,                       /* xRead */
  devsymWrite,                      /* xWrite */
  devsymTruncate,                   /* xTruncate */
  devsymSync,                       /* xSync */
  devsymFileSize,                   /* xFileSize */
  devsymLock,                       /* xLock */
  devsymUnlock,                     /* xUnlock */
  devsymCheckReservedLock,          /* xCheckReservedLock */
  devsymFileControl,                /* xFileControl */
  devsymSectorSize,                 /* xSectorSize */
  devsymDeviceCharacteristics,      /* xDeviceCharacteristics */
  devsymShmMap,                     /* xShmMap */
  devsymShmLock,                    /* xShmLock */
  devsymShmBarrier,                 /* xShmBarrier */
  devsymShmUnmap                    /* xShmUnmap */
};

  int rc;
  devsym_file *p = (devsym_file *)pFile;
  p->pReal = (sqlite3_file *)&p[1];
  rc = sqlite3OsOpen(g.pVfs, zName, p->pReal, flags, pOutFlags);
  if( p->pReal->pMethods ){
    pFile->pMethods = &devsym_io_methods;
  }

/*
** Return the current time as a Julian Day number in *pTimeOut.
*/
static int devsymCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){
  return g.pVfs->xCurrentTime(g.pVfs, pTimeOut);
}

/*
** Return the sector-size in bytes for an writecrash-file.
*/
static int writecrashSectorSize(sqlite3_file *pFile){
  devsym_file *p = (devsym_file *)pFile;
  return sqlite3OsSectorSize(p->pReal);
}

/*
** Return the device characteristic flags supported by an writecrash-file.
*/
static int writecrashDeviceCharacteristics(sqlite3_file *pFile){
  devsym_file *p = (devsym_file *)pFile;
  return sqlite3OsDeviceCharacteristics(p->pReal);
}

/*
** Write data to an writecrash-file.
*/
static int writecrashWrite(
  sqlite3_file *pFile, 
  const void *zBuf, 
  int iAmt, 
  sqlite_int64 iOfst
){
  devsym_file *p = (devsym_file *)pFile;
  if( g.nWriteCrash>0 ){
    g.nWriteCrash--;
    if( g.nWriteCrash==0 ) abort();
  }
  return sqlite3OsWrite(p->pReal, zBuf, iAmt, iOfst);
}

/*
** Open an writecrash file handle.
*/
static int writecrashOpen(
  sqlite3_vfs *pVfs,
  const char *zName,
  sqlite3_file *pFile,
  int flags,
  int *pOutFlags
){
static sqlite3_io_methods writecrash_io_methods = {
  2,                                /* iVersion */
  devsymClose,                      /* xClose */
  devsymRead,                       /* xRead */
  writecrashWrite,                  /* xWrite */
  devsymTruncate,                   /* xTruncate */
  devsymSync,                       /* xSync */
  devsymFileSize,                   /* xFileSize */
  devsymLock,                       /* xLock */
  devsymUnlock,                     /* xUnlock */
  devsymCheckReservedLock,          /* xCheckReservedLock */
  devsymFileControl,                /* xFileControl */
  writecrashSectorSize,             /* xSectorSize */
  writecrashDeviceCharacteristics,  /* xDeviceCharacteristics */
  devsymShmMap,                     /* xShmMap */
  devsymShmLock,                    /* xShmLock */
  devsymShmBarrier,                 /* xShmBarrier */
  devsymShmUnmap                    /* xShmUnmap */
};

  int rc;
  devsym_file *p = (devsym_file *)pFile;
  p->pReal = (sqlite3_file *)&p[1];
  rc = sqlite3OsOpen(g.pVfs, zName, p->pReal, flags, pOutFlags);
  if( p->pReal->pMethods ){
    pFile->pMethods = &writecrash_io_methods;
  }
  return rc;
}

