SQLite

LTINSTALL = $(LIBTOOL) --mode=install $(INSTALL)

# nawk compatible awk.
NAWK = @AWK@

# You should not have to change anything below this line
###############################################################################

USE_AMALGAMATION = @USE_AMALGAMATION@

# Object files for the SQLite library (non-amalgamation).
#
LIBOBJS0 = alter.lo analyze.lo attach.lo auth.lo \
         backup.lo bitvec.lo btmutex.lo btree.lo build.lo \
         callback.lo complete.lo ctime.lo date.lo delete.lo expr.lo fault.lo fkey.lo \
         fts3.lo fts3_expr.lo fts3_hash.lo fts3_icu.lo fts3_porter.lo \
         fts3_snippet.lo fts3_tokenizer.lo fts3_tokenizer1.lo fts3_write.lo \
         func.lo global.lo hash.lo \
         icu.lo insert.lo journal.lo legacy.lo loadext.lo \
         main.lo malloc.lo mem0.lo mem1.lo mem2.lo mem3.lo mem5.lo \
         memjournal.lo \
         mutex.lo mutex_noop.lo mutex_os2.lo mutex_unix.lo mutex_w32.lo \
         notify.lo opcodes.lo os.lo os_os2.lo os_unix.lo os_win.lo \
         pager.lo parse.lo pcache.lo pcache1.lo pragma.lo prepare.lo printf.lo \
         random.lo resolve.lo rowset.lo rtree.lo select.lo status.lo \
         table.lo tokenize.lo trigger.lo \
         update.lo util.lo vacuum.lo \
         vdbe.lo vdbeapi.lo vdbeaux.lo vdbeblob.lo vdbemem.lo vdbetrace.lo \
         wal.lo walker.lo where.lo utf.o vtab.lo

# Object files for the amalgamation.
#
LIBOBJS1 = sqlite3.lo

# Determine the real value of LIBOBJ based on the 'configure' script
#

LIBOBJ = $(LIBOBJS$(USE_AMALGAMATION))


# All of the source code files.
#
SRC = \
  $(TOP)/src/alter.c \
  $(TOP)/src/analyze.c \

  $(TOP)/src/vdbeapi.c \
  $(TOP)/src/vdbeaux.c \
  $(TOP)/src/vdbeblob.c \
  $(TOP)/src/vdbemem.c \
  $(TOP)/src/vdbetrace.c \
  $(TOP)/src/vdbeInt.h \
  $(TOP)/src/vtab.c \
  $(TOP)/src/wal.c \
  $(TOP)/src/wal.h \
  $(TOP)/src/walker.c \
  $(TOP)/src/where.c












# Source code for extensions
#
SRC += \
  $(TOP)/ext/fts1/fts1.c \
  $(TOP)/ext/fts1/fts1.h \
  $(TOP)/ext/fts1/fts1_hash.c \
  $(TOP)/ext/fts1/fts1_hash.h \

SRC += \
  $(TOP)/ext/rtree/rtree.h \
  $(TOP)/ext/rtree/rtree.c
SRC += \
  $(TOP)/ext/sqlrr/sqlrr.h \
  $(TOP)/ext/sqlrr/sqlrr.c


# Generated source code files
#
SRC += \
  keywordhash.h \










  opcodes.c \




  opcodes.h \









  parse.c \





  parse.h \
  config.h \
  sqlite3.h

# Source code to the test files.
#
TESTSRC = \
  $(TOP)/src/test1.c \
  $(TOP)/src/test2.c \
  $(TOP)/src/test3.c \
  $(TOP)/src/test4.c \
  $(TOP)/src/test5.c \
  $(TOP)/src/test6.c \
  $(TOP)/src/test7.c \
  $(TOP)/src/test8.c \
  $(TOP)/src/test9.c \
  $(TOP)/src/test_autoext.c \
  $(TOP)/src/test_async.c \
  $(TOP)/src/test_backup.c \
  $(TOP)/src/test_btree.c \
  $(TOP)/src/test_config.c \
  $(TOP)/src/test_demovfs.c \
  $(TOP)/src/test_devsym.c \
  $(TOP)/src/test_func.c \
  $(TOP)/src/test_hexio.c \
  $(TOP)/src/test_init.c \
  $(TOP)/src/test_intarray.c \
  $(TOP)/src/test_journal.c \
  $(TOP)/src/test_malloc.c \
  $(TOP)/src/test_mutex.c \
  $(TOP)/src/test_onefile.c \
  $(TOP)/src/test_osinst.c \
  $(TOP)/src/test_pcache.c \
  $(TOP)/src/test_schema.c \
  $(TOP)/src/test_server.c \
  $(TOP)/src/test_stat.c \
  $(TOP)/src/test_tclvar.c \
  $(TOP)/src/test_thread.c \
  $(TOP)/src/test_vfs.c \
  $(TOP)/src/test_wsd.c

# Source code to the library files needed by the test fixture
#
TESTSRC2 = \
  $(TOP)/src/attach.c \
  $(TOP)/src/backup.c \
  $(TOP)/src/bitvec.c \
  $(TOP)/src/btree.c \
  $(TOP)/src/build.c \
  $(TOP)/src/ctime.c \
  $(TOP)/src/date.c \
  $(TOP)/src/expr.c \
  $(TOP)/src/func.c \
  $(TOP)/src/insert.c \
  $(TOP)/src/wal.c \
  $(TOP)/src/mem5.c \
  $(TOP)/src/os.c \
  $(TOP)/src/os_os2.c \
  $(TOP)/src/os_unix.c \
  $(TOP)/src/os_win.c \
  $(TOP)/src/pager.c \
  $(TOP)/src/pragma.c \
  $(TOP)/src/prepare.c \
  $(TOP)/src/printf.c \
  $(TOP)/src/random.c \
  $(TOP)/src/pcache.c \
  $(TOP)/src/pcache1.c \
  $(TOP)/src/select.c \
  $(TOP)/src/tokenize.c \
  $(TOP)/src/utf.c \
  $(TOP)/src/util.c \
  $(TOP)/src/vdbeapi.c \
  $(TOP)/src/vdbeaux.c \
  $(TOP)/src/vdbe.c \
  $(TOP)/src/vdbemem.c \
  $(TOP)/src/vdbetrace.c \
  $(TOP)/src/where.c \
  parse.c \
  $(TOP)/ext/fts3/fts3.c \
  $(TOP)/ext/fts3/fts3_expr.c \
  $(TOP)/ext/fts3/fts3_tokenizer.c \
  $(TOP)/ext/fts3/fts3_write.c \
  $(TOP)/ext/async/sqlite3async.c

# Header files used by all library source files.
#
HDR = \

   $(TOP)/src/btree.h \
   $(TOP)/src/btreeInt.h \
   $(TOP)/src/hash.h \
   $(TOP)/src/hwtime.h \
   keywordhash.h \
   $(TOP)/src/mutex.h \
   opcodes.h \
   $(TOP)/src/os.h \
   $(TOP)/src/os_common.h \
   $(TOP)/src/pager.h \
   $(TOP)/src/pcache.h \
   parse.h  \
   sqlite3.h  \
   $(TOP)/src/sqlite3ext.h \
   $(TOP)/src/sqliteInt.h  \
   $(TOP)/src/sqliteLimit.h \
   $(TOP)/src/vdbe.h \
   $(TOP)/src/vdbeInt.h \

   config.h

# Header files used by extensions
#
EXTHDR += \
  $(TOP)/ext/fts1/fts1.h \
  $(TOP)/ext/fts1/fts1_hash.h \
  $(TOP)/ext/fts1/fts1_tokenizer.h
EXTHDR += \
  $(TOP)/ext/fts2/fts2.h \
  $(TOP)/ext/fts2/fts2_hash.h \
  $(TOP)/ext/fts2/fts2_tokenizer.h
EXTHDR += \
  $(TOP)/ext/fts3/fts3.h \
  $(TOP)/ext/fts3/fts3Int.h \
  $(TOP)/ext/fts3/fts3_hash.h \
  $(TOP)/ext/fts3/fts3_tokenizer.h
EXTHDR += \
  $(TOP)/ext/rtree/rtree.h
EXTHDR += \
  $(TOP)/ext/icu/sqliteicu.h
EXTHDR += \
  $(TOP)/ext/sqlrr/sqlrr.h

# If using the amalgamation, use sqlite3.c directly to build the test
# fixture.  Otherwise link against libsqlite3.la.  (This distinction is
# necessary because the test fixture requires non-API symbols which are
# hidden when the library is built via the amalgamation).
#
TESTFIXTURE_SRC0 = $(TESTSRC2) libsqlite3.la
TESTFIXTURE_SRC1 = sqlite3.c
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)/src/tclsqlite.c $(TESTFIXTURE_SRC$(USE_AMALGAMATION))


# This is the default Makefile target.  The objects listed here
# are what get build when you type just "make" with no arguments.
#
all:	sqlite3.h libsqlite3.la sqlite3$(TEXE) $(HAVE_TCL:1=libtclsqlite3.la)

Makefile: $(TOP)/Makefile.in

# This target creates a directory named "tsrc" and fills it with
# copies of all of the C source code and header files needed to
# build on the target system.  Some of the C source code and header
# files are automatically generated.  This target takes care of
# all that automatic generation.
#
.target_source:	$(SRC) $(TOP)/tool/vdbe-compress.tcl
	rm -rf tsrc
	mkdir tsrc
	cp -f $(SRC) tsrc
	rm tsrc/sqlite.h.in tsrc/parse.y
	$(TCLSH_CMD) $(TOP)/tool/vdbe-compress.tcl <tsrc/vdbe.c >vdbe.new
	mv vdbe.new tsrc/vdbe.c
	touch .target_source

sqlite3.c:	.target_source $(TOP)/tool/mksqlite3c.tcl
	$(TCLSH_CMD) $(TOP)/tool/mksqlite3c.tcl

# Rule to build the amalgamation
#
sqlite3.lo:	sqlite3.c
	$(LTCOMPILE) $(TEMP_STORE) -c sqlite3.c

# Rules to build the LEMON compiler generator
#
lemon$(BEXE):	$(TOP)/tool/lemon.c $(TOP)/src/lempar.c
	$(BCC) -o $@ $(TOP)/tool/lemon.c
	cp $(TOP)/src/lempar.c .

# Rules to build individual *.o files from generated *.c files. This
# applies to:
#

#     parse.o
#     opcodes.o
#
parse.lo:	parse.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c parse.c

opcodes.lo:	opcodes.c
	$(LTCOMPILE) $(TEMP_STORE) -c opcodes.c

# Rules to build individual *.o files from files in the src directory.
#
alter.lo:	$(TOP)/src/alter.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/alter.c

analyze.lo:	$(TOP)/src/analyze.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/analyze.c

pcache.lo:	$(TOP)/src/pcache.c $(HDR) $(TOP)/src/pcache.h
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/pcache.c

pcache1.lo:	$(TOP)/src/pcache1.c $(HDR) $(TOP)/src/pcache.h
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/pcache1.c










os.lo:	$(TOP)/src/os.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/os.c

os_unix.lo:	$(TOP)/src/os_unix.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/os_unix.c

os_win.lo:	$(TOP)/src/os_win.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/os_win.c

os_os2.lo:	$(TOP)/src/os_os2.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/os_os2.c












pragma.lo:	$(TOP)/src/pragma.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/pragma.c

prepare.lo:	$(TOP)/src/prepare.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/prepare.c

printf.lo:	$(TOP)/src/printf.c $(HDR)

select.lo:	$(TOP)/src/select.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/select.c

status.lo:	$(TOP)/src/status.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/status.c




table.lo:	$(TOP)/src/table.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/table.c




tokenize.lo:	$(TOP)/src/tokenize.c keywordhash.h $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/tokenize.c





trigger.lo:	$(TOP)/src/trigger.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/trigger.c

update.lo:	$(TOP)/src/update.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/update.c

utf.lo:	$(TOP)/src/utf.c $(HDR)

vdbetrace.lo:	$(TOP)/src/vdbetrace.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbetrace.c

vtab.lo:	$(TOP)/src/vtab.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vtab.c

wal.lo:	$(TOP)/src/wal.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/wal.c

walker.lo:	$(TOP)/src/walker.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/walker.c

where.lo:	$(TOP)/src/where.c $(HDR)
	$(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/where.c

tclsqlite.lo:	$(TOP)/src/tclsqlite.c $(HDR)
	$(LTCOMPILE) -DUSE_TCL_STUBS=1 -c $(TOP)/src/tclsqlite.c

tclsqlite-shell.lo:	$(TOP)/src/tclsqlite.c $(HDR)
	$(LTCOMPILE) -DTCLSH=1 -o $@ -c $(TOP)/src/tclsqlite.c

tclsqlite-stubs.lo:	$(TOP)/src/tclsqlite.c $(HDR)
	$(LTCOMPILE) -DTCL_USE_STUBS=1 -o $@ -c $(TOP)/src/tclsqlite.c

tclsqlite3$(TEXE):	tclsqlite-shell.lo libsqlite3.la
	$(LTLINK) -o $@ tclsqlite-shell.lo \
		 libsqlite3.la $(LIBTCL)

# Rules to build opcodes.c and opcodes.h
#
opcodes.c:	opcodes.h $(TOP)/mkopcodec.awk
	sort -n -b -k 3 opcodes.h | $(NAWK) -f $(TOP)/mkopcodec.awk >opcodes.c

opcodes.h:	parse.h $(TOP)/src/vdbe.c $(TOP)/mkopcodeh.awk
	cat parse.h $(TOP)/src/vdbe.c | $(NAWK) -f $(TOP)/mkopcodeh.awk >opcodes.h

# Rules to build parse.c and parse.h - the outputs of lemon.
#
parse.h:	parse.c

parse.c:	$(TOP)/src/parse.y lemon$(BEXE) $(TOP)/addopcodes.awk
	cp $(TOP)/src/parse.y .
	rm -f parse.h
	./lemon$(BEXE) $(OPT_FEATURE_FLAGS) $(OPTS) parse.y
	mv parse.h parse.h.temp
	$(NAWK) -f $(TOP)/addopcodes.awk parse.h.temp >parse.h

sqlite3.h:	$(TOP)/src/sqlite.h.in $(TOP)/manifest.uuid $(TOP)/VERSION
	tclsh $(TOP)/tool/mksqlite3h.tcl $(TOP) >sqlite3.h

keywordhash.h:	$(TOP)/tool/mkkeywordhash.c
	$(BCC) -o mkkeywordhash$(BEXE) $(OPT_FEATURE_FLAGS) $(OPTS) $(TOP)/tool/mkkeywordhash.c
	./mkkeywordhash$(BEXE) >keywordhash.h



# Rules to build the extension objects.
#
icu.lo:	$(TOP)/ext/icu/icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/icu/icu.c

fts2.lo:	$(TOP)/ext/fts2/fts2.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2.c

fts2_hash.lo:	$(TOP)/ext/fts2/fts2_hash.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_hash.c

fts2_icu.lo:	$(TOP)/ext/fts2/fts2_icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_icu.c

fts2_porter.lo:	$(TOP)/ext/fts2/fts2_porter.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_porter.c

fts2_tokenizer.lo:	$(TOP)/ext/fts2/fts2_tokenizer.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_tokenizer.c

fts2_tokenizer1.lo:	$(TOP)/ext/fts2/fts2_tokenizer1.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_tokenizer1.c

fts3.lo:	$(TOP)/ext/fts3/fts3.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3.c

fts3_expr.lo:	$(TOP)/ext/fts3/fts3_expr.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_expr.c

fts3_hash.lo:	$(TOP)/ext/fts3/fts3_hash.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_hash.c

fts3_icu.lo:	$(TOP)/ext/fts3/fts3_icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_icu.c

fts3_snippet.lo:	$(TOP)/ext/fts3/fts3_snippet.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_snippet.c

fts3_porter.lo:	$(TOP)/ext/fts3/fts3_porter.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_porter.c

fts3_tokenizer.lo:	$(TOP)/ext/fts3/fts3_tokenizer.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenizer.c

fts3_tokenizer1.lo:	$(TOP)/ext/fts3/fts3_tokenizer1.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenizer1.c

fts3_write.lo:	$(TOP)/ext/fts3/fts3_write.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_write.c

rtree.lo:	$(TOP)/ext/rtree/rtree.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/rtree/rtree.c