static sqlite3_vfs devsym_vfs = {
  2,                     /* iVersion */
  sizeof(devsym_file),      /* szOsFile */
  DEVSYM_MAX_PATHNAME,      /* mxPathname */
  0,                     /* pNext */
  DEVSYM_VFS_NAME,          /* zName */
  0,                     /* pAppData */
  devsymOpen,               /* xOpen */
  devsymDelete,             /* xDelete */
  devsymAccess,             /* xAccess */
  devsymFullPathname,       /* xFullPathname */
#ifndef SQLITE_OMIT_LOAD_EXTENSION
  devsymDlOpen,             /* xDlOpen */
  devsymDlError,            /* xDlError */
  devsymDlSym,              /* xDlSym */
  devsymDlClose,            /* xDlClose */
#else
  0,                        /* xDlOpen */
  0,                        /* xDlError */
  0,                        /* xDlSym */
  0,                        /* xDlClose */
#endif /* SQLITE_OMIT_LOAD_EXTENSION */
  devsymRandomness,         /* xRandomness */
  devsymSleep,              /* xSleep */
  devsymCurrentTime,        /* xCurrentTime */
  0,                        /* xGetLastError */
  0                         /* xCurrentTimeInt64 */
};

static sqlite3_vfs writecrash_vfs = {
  2,                     /* iVersion */
  sizeof(devsym_file),      /* szOsFile */
  DEVSYM_MAX_PATHNAME,      /* mxPathname */
  0,                     /* pNext */
  WRITECRASH_NAME,          /* zName */
  0,                     /* pAppData */
  writecrashOpen,           /* xOpen */
  devsymDelete,             /* xDelete */
  devsymAccess,             /* xAccess */
  devsymFullPathname,       /* xFullPathname */
#ifndef SQLITE_OMIT_LOAD_EXTENSION
  devsymDlOpen,             /* xDlOpen */
  devsymDlError,            /* xDlError */
  devsymDlSym,              /* xDlSym */
  devsymDlClose,            /* xDlClose */
#else
  0,                        /* xDlOpen */
  0,                        /* xDlError */
  0,                        /* xDlSym */
  0,                        /* xDlClose */
#endif /* SQLITE_OMIT_LOAD_EXTENSION */
  devsymRandomness,         /* xRandomness */
  devsymSleep,              /* xSleep */
  devsymCurrentTime,        /* xCurrentTime */
  0,                        /* xGetLastError */
  0                         /* xCurrentTimeInt64 */
};


/*
** This procedure registers the devsym vfs with SQLite. If the argument is
** true, the devsym vfs becomes the new default vfs. It is the only publicly
** available function in this file.
*/
void devsym_register(int iDeviceChar, int iSectorSize){

  if( g.pVfs==0 ){
    g.pVfs = sqlite3_vfs_find(0);
    devsym_vfs.szOsFile += g.pVfs->szOsFile;
    writecrash_vfs.szOsFile += g.pVfs->szOsFile;
    sqlite3_vfs_register(&devsym_vfs, 0);
    sqlite3_vfs_register(&writecrash_vfs, 0);
  }
  if( iDeviceChar>=0 ){
    g.iDeviceChar = iDeviceChar;
  }else{
    g.iDeviceChar = 0;
  }
  if( iSectorSize>=0 ){
    g.iSectorSize = iSectorSize;
  }else{
    g.iSectorSize = 512;
  }
}

void devsym_unregister(){
  sqlite3_vfs_unregister(&devsym_vfs);
  g.pVfs = 0;
  g.iDeviceChar = 0;
  g.iSectorSize = 0;
}

void devsym_crash_on_write(int nWrite){
  if( g.pVfs==0 ){
    g.pVfs = sqlite3_vfs_find(0);
    devsym_vfs.szOsFile += g.pVfs->szOsFile;
    writecrash_vfs.szOsFile += g.pVfs->szOsFile;
    sqlite3_vfs_register(&devsym_vfs, 0);
    sqlite3_vfs_register(&writecrash_vfs, 0);
  }
  g.nWriteCrash = nWrite;
}