# Rules to build the 'testfixture' application.
#
# If using the amalgamation, use sqlite3.c directly to build the test
# fixture.  Otherwise link against libsqlite3.la.  (This distinction is
# necessary because the test fixture requires non-API symbols which are
# hidden when the library is built via the amalgamation).
#
TESTFIXTURE_FLAGS  = -DTCLSH=1 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1
TESTFIXTURE_FLAGS += -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE 

TESTFIXTURE_SRC0 = $(TESTSRC2) libsqlite3.la
TESTFIXTURE_SRC1 = sqlite3.c
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)/src/tclsqlite.c $(TESTFIXTURE_SRC$(USE_AMALGAMATION))

testfixture$(TEXE):	$(TESTFIXTURE_SRC)
	$(LTLINK) -DSQLITE_NO_SYNC=1 $(TEMP_STORE) $(TESTFIXTURE_FLAGS) \


		-o $@ $(TESTFIXTURE_SRC) $(LIBTCL) $(TLIBS)


fulltest:	testfixture$(TEXE) sqlite3$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/all.test

soaktest:	testfixture$(TEXE) sqlite3$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/all.test -soak=1

test:	testfixture$(TEXE) sqlite3$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/veryquick.test

sqlite3_analyzer$(TEXE):	$(TESTFIXTURE_SRC) $(TOP)/tool/spaceanal.tcl
	sed \
	  -e '/^#/d' \
	  -e 's,\\,\\\\,g' \
	  -e 's,",\\",g' \
	  -e 's,^,",' \
	  -e 's,$$,\\n",' \
	  $(TOP)/tool/spaceanal.tcl >spaceanal_tcl.h
	$(LTLINK) -DTCLSH=2 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1 \
		-DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE \
		$(TEMP_STORE) -o $@ $(TESTFIXTURE_SRC) $(LIBTCL) $(TLIBS)


# Standard install and cleanup targets
#
lib_install:	libsqlite3.la
	$(INSTALL) -d $(DESTDIR)$(libdir)
	$(LTINSTALL) libsqlite3.la $(DESTDIR)$(libdir)
	
install:	sqlite3$(BEXE) lib_install sqlite3.h sqlite3.pc ${HAVE_TCL:1=tcl_install}
	$(INSTALL) -d $(DESTDIR)$(bindir)
	$(LTINSTALL) sqlite3$(BEXE) $(DESTDIR)$(bindir)

	$(LTINSTALL) libtclsqlite3.la $(DESTDIR)$(TCLLIBDIR)
	rm -f $(DESTDIR)$(TCLLIBDIR)/libtclsqlite3.la $(DESTDIR)$(TCLLIBDIR)/libtclsqlite3.a
	$(INSTALL) -m 0644 pkgIndex.tcl $(DESTDIR)$(TCLLIBDIR)

clean:	
	rm -f *.lo *.la *.o sqlite3$(TEXE) libsqlite3.la
	rm -f sqlite3.h opcodes.*
	rm -rf .libs .deps
	rm -f lemon$(BEXE) lempar.c parse.* sqlite*.tar.gz
	rm -f mkkeywordhash$(BEXE) keywordhash.h
	rm -f $(PUBLISH)
	rm -f *.da *.bb *.bbg gmon.out
	rm -rf tsrc .target_source
	rm -f testfixture$(TEXE) test.db

	rm -f sqlite3.dll sqlite3.lib sqlite3.def
	rm -f sqlite3.c

distclean:	clean
	rm -f config.log config.status libtool Makefile sqlite3.pc

#
# Windows section
#

  $(TOP)/src/test_onefile.c \
  $(TOP)/src/test_osinst.c \
  $(TOP)/src/test_pcache.c \
  $(TOP)/src/test_schema.c \
  $(TOP)/src/test_server.c \
  $(TOP)/src/test_tclvar.c \
  $(TOP)/src/test_thread.c \
  $(TOP)/src/test_vfs.c \
  $(TOP)/src/test_wsd.c \

#TESTSRC += $(TOP)/ext/fts2/fts2_tokenizer.c
#TESTSRC += $(TOP)/ext/fts3/fts3_tokenizer.c

TESTSRC2 = \
  $(TOP)/src/attach.c $(TOP)/src/backup.c $(TOP)/src/btree.c                   \

		$(TESTSRC) $(TOP)/src/tclsqlite.c sqlite3.c fts3amal.c       \
		-o testfixture$(EXE) $(LIBTCL) $(THREADLIB)

fulltest:	testfixture$(EXE) sqlite3$(EXE)
	./testfixture$(EXE) $(TOP)/test/all.test

soaktest:	testfixture$(EXE) sqlite3$(EXE)
	./testfixture$(EXE) $(TOP)/test/all.test -soak=1

test:	testfixture$(EXE) sqlite3$(EXE)
	./testfixture$(EXE) $(TOP)/test/veryquick.test

sqlite3_analyzer$(EXE):	$(TOP)/src/tclsqlite.c sqlite3.c $(TESTSRC) \
			$(TOP)/tool/spaceanal.tcl
	sed \

3.7.0.1

#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.62 for sqlite 3.7.0.1.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization.  ##

MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}

# Identity of this package.
PACKAGE_NAME='sqlite'
PACKAGE_TARNAME='sqlite'
PACKAGE_VERSION='3.7.0.1'
PACKAGE_STRING='sqlite 3.7.0.1'
PACKAGE_BUGREPORT=''

# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>

#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<_ACEOF
\`configure' configures sqlite 3.7.0.1 to adapt to many kinds of systems.

Usage: $0 [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
_ACEOF
fi

if test -n "$ac_init_help"; then
  case $ac_init_help in
     short | recursive ) echo "Configuration of sqlite 3.7.0.1:";;
   esac
  cat <<\_ACEOF

Optional Features:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]

    cd "$ac_pwd" || { ac_status=$?; break; }
  done
fi

test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
  cat <<\_ACEOF
sqlite configure 3.7.0.1
generated by GNU Autoconf 2.62

Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
  exit
fi
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by sqlite $as_me 3.7.0.1, which was
generated by GNU Autoconf 2.62.  Invocation command line was

  $ $0 $@

_ACEOF
exec 5>>config.log
{

exec 6>&1

# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by sqlite $as_me 3.7.0.1, which was
generated by GNU Autoconf 2.62.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

$config_commands

Report bugs to <bug-autoconf@gnu.org>."

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
sqlite config.status 3.7.0.1
configured by $0, generated by GNU Autoconf 2.62,
  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"

Copyright (C) 2008 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

 *** Throughout this document, a page is deemed to have been synced
     automatically as soon as it is written when PRAGMA synchronous=OFF.
     Otherwise, the page is not synced until the xSync method of the VFS
     is called successfully on the file containing the page.

 *** Definition:  A page of the database file is said to be "overwriteable" if
     one or more of the following are true about the page:
 
     (a)  The original content of the page as it was at the beginning of
          the transaction has been written into the rollback journal and
          synced.
 
     (b)  The page was a freelist leaf page at the start of the transaction.
 
     (c)  The page number is greater than the largest page that existed in
          the database file at the start of the transaction.
 
 (1) A page of the database file is never overwritten unless one of the
     following are true:
 
     (a) The page and all other pages on the same sector are overwriteable.
 
     (b) The atomic page write optimization is enabled, and the entire
         transaction other than the update of the transaction sequence
         number consists of a single page change.
 
 (2) The content of a page written into the rollback journal exactly matches
     both the content in the database when the rollback journal was written
     and the content in the database at the beginning of the current
     transaction.
 
 (3) Writes to the database file are an integer multiple of the page size
     in length and are aligned to a page boundary.
 
 (4) Reads from the database file are either aligned on a page boundary and
     an integer multiple of the page size in length or are taken from the
     first 100 bytes of the database file.
 
 (5) All writes to the database file are synced prior to the rollback journal
     being deleted, truncated, or zeroed.
 
 (6) If a master journal file is used, then all writes to the database file
     are synced prior to the master journal being deleted.
 
 *** Definition: Two databases (or the same database at two points it time)
     are said to be "logically equivalent" if they give the same answer to
     all queries.  Note in particular the the content of freelist leaf
     pages can be changed arbitarily without effecting the logical equivalence
     of the database.
 
 (7) At any time, if any subset, including the empty set and the total set,
     of the unsynced changes to a rollback journal are removed and the 
     journal is rolled back, the resulting database file will be logical
     equivalent to the database file at the beginning of the transaction.
 
 (8) When a transaction is rolled back, the xTruncate method of the VFS
     is called to restore the database file to the same size it was at
     the beginning of the transaction.  (In some VFSes, the xTruncate
     method is a no-op, but that does not change the fact the SQLite will
     invoke it.)
 
 (9) Whenever the database file is modified, at least one bit in the range
     of bytes from 24 through 39 inclusive will be changed prior to releasing
     the EXCLUSIVE lock.

(10) The pattern of bits in bytes 24 through 39 shall not repeat in less
     than one billion transactions.

(11) A database file is well-formed at the beginning and at the conclusion
     of every transaction.

(12) An EXCLUSIVE lock must be held on the database file before making
     any changes to the database file.

(13) A SHARED lock must be held on the database file before reading any
     content out of the database file.

The 5 states of an historical rollback lock as implemented by the
xLock, xUnlock, and xCheckReservedLock methods of the sqlite3_io_methods
objec are:

   UNLOCKED
   SHARED
   RESERVED
   PENDING
   EXCLUSIVE

The wal-index file has a similar locking hierarchy implemented using
the xShmLock method of the sqlite3_vfs object, but with 7
states.  Each connection to a wal-index file must be in one of
the following 7 states:

   UNLOCKED
   READ
   READ_FULL
   WRITE
   PENDING
   CHECKPOINT
   RECOVER

These roughly correspond to the 5 states of a rollback lock except
that SHARED is split out into 2 states: READ and READ_FULL and
there is an extra RECOVER state used for wal-index reconstruction.

The meanings of the various wal-index locking states is as follows:

   UNLOCKED    - The wal-index is not in use.

   READ        - Some prefix of the wal-index is being read. Additional
                 wal-index information can be appended at any time.  The
                 newly appended content will be ignored by the holder of
                 the READ lock.

   READ_FULL   - The entire wal-index is being read.  No new information
                 can be added to the wal-index.  The holder of a READ_FULL
                 lock promises never to read pages from the database file
                 that are available anywhere in the wal-index.

   WRITE       - It is OK to append to the wal-index file and to adjust
                 the header to indicate the new "last valid frame".

   PENDING     - Waiting on all READ locks to clear so that a
                 CHECKPOINT lock can be acquired.

   CHECKPOINT  - It is OK to write any WAL data into the database file
                 and zero the last valid frame field of the wal-index
                 header.  The wal-index file itself may not be changed
                 other than to zero the last valid frame field in the
                 header.

   RECOVER     - Held during wal-index recovery.  Used to prevent a
                 race if multiple clients try to recover a wal-index at
                 the same time.
   

A particular lock manager implementation may coalesce one or more of 
the wal-index locking states, though with a reduction in concurrency.
For example, an implemention might implement only exclusive locking,
in which case all states would be equivalent to CHECKPOINT, meaning that 
only one reader or one writer or one checkpointer could be active at a 
time.  Or, an implementation might combine READ and READ_FULL into 
a single state equivalent to READ, meaning that a writer could
coexist with a reader, but no reader or writers could coexist with a
checkpointer.

The lock manager must obey the following rules:

(1)  A READ cannot coexist with CHECKPOINT.
(2)  A READ_FULL cannot coexist with WRITE.
(3)  None of WRITE, PENDING, CHECKPOINT, or RECOVER can coexist.

The SQLite core will obey the next set of rules.  These rules are
assertions on the behavior of the SQLite core which might be verified
during testing using an instrumented lock manager.

(5)  No part of the wal-index will be read without holding either some
     kind of SHM lock or an EXCLUSIVE lock on the original database.
     The original database is the file named in the 2nd parameter to
     the xShmOpen method.

(6)  A holder of a READ_FULL will never read any page of the database
     file that is contained anywhere in the wal-index.

(7)  No part of the wal-index other than the header will be written nor
     will the size of the wal-index grow without holding a WRITE or
     an EXCLUSIVE on the original database file.

(8)  The wal-index header will not be written without holding one of
     WRITE, CHECKPOINT, or RECOVER on the wal-index or an EXCLUSIVE on
     the original database files.

(9)  A CHECKPOINT or RECOVER must be held on the wal-index, or an
     EXCLUSIVE on the original database file, in order to reset the 
     last valid frame counter in the header of the wal-index back to zero.

(10) A WRITE can only increase the last valid frame pointer in the header.

The SQLite core will only ever send requests for UNLOCK, READ, WRITE,
CHECKPOINT, or RECOVER to the lock manager.   The SQLite core will never
request a READ_FULL or PENDING lock though the lock manager may deliver
those locking states in response to READ and CHECKPOINT requests,
respectively, if and only if the requested READ or CHECKPOINT cannot
be delivered.

The following are the allowed lock transitions:

       Original-State     Request         New-State
       --------------     ----------      ----------
(11a)  UNLOCK             READ            READ
(11b)  UNLOCK             READ            READ_FULL
(11c)  UNLOCK             CHECKPOINT      PENDING
(11d)  UNLOCK             CHECKPOINT      CHECKPOINT
(11e)  READ               UNLOCK          UNLOCK
(11f)  READ               WRITE           WRITE
(11g)  READ               RECOVER         RECOVER
(11h)  READ_FULL          UNLOCK          UNLOCK
(11i)  READ_FULL          WRITE           WRITE
(11j)  READ_FULL          RECOVER         RECOVER
(11k)  WRITE              READ            READ
(11l)  PENDING            UNLOCK          UNLOCK
(11m)  PENDING            CHECKPOINT      CHECKPOINT
(11n)  CHECKPOINT         UNLOCK          UNLOCK
(11o)  RECOVER            READ            READ

These 15 transitions are all that needs to be supported.  The lock
manager implementation can assert that fact.  The other 27 possible
transitions among the 7 locking states will never occur.

  sqlite3_file *pFile, 
  void *zOut, 
  int iAmt, 
  sqlite3_int64 iOffset
){
  AsyncFileData *p = ((AsyncFile *)pFile)->pData;
  int rc = SQLITE_OK;
  sqlite3_int64 filesize = 0;
  sqlite3_file *pBase = p->pBaseRead;
  sqlite3_int64 iAmt64 = (sqlite3_int64)iAmt;

  /* Grab the write queue mutex for the duration of the call */
  async_mutex_enter(ASYNC_MUTEX_QUEUE);

  /* If an I/O error has previously occurred in this virtual file 

    sqlite3_int64 nRead;
    rc = pBase->pMethods->xFileSize(pBase, &filesize);
    if( rc!=SQLITE_OK ){
      goto asyncread_out;
    }
    nRead = MIN(filesize - iOffset, iAmt64);
    if( nRead>0 ){
      rc = pBase->pMethods->xRead(pBase, zOut, (int)nRead, iOffset);
      ASYNC_TRACE(("READ %s %d bytes at %d\n", p->zName, nRead, iOffset));
    }
  }

  if( rc==SQLITE_OK ){
    AsyncWrite *pWrite;
    char *zName = p->zName;

        ** these offsets is a negative number, set them to 0.
        */
        sqlite3_int64 iBeginOut = (pWrite->iOffset-iOffset);
        sqlite3_int64 iBeginIn = -iBeginOut;
        if( iBeginIn<0 ) iBeginIn = 0;
        if( iBeginOut<0 ) iBeginOut = 0;

        filesize = MAX(filesize, pWrite->iOffset+nByte64);

        nCopy = MIN(nByte64-iBeginIn, iAmt64-iBeginOut);
        if( nCopy>0 ){
          memcpy(&((char *)zOut)[iBeginOut], &pWrite->zBuf[iBeginIn], (size_t)nCopy);
          ASYNC_TRACE(("OVERREAD %d bytes at %d\n", nCopy, iBeginOut+iOffset));
        }
      }
    }
  }

asyncread_out:
  async_mutex_leave(ASYNC_MUTEX_QUEUE);
  if( rc==SQLITE_OK && filesize<(iOffset+iAmt) ){
    rc = SQLITE_IOERR_SHORT_READ;
  }
  return rc;
}