#endif

# 2015-11-07
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the WITH clause.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
set ::testprefix atomic

db close
if {[atomic_batch_write test.db]==0} {
  puts "No f2fs atomic-batch-write support. Skipping tests..."
  finish_test
  return
}

reset_db

do_execsql_test 1.0 {
  CREATE TABLE t1(x, y);
  BEGIN;
    INSERT INTO t1 VALUES(1, 2);
}

do_test 1.1 { file exists test.db-journal } {0}

do_execsql_test 1.2 {
  COMMIT;
}


finish_test

#
# We need to check this to verify that if in the unlikely event a rollback
# causes a database file to grow, the database grows to its previous size
# on disk, not to the minimum size required to hold the database image.
#
do_test fallocate-1.7 {
  execsql { BEGIN; INSERT INTO t1 VALUES(1, 2); }
  if {[permutation] != "inmemory_journal"
   && [permutation] != "atomic-batch-write"
  } {
    hexio_get_int [hexio_read test.db-journal 16 4]
  } else {
    set {} 1024
  }
} {1024}
do_test fallocate-1.8 { execsql { COMMIT } } {}

# The following tests can only work if the current SQLite VFS has the concept
# of a current directory.
#
ifcapable curdir {
# Make sure a database connection still works after changing the
# working directory.
#
if {[atomic_batch_write test.db]==0} {
  do_test misc1-14.1 {
    file mkdir tempdir
    cd tempdir
    execsql {BEGIN}
    file exists ./test.db-journal
  } {0}
  do_test misc1-14.2a {
    execsql {UPDATE t1 SET a=a||'x' WHERE 0}
    file exists ../test.db-journal
  } {0}
  do_test misc1-14.2b {
    execsql {UPDATE t1 SET a=a||'y' WHERE 1}
    file exists ../test.db-journal
  } {1}
  do_test misc1-14.3 {
    cd ..
    forcedelete tempdir
    execsql {COMMIT}
    file exists ./test.db-journal
  } {0}
}
}

# A failed create table should not leave the table in the internal
# data structures.  Ticket #238.
#
do_test misc1-15.1.1 {
  catchsql {

  which do not work with a VFS that uses the pVfs argument passed to
  sqlite3_vfs methods.
} -files [
  test_set $allquicktests -exclude *malloc* *ioerr* *fault* oserror.test \
  pager1.test syscall.test sysfault.test tkt3457.test quota* superlock* \
  wal* mmap*
]

test_suite "atomic-batch-write" -prefix "" -description {
  Like veryquick.test, but must be run on a file-system that supports
  atomic-batch-writes. Tests that depend on the journal file being present
  are omitted.
} -files [
  test_set $allquicktests -exclude *malloc* *ioerr* *fault* *bigfile* *_err* \
      *fts5corrupt* *fts5big* *fts5aj*  \
      crash8.test delete_db.test        \
      exclusive.test journal3.test      \
      journal1.test                     \
      jrnlmode.test jrnlmode2.test      \
      lock4.test pager1.test            \
      pager3.test sharedA.test          \
      symlink.test stmt.test            \
      sync.test sync2.test              \
      tempdb.test tkt3457.test          \
      vacuum5.test wal2.test            \
      walmode.test zerodamage.test
] -initialize {
  if {[atomic_batch_write test.db]==0} {
    error "File system does NOT support atomic-batch-write"
  }
}

lappend ::testsuitelist xxx
#-------------------------------------------------------------------------
# Define the coverage related test suites:
#
#   coverage-wal
#

do_test rollback-1.9 {
  sqlite3_finalize $STMT
} {SQLITE_OK}

if {$tcl_platform(platform) == "unix" 
 && [permutation] ne "onefile"
 && [permutation] ne "inmemory_journal"
 && [permutation] ne "atomic-batch-write"
} {
  do_test rollback-2.1 {
    execsql {
      BEGIN;
      INSERT INTO t3 VALUES('hello world');
    }
    forcecopy test.db testA.db