/*
** Truncate the file to nByte bytes in length. This just adds an entry to 
** the write-op list, no IO actually takes place.
*/

    }
    sqlite3_free(pData);
  }

  async_mutex_leave(ASYNC_MUTEX_LOCK);

  if( rc==SQLITE_OK ){

    pData->pLock = pLock;
  }

  if( rc==SQLITE_OK && isAsyncOpen ){
    rc = addNewAsyncWrite(pData, ASYNC_OPENEXCLUSIVE, (sqlite3_int64)flags,0,0);
    if( rc==SQLITE_OK ){
      if( pOutFlags ) *pOutFlags = flags;
    }else{
      async_mutex_enter(ASYNC_MUTEX_LOCK);
      unlinkAsyncFile(pData);
      async_mutex_leave(ASYNC_MUTEX_LOCK);
      sqlite3_free(pData);
    }
  }
  if( rc!=SQLITE_OK ){
    p->pMethod = 0;
  }else{
    incrOpenFileCount();
  }

  return rc;
}

/*
** Implementation of sqlite3OsDelete. Add an entry to the end of the 
** write-op queue to perform the delete.
*/

  /* Because of the way intra-process file locking works, this backend
  ** needs to return a canonical path. The following block assumes the
  ** file-system uses unix style paths. 
  */
  if( rc==SQLITE_OK ){
    int i, j;
    char *z = zPathOut;
    int n = (int)strlen(z);
    while( n>1 && z[n-1]=='/' ){ n--; }
    for(i=j=0; i<n; i++){
      if( z[i]=='/' ){
        if( z[i+1]=='/' ) continue;
        if( z[i+1]=='.' && i+2<n && z[i+2]=='/' ){
          i += 1;
          continue;

** 14 bits - BA
** 21 bits - BBA
** and so on.
**
** This is similar in concept to how sqlite encodes "varints" but
** the encoding is not the same.  SQLite varints are big-endian
** are are limited to 9 bytes in length whereas FTS3 varints are
** little-endian and can be up to 10 bytes in length (in theory).
**
** Example encodings:
**
**     1:    0x01
**   127:    0x7f
**   128:    0x81 0x00
**
**
**** Document lists ****
** A doclist (document list) holds a docid-sorted list of hits for a
** given term.  Doclists hold docids and associated token positions.
** A docid is the unique integer identifier for a single document.
** A position is the index of a word within the document.  The first 
** word of the document has a position of 0.
**
** FTS3 used to optionally store character offsets using a compile-time
** option.  But that functionality is no longer supported.
**
** A doclist is stored like this:
**
** array {
**   varint docid;
**   array {                (position list for column 0)
**     varint position;     (2 more than the delta from previous position)
**   }
**   array {
**     varint POS_COLUMN;   (marks start of position list for new column)
**     varint column;       (index of new column)
**     array {
**       varint position;   (2 more than the delta from previous position)
**     }
**   }
**   varint POS_END;        (marks end of positions for this document.
** }
**
** Here, array { X } means zero or more occurrences of X, adjacent in
** memory.  A "position" is an index of a token in the token stream
** generated by the tokenizer. Note that POS_END and POS_COLUMN occur 
** in the same logical place as the position element, and act as sentinals
** ending a position list array.  POS_END is 0.  POS_COLUMN is 1.
** The positions numbers are not stored literally but rather as two more
** than the difference from the prior position, or the just the position plus
** 2 for the first position.  Example:
**
**   label:       A B C D E  F  G H   I  J K
**   value:     123 5 9 1 1 14 35 0 234 72 0
**
** The 123 value is the first docid.  For column zero in this document
** there are two matches at positions 3 and 10 (5-2 and 9-2+3).  The 1
** at D signals the start of a new column; the 1 at E indicates that the
** new column is column number 1.  There are two positions at 12 and 45
** (14-2 and 35-2+12).  The 0 at H indicate the end-of-document.  The
** 234 at I is the next docid.  It has one position 72 (72-2) and then
** terminates with the 0 at K.
**
** A "position-list" is the list of positions for multiple columns for
** a single docid.  A "column-list" is the set of positions for a single
** column.  Hence, a position-list consists of one or more column-lists,
** a document record consists of a docid followed by a position-list and
** a doclist consists of one or more document records.
**


** A bare doclist omits the position information, becoming an 
** array of varint-encoded docids.
**
**** Segment leaf nodes ****
** Segment leaf nodes store terms and doclists, ordered by term.  Leaf
** nodes are written using LeafWriter, and read using LeafReader (to
** iterate through a single leaf node's data) and LeavesReader (to
** iterate through a segment's entire leaf layer).  Leaf nodes have
** the format:

 sqlite_int64 i;
 int ret = sqlite3Fts3GetVarint(p, &i);
 *pi = (int) i;
 return ret;
}

/*
** Return the number of bytes required to encode v as a varint

*/
int sqlite3Fts3VarintLen(sqlite3_uint64 v){
  int i = 0;
  do{
    i++;
    v >>= 7;
  }while( v!=0 );

    }
    z[iOut] = '\0';
  }
}

/*
** Read a single varint from the doclist at *pp and advance *pp to point
** to the first byte past the end of the varint.  Add the value of the varint
** to *pVal.
*/
static void fts3GetDeltaVarint(char **pp, sqlite3_int64 *pVal){
  sqlite3_int64 iVal;
  *pp += sqlite3Fts3GetVarint(*pp, &iVal);
  *pVal += iVal;
}

/*
** Construct one or more SQL statements from the format string given
** and then evaluate those statements.  The success code is writting
** into *pRc.
**
** If *pRc is initially non-zero then this routine is a no-op.
*/
static void fts3DbExec(
  int *pRc,              /* Success code */
  sqlite3 *db,           /* Database in which to run SQL */
  const char *zFormat,   /* Format string for SQL */
  ...                    /* Arguments to the format string */
){
  va_list ap;
  char *zSql;

  return rc;
}

/*
** Create the backing store tables (%_content, %_segments and %_segdir)
** required by the FTS3 table passed as the only argument. This is done
** as part of the vtab xCreate() method.
**
** If the p->bHasDocsize boolean is true (indicating that this is an
** FTS4 table, not an FTS3 table) then also create the %_docsize and
** %_stat tables required by FTS4.
*/
static int fts3CreateTables(Fts3Table *p){
  int rc = SQLITE_OK;             /* Return code */
  int i;                          /* Iterator variable */
  char *zContentCols;             /* Columns of %_content table */
  sqlite3 *db = p->db;            /* The database connection */

  return rc;
}

/*
** An sqlite3_exec() callback for fts3TableExists.
*/
static int fts3TableExistsCallback(void *pArg, int n, char **pp1, char **pp2){
  UNUSED_PARAMETER(n);
  UNUSED_PARAMETER(pp1);
  UNUSED_PARAMETER(pp2);
  *(int*)pArg = 1;
  return 1;
}

/*
** Determine if a table currently exists in the database.
*/

  if( *pRc ) return;
  zSql = sqlite3_mprintf(
    "SELECT 1 FROM %Q.sqlite_master WHERE name='%q%s'",
    zDb, zName, zSuffix
  );    
  rc = sqlite3_exec(db, zSql, fts3TableExistsCallback, &res, 0);
  sqlite3_free(zSql);
  *pResult = (u8)(res & 0xff);
  if( rc!=SQLITE_ABORT ) *pRc = rc;
}

/*
** This function is the implementation of both the xConnect and xCreate
** methods of the FTS3 virtual table.
**
** The argv[] array contains the following:
**
**   argv[0]   -> module name  ("fts3" or "fts4")
**   argv[1]   -> database name
**   argv[2]   -> table name
**   argv[...] -> "column name" and other module argument fields.
*/
static int fts3InitVtab(
  int isCreate,                   /* True for xCreate, false for xConnect */
  sqlite3 *db,                    /* The SQLite database connection */
  void *pAux,                     /* Hash table containing tokenizers */
  int argc,                       /* Number of elements in argv array */
  const char * const *argv,       /* xCreate/xConnect argument array */
  sqlite3_vtab **ppVTab,          /* Write the resulting vtab structure here */
  char **pzErr                    /* Write any error message here */
){
  Fts3Hash *pHash = (Fts3Hash *)pAux;
  Fts3Table *p;                   /* Pointer to allocated vtab */
  int rc;                         /* Return code */
  int i;                          /* Iterator variable */
  int nByte;                      /* Size of allocation used for *p */
  int iCol;                       /* Column index */
  int nString = 0;                /* Bytes required to hold all column names */
  int nCol = 0;                   /* Number of columns in the FTS table */
  char *zCsr;                     /* Space for holding column names */
  int nDb;                        /* Bytes required to hold database name */
  int nName;                      /* Bytes required to hold table name */

  const char *zTokenizer = 0;               /* Name of tokenizer to use */
  sqlite3_tokenizer *pTokenizer = 0;        /* Tokenizer for this table */

  nDb = (int)strlen(argv[1]) + 1;
  nName = (int)strlen(argv[2]) + 1;
  for(i=3; i<argc; i++){

  sqlite3Fts3ExprFree(pCsr->pExpr);
  sqlite3_free(pCsr->aDoclist);
  sqlite3_free(pCsr->aMatchinfo);
  sqlite3_free(pCsr);
  return SQLITE_OK;
}

/*
** Position the pCsr->pStmt statement so that it is on the row
** of the %_content table that contains the last match.  Return
** SQLITE_OK on success.  
*/
static int fts3CursorSeek(sqlite3_context *pContext, Fts3Cursor *pCsr){
  if( pCsr->isRequireSeek ){
    pCsr->isRequireSeek = 0;
    sqlite3_bind_int64(pCsr->pStmt, 1, pCsr->iPrevId);
    if( SQLITE_ROW==sqlite3_step(pCsr->pStmt) ){
      return SQLITE_OK;
    }else{

      return rc;
    }
  }else{
    return SQLITE_OK;
  }
}

/*
** Advance the cursor to the next row in the %_content table that
** matches the search criteria.  For a MATCH search, this will be
** the next row that matches.  For a full-table scan, this will be
** simply the next row in the %_content table.  For a docid lookup,
** this routine simply sets the EOF flag.
**
** Return SQLITE_OK if nothing goes wrong.  SQLITE_OK is returned
** even if we reach end-of-file.  The fts3EofMethod() will be called
** subsequently to determine whether or not an EOF was hit.
*/
static int fts3NextMethod(sqlite3_vtab_cursor *pCursor){
  int rc = SQLITE_OK;             /* Return code */
  Fts3Cursor *pCsr = (Fts3Cursor *)pCursor;

  if( pCsr->aDoclist==0 ){
    if( SQLITE_ROW!=sqlite3_step(pCsr->pStmt) ){
      pCsr->isEof = 1;

  *piPrev = iVal;
}

/*
** When this function is called, *ppPoslist is assumed to point to the 
** start of a position-list. After it returns, *ppPoslist points to the
** first byte after the position-list.
**
** A position list is list of positions (delta encoded) and columns for 
** a single document record of a doclist.  So, in other words, this
** routine advances *ppPoslist so that it points to the next docid in
** the doclist, or to the first byte past the end of the doclist.
**
** If pp is not NULL, then the contents of the position list are copied
** to *pp. *pp is set to point to the first byte past the last byte copied
** before this function returns.
*/
static void fts3PoslistCopy(char **pp, char **ppPoslist){
  char *pEnd = *ppPoslist;
  char c = 0;

  /* The end of a position list is marked by a zero encoded as an FTS3 
  ** varint. A single POS_END (0) byte. Except, if the 0 byte is preceded by
  ** a byte with the 0x80 bit set, then it is not a varint 0, but the tail
  ** of some other, multi-byte, value.
  **
  ** The following while-loop moves pEnd to point to the first byte that is not 
  ** immediately preceded by a byte with the 0x80 bit set. Then increments
  ** pEnd once more so that it points to the byte immediately following the
  ** last byte in the position-list.
  */
  while( *pEnd | c ){
    c = *pEnd++ & 0x80;
    testcase( c!=0 && (*pEnd)==0 );
  }
  pEnd++;  /* Advance past the POS_END terminator byte */

  if( pp ){
    int n = (int)(pEnd - *ppPoslist);
    char *p = *pp;
    memcpy(p, *ppPoslist, n);
    p += n;
    *pp = p;
  }
  *ppPoslist = pEnd;
}

/*
** When this function is called, *ppPoslist is assumed to point to the 
** start of a column-list. After it returns, *ppPoslist points to the
** to the terminator (POS_COLUMN or POS_END) byte of the column-list.
**
** A column-list is list of delta-encoded positions for a single column
** within a single document within a doclist.
**
** The column-list is terminated either by a POS_COLUMN varint (1) or
** a POS_END varint (0).  This routine leaves *ppPoslist pointing to
** the POS_COLUMN or POS_END that terminates the column-list.
**
** If pp is not NULL, then the contents of the column-list are copied
** to *pp. *pp is set to point to the first byte past the last byte copied
** before this function returns.  The POS_COLUMN or POS_END terminator
** is not copied into *pp.
*/
static void fts3ColumnlistCopy(char **pp, char **ppPoslist){
  char *pEnd = *ppPoslist;
  char c = 0;

  /* A column-list is terminated by either a 0x01 or 0x00 byte that is
  ** not part of a multi-byte varint.
  */
  while( 0xFE & (*pEnd | c) ){
    c = *pEnd++ & 0x80;
    testcase( c!=0 && ((*pEnd)&0xfe)==0 );
  }
  if( pp ){
    int n = (int)(pEnd - *ppPoslist);
    char *p = *pp;
    memcpy(p, *ppPoslist, n);
    p += n;
    *pp = p;
  }
  *ppPoslist = pEnd;
}

/*
** Value used to signify the end of an position-list. This is safe because
** it is not possible to have a document with 2^31 terms.
*/
#define POSITION_LIST_END 0x7fffffff

/*
** This function is used to help parse position-lists. When this function is
** called, *pp may point to the start of the next varint in the position-list
** being parsed, or it may point to 1 byte past the end of the position-list
** (in which case **pp will be a terminator bytes POS_END (0) or
** (1)).
**
** If *pp points past the end of the current position-list, set *pi to 
** POSITION_LIST_END and return. Otherwise, read the next varint from *pp,
** increment the current value of *pi by the value read, and set *pp to
** point to the next value before returning.
**
** Before calling this routine *pi must be initialized to the value of
** the previous position, or zero if we are reading the first position
** in the position-list.  Because positions are delta-encoded, the value
** of the previous position is needed in order to compute the value of
** the next position.
*/
static void fts3ReadNextPos(
  char **pp,                    /* IN/OUT: Pointer into position-list buffer */
  sqlite3_int64 *pi             /* IN/OUT: Value read from position-list */
){
  if( (**pp)&0xFE ){
    fts3GetDeltaVarint(pp, pi);
    *pi -= 2;
  }else{
    *pi = POSITION_LIST_END;
  }
}

/*
** If parameter iCol is not 0, write an POS_COLUMN (1) byte followed by
** the value of iCol encoded as a varint to *pp.   This will start a new
** column list.
**
** Set *pp to point to the byte just after the last byte written before 
** returning (do not modify it if iCol==0). Return the total number of bytes
** written (0 if iCol==0).
*/
static int fts3PutColNumber(char **pp, int iCol){
  int n = 0;                      /* Number of bytes written */
  if( iCol ){
    char *p = *pp;                /* Output pointer */
    n = 1 + sqlite3Fts3PutVarint(&p[1], iCol);
    *p = 0x01;
    *pp = &p[n];
  }
  return n;
}

/*
** Compute the union of two position lists.  The output written
** into *pp contains all positions of both *pp1 and *pp2 in sorted
** order and with any duplicates removed.  All pointers are
** updated appropriately.   The caller is responsible for insuring
** that there is enough space in *pp to hold the complete output.
*/
static void fts3PoslistMerge(
  char **pp,                      /* Output buffer */
  char **pp1,                     /* Left input list */
  char **pp2                      /* Right input list */
){
  char *p = *pp;
  char *p1 = *pp1;
  char *p2 = *pp2;

  while( *p1 || *p2 ){
    int iCol1;         /* The current column index in pp1 */
    int iCol2;         /* The current column index in pp2 */

    if( *p1==POS_COLUMN ) sqlite3Fts3GetVarint32(&p1[1], &iCol1);
    else if( *p1==POS_END ) iCol1 = POSITION_LIST_END;
    else iCol1 = 0;

    if( *p2==POS_COLUMN ) sqlite3Fts3GetVarint32(&p2[1], &iCol2);
    else if( *p2==POS_END ) iCol2 = POSITION_LIST_END;
    else iCol2 = 0;

    if( iCol1==iCol2 ){
      sqlite3_int64 i1 = 0;       /* Last position from pp1 */
      sqlite3_int64 i2 = 0;       /* Last position from pp2 */
      sqlite3_int64 iPrev = 0;
      int n = fts3PutColNumber(&p, iCol1);
      p1 += n;
      p2 += n;