# Tests for the xNextSystemCall method.
#
foreach s {
    open close access getcwd stat fstat ftruncate
    fcntl read pread write pwrite fchmod fallocate
    pread64 pwrite64 unlink openDirectory mkdir rmdir 
    statvfs fchown geteuid umask mmap munmap mremap
    getpagesize readlink lstat ioctl
} {
  if {[test_syscall exists $s]} {lappend syscall_list $s}
}
do_test 3.1 { lsort [test_syscall list] } [lsort $syscall_list]

#-------------------------------------------------------------------------
# This test verifies that if a call to open() fails and errno is set to

    puts $f $tclbody
  }
  if {[string length $sql]>0} {
    puts $f "db eval {"
    puts $f   "$sql"
    puts $f "}"
  }
  close $f
  set r [catch {
    exec [info nameofexec] crash.tcl >@stdout
  } msg]

  # Windows/ActiveState TCL returns a slightly different
  # error message.  We map that to the expected message
  # so that we don't have to change all of the test
  # cases.
  if {$::tcl_platform(platform)=="windows"} {
    if {$msg=="child killed: unknown signal"} {
      set msg "child process exited abnormally"
    }
  }

  lappend r $msg
}

#   crash_on_write ?-devchar DEVCHAR? CRASHDELAY SQL
#
proc crash_on_write {args} {

  set nArg [llength $args]
  if {$nArg<2 || $nArg%2} {
    error "bad args: $args"
  }
  set zSql [lindex $args end]
  set nDelay [lindex $args end-1]

  set devchar {}
  for {set ii 0} {$ii < $nArg-2} {incr ii 2} {
    set opt [lindex $args $ii]
    switch -- [lindex $args $ii] {
      -devchar {
        set devchar [lindex $args [expr $ii+1]]
      }

      default { error "unrecognized option: $opt" }
    }
  }

  set f [open crash.tcl w]
  puts $f "sqlite3_crash_on_write $nDelay"
  puts $f "sqlite3_test_control_pending_byte $::sqlite_pending_byte"
  puts $f "sqlite3 db test.db -vfs writecrash"
  puts $f "db eval {$zSql}"
  puts $f "set {} {}"

  close $f
  set r [catch {
    exec [info nameofexec] crash.tcl >@stdout
  } msg]

  # Windows/ActiveState TCL returns a slightly different
  # error message.  We map that to the expected message

# 2009 January 8
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# Test the outcome of a writer crashing within a call to the VFS
# xWrite function.
#


set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix writecrash

do_not_use_codec


if {$tcl_platform(platform)=="windows"} {
  finish_test
  return
}

do_execsql_test 1.0 {
  CREATE TABLE t1(a INTEGER PRIMARY KEY, b BLOB UNIQUE);
  WITH s(i) AS (
    VALUES(1) UNION ALL SELECT i+1 FROM s WHERE i<100
  )
  INSERT INTO t1 SELECT NULL, randomblob(900) FROM s;
} {}

set bGo 1
for {set tn 1} {$bGo} {incr tn} {

db close
sqlite3 db test.db

  do_test 1.$tn.1 {
    set res [crash_on_write $tn {
      UPDATE t1 SET b = randomblob(899) WHERE (a%3)==0
    }]
    set bGo 0
    if {[string match {1 {child killed:*}} $res]} {
      set res {0 {}}
      set bGo 1
    }
    set res
  } {0 {}}

#db close
#sqlite3 db test.db

  do_execsql_test 1.$tn.2 { PRAGMA integrity_check } {ok}

db close
sqlite3 db test.db

  do_execsql_test 1.$tn.3 { PRAGMA integrity_check } {ok}
}



finish_test