      /* At this point, both p1 and p2 point to the start of column-lists
      ** for the same column (the column with index iCol1 and iCol2).
      ** A column-list is a list of non-negative delta-encoded varints, each 
      ** incremented by 2 before being stored. Each list is terminated by a
      ** POS_END (0) or POS_COLUMN (1). The following block merges the two lists
      ** and writes the results to buffer p. p is left pointing to the byte
      ** after the list written. No terminator (POS_END or POS_COLUMN) is
      ** written to the output.
      */
      fts3GetDeltaVarint(&p1, &i1);
      fts3GetDeltaVarint(&p2, &i2);
      do {
        fts3PutDeltaVarint(&p, &iPrev, (i1<i2) ? i1 : i2); 
        iPrev -= 2;
        if( i1==i2 ){
          fts3ReadNextPos(&p1, &i1);
          fts3ReadNextPos(&p2, &i2);
        }else if( i1<i2 ){
          fts3ReadNextPos(&p1, &i1);
        }else{
          fts3ReadNextPos(&p2, &i2);
        }
      }while( i1!=POSITION_LIST_END || i2!=POSITION_LIST_END );
    }else if( iCol1<iCol2 ){
      p1 += fts3PutColNumber(&p, iCol1);
      fts3ColumnlistCopy(&p, &p1);
    }else{
      p2 += fts3PutColNumber(&p, iCol2);
      fts3ColumnlistCopy(&p, &p2);
    }
  }

  *p++ = POS_END;
  *pp = p;
  *pp1 = p1 + 1;
  *pp2 = p2 + 1;
}

/*
** nToken==1 searches for adjacent positions.

  char *p = (pp ? *pp : 0);
  char *p1 = *pp1;
  char *p2 = *pp2;

  int iCol1 = 0;
  int iCol2 = 0;
  assert( *p1!=0 && *p2!=0 );
  if( *p1==POS_COLUMN ){ 
    p1++;
    p1 += sqlite3Fts3GetVarint32(p1, &iCol1);
  }
  if( *p2==POS_COLUMN ){ 
    p2++;
    p2 += sqlite3Fts3GetVarint32(p2, &iCol2);
  }

  while( 1 ){
    if( iCol1==iCol2 ){
      char *pSave = p;
      sqlite3_int64 iPrev = 0;
      sqlite3_int64 iPos1 = 0;
      sqlite3_int64 iPos2 = 0;

      if( pp && iCol1 ){
        *p++ = POS_COLUMN;
        p += sqlite3Fts3PutVarint(p, iCol1);
      }

      assert( *p1!=POS_END && *p1!=POS_COLUMN );
      assert( *p2!=POS_END && *p2!=POS_COLUMN );
      fts3GetDeltaVarint(&p1, &iPos1); iPos1 -= 2;
      fts3GetDeltaVarint(&p2, &iPos2); iPos2 -= 2;

      while( 1 ){
        if( iPos2>iPos1 && iPos2<=iPos1+nToken ){
          sqlite3_int64 iSave;
          if( !pp ){

      }
      break;
    }

    default: assert( mergetype==MERGE_POS_NEAR || mergetype==MERGE_NEAR ); {
      char *aTmp = 0;
      char **ppPos = 0;

      if( mergetype==MERGE_POS_NEAR ){
        ppPos = &p;
        aTmp = sqlite3_malloc(2*(n1+n2+1));
        if( !aTmp ){
          return SQLITE_NOMEM;
        }
      }

/* 
** A pointer to an instance of this structure is used as the context 
** argument to sqlite3Fts3SegReaderIterate()
*/
typedef struct TermSelect TermSelect;
struct TermSelect {
  int isReqPos;
  char *aaOutput[16];             /* Malloc'd output buffer */
  int anOutput[16];               /* Size of output in bytes */
};

/*
** Merge all doclists in the TermSelect.aaOutput[] array into a single
** doclist stored in TermSelect.aaOutput[0]. If successful, delete all
** other doclists (except the aaOutput[0] one) and return SQLITE_OK.
**
** If an OOM error occurs, return SQLITE_NOMEM. In this case it is
** the responsibility of the caller to free any doclists left in the
** TermSelect.aaOutput[] array.
*/
static int fts3TermSelectMerge(TermSelect *pTS){
  int mergetype = (pTS->isReqPos ? MERGE_POS_OR : MERGE_OR);
  char *aOut = 0;
  int nOut = 0;
  int i;

  /* Loop through the doclists in the aaOutput[] array. Merge them all
  ** into a single doclist.
  */
  for(i=0; i<SizeofArray(pTS->aaOutput); i++){
    if( pTS->aaOutput[i] ){
      if( !aOut ){
        aOut = pTS->aaOutput[i];
        nOut = pTS->anOutput[i];
        pTS->aaOutput[0] = 0;
      }else{
        int nNew = nOut + pTS->anOutput[i];
        char *aNew = sqlite3_malloc(nNew);
        if( !aNew ){
          sqlite3_free(aOut);
          return SQLITE_NOMEM;
        }
        fts3DoclistMerge(mergetype, 0, 0,
            aNew, &nNew, pTS->aaOutput[i], pTS->anOutput[i], aOut, nOut
        );
        sqlite3_free(pTS->aaOutput[i]);
        sqlite3_free(aOut);
        pTS->aaOutput[i] = 0;
        aOut = aNew;
        nOut = nNew;
      }
    }
  }

  pTS->aaOutput[0] = aOut;
  pTS->anOutput[0] = nOut;
  return SQLITE_OK;
}

/*
** This function is used as the sqlite3Fts3SegReaderIterate() callback when
** querying the full-text index for a doclist associated with a term or
** term-prefix.
*/
static int fts3TermSelectCb(
  Fts3Table *p,                   /* Virtual table object */
  void *pContext,                 /* Pointer to TermSelect structure */
  char *zTerm,
  int nTerm,
  char *aDoclist,
  int nDoclist
){
  TermSelect *pTS = (TermSelect *)pContext;



  UNUSED_PARAMETER(p);
  UNUSED_PARAMETER(zTerm);
  UNUSED_PARAMETER(nTerm);





  if( pTS->aaOutput[0]==0 ){
    /* If this is the first term selected, copy the doclist to the output
    ** buffer using memcpy(). TODO: Add a way to transfer control of the
    ** aDoclist buffer from the caller so as to avoid the memcpy().
    */
    pTS->aaOutput[0] = sqlite3_malloc(nDoclist);
    pTS->anOutput[0] = nDoclist;
    if( pTS->aaOutput[0] ){
      memcpy(pTS->aaOutput[0], aDoclist, nDoclist);
    }else{


      return SQLITE_NOMEM;

    }
  }else{
    int mergetype = (pTS->isReqPos ? MERGE_POS_OR : MERGE_OR);
    char *aMerge = aDoclist;
    int nMerge = nDoclist;
    int iOut;

    for(iOut=0; iOut<SizeofArray(pTS->aaOutput); iOut++){
      char *aNew;
      int nNew;
      if( pTS->aaOutput[iOut]==0 ){
        assert( iOut>0 );
        pTS->aaOutput[iOut] = aMerge;
        pTS->anOutput[iOut] = nMerge;
        break;
      }

      nNew = nMerge + pTS->anOutput[iOut];
      aNew = sqlite3_malloc(nNew);
      if( !aNew ){
        if( aMerge!=aDoclist ){
          sqlite3_free(aMerge);
        }
        return SQLITE_NOMEM;
      }
      fts3DoclistMerge(mergetype, 0, 0,
          aNew, &nNew, pTS->aaOutput[iOut], pTS->anOutput[iOut], aMerge, nMerge
      );

      if( iOut>0 ) sqlite3_free(aMerge);
      sqlite3_free(pTS->aaOutput[iOut]);
      pTS->aaOutput[iOut] = 0;

      aMerge = aNew;
      nMerge = nNew;
      if( (iOut+1)==SizeofArray(pTS->aaOutput) ){
        pTS->aaOutput[iOut] = aMerge;
        pTS->anOutput[iOut] = nMerge;
      }
    }
  }
  return SQLITE_OK;
}

/*
** This function retreives the doclist for the specified term (or term
** prefix) from the database. 
**
** The returned doclist may be in one of two formats, depending on the 
** value of parameter isReqPos. If isReqPos is zero, then the doclist is
** a sorted list of delta-compressed docids (a bare doclist). If isReqPos
** is non-zero, then the returned list is in the same format as is stored 
** in the database without the found length specifier at the start of on-disk
** doclists.
*/
static int fts3TermSelect(
  Fts3Table *p,                   /* Virtual table handle */
  int iColumn,                    /* Column to query (or -ve for all columns) */
  const char *zTerm,              /* Term to query for */
  int nTerm,                      /* Size of zTerm in bytes */

  filter.iCol = iColumn;
  filter.zTerm = zTerm;
  filter.nTerm = nTerm;

  rc = sqlite3Fts3SegReaderIterate(p, apSegment, nSegment, &filter,
      fts3TermSelectCb, (void *)&tsc
  );
  if( rc==SQLITE_OK ){
    rc = fts3TermSelectMerge(&tsc);
  }

  if( rc==SQLITE_OK ){
    *ppOut = tsc.aaOutput[0];
    *pnOut = tsc.anOutput[0];
  }else{
    for(i=0; i<SizeofArray(tsc.aaOutput); i++){
      sqlite3_free(tsc.aaOutput[i]);
    }
  }

finished:
  sqlite3_reset(pStmt);
  for(i=0; i<nSegment; i++){
    sqlite3Fts3SegReaderFree(p, apSegment[i]);
  }

    pLeft->nDoclist = nOut;
  }
  return rc;
}

/*
** Evaluate the full-text expression pExpr against fts3 table pTab. Store
** the resulting doclist in *paOut and *pnOut.  This routine mallocs for
** the space needed to store the output.  The caller is responsible for
** freeing the space when it has finished.
*/
static int evalFts3Expr(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3Expr *pExpr,                /* Parsed fts3 expression */
  char **paOut,                   /* OUT: Pointer to malloc'd result buffer */
  int *pnOut,                     /* OUT: Size of buffer at *paOut */
  int isReqPos                    /* Require positions in output buffer */

/*
** Maximum length of a varint encoded integer. The varint format is different
** from that used by SQLite, so the maximum length is 10, not 9.
*/
#define FTS3_VARINT_MAX 10

/*
** The testcase() macro is only used by the amalgamation.  If undefined,
** make it a no-op.
*/
#ifndef testcase
# define testcase(X)
#endif

/*
** Terminator values for position-lists and column-lists.
*/
#define POS_COLUMN  (1)     /* Column-list terminator */
#define POS_END     (0)     /* Position-list terminator */ 

/*
** This section provides definitions to allow the
** FTS3 extension to be compiled outside of the 
** amalgamation.
*/
#ifndef SQLITE_AMALGAMATION
/*

**     ....X.....X....
**
** This is done as part of extracting the snippet text, not when selecting
** the snippet. Snippet selection is done based on doclists only, so there
** is no way for fts3BestSnippet() to know whether or not the document 
** actually contains terms that follow the final highlighted term. 
*/
static int fts3SnippetShift(
  Fts3Table *pTab,                /* FTS3 table snippet comes from */
  int nSnippet,                   /* Number of tokens desired for snippet */
  const char *zDoc,               /* Document text to extract snippet from */
  int nDoc,                       /* Size of buffer zDoc in bytes */
  int *piPos,                     /* IN/OUT: First token of snippet */
  u64 *pHlmask                    /* IN/OUT: Mask of tokens to highlight */
){

      if( SQLITE_ROW==sqlite3_step(pRtree->pReadRowid) ){
        sqlite3_reset(pRtree->pReadRowid);
        rc = SQLITE_CONSTRAINT;
        goto constraint;
      }
      rc = sqlite3_reset(pRtree->pReadRowid);
    }
    *pRowid = cell.iRowid;

    if( rc==SQLITE_OK ){
      rc = ChooseLeaf(pRtree, &cell, 0, &pLeaf);
    }
    if( rc==SQLITE_OK ){
      int rc2;
      pRtree->iReinsertHeight = -1;

#-------------------------------------------------------------------------
# Ticket #3970: Check that the error message is meaningful when a 
# keyword is used as a column name.
#
do_test rtree-10.1 {
  catchsql { CREATE VIRTUAL TABLE t7 USING rtree(index, x1, y1, x2, y2) }
} {1 {near "index": syntax error}}

#-------------------------------------------------------------------------
# Test last_insert_rowid().
# 
do_test rtree-11.1 {
  execsql {
    CREATE VIRTUAL TABLE t8 USING rtree(idx, x1, x2, y1, y2);
    INSERT INTO t8 VALUES(1, 1.0, 1.0, 2.0, 2.0);
    SELECT last_insert_rowid();
  }
} {1}
do_test rtree-11.2 {
  execsql {
    INSERT INTO t8 VALUES(NULL, 1.0, 1.0, 2.0, 2.0);
    SELECT last_insert_rowid();
  }
} {2}

finish_test

         mutex.o mutex_noop.o mutex_os2.o mutex_unix.o mutex_w32.o \
         notify.o opcodes.o os.o os_os2.o os_unix.o os_win.o \
         pager.o parse.o pcache.o pcache1.o pragma.o prepare.o printf.o \
         random.o resolve.o rowset.o rtree.o select.o status.o \
         table.o tokenize.o trigger.o \
         update.o util.o vacuum.o \
         vdbe.o vdbeapi.o vdbeaux.o vdbeblob.o vdbemem.o vdbetrace.o \
         wal.o walker.o where.o utf.o vtab.o



# All of the source code files.
#
SRC = \
  $(TOP)/src/alter.c \

  $(TOP)/src/vdbeapi.c \
  $(TOP)/src/vdbeaux.c \
  $(TOP)/src/vdbeblob.c \
  $(TOP)/src/vdbemem.c \
  $(TOP)/src/vdbetrace.c \
  $(TOP)/src/vdbeInt.h \
  $(TOP)/src/vtab.c \
  $(TOP)/src/wal.c \
  $(TOP)/src/wal.h \
  $(TOP)/src/walker.c \
  $(TOP)/src/where.c

# Source code for extensions
#
SRC += \
  $(TOP)/ext/fts1/fts1.c \

  $(TOP)/src/test8.c \
  $(TOP)/src/test9.c \
  $(TOP)/src/test_autoext.c \
  $(TOP)/src/test_async.c \
  $(TOP)/src/test_backup.c \
  $(TOP)/src/test_btree.c \
  $(TOP)/src/test_config.c \
  $(TOP)/src/test_demovfs.c \
  $(TOP)/src/test_devsym.c \
  $(TOP)/src/test_func.c \
  $(TOP)/src/test_hexio.c \
  $(TOP)/src/test_init.c \
  $(TOP)/src/test_intarray.c \
  $(TOP)/src/test_journal.c \
  $(TOP)/src/test_malloc.c \
  $(TOP)/src/test_mutex.c \
  $(TOP)/src/test_onefile.c \
  $(TOP)/src/test_osinst.c \
  $(TOP)/src/test_pcache.c \
  $(TOP)/src/test_schema.c \
  $(TOP)/src/test_server.c \
  $(TOP)/src/test_stat.c \
  $(TOP)/src/test_tclvar.c \
  $(TOP)/src/test_thread.c \
  $(TOP)/src/test_vfs.c \
  $(TOP)/src/test_wsd.c

#TESTSRC += $(TOP)/ext/fts2/fts2_tokenizer.c
#TESTSRC += $(TOP)/ext/fts3/fts3_tokenizer.c

TESTSRC2 = \
  $(TOP)/src/attach.c \
  $(TOP)/src/backup.c \
  $(TOP)/src/btree.c \
  $(TOP)/src/build.c \
  $(TOP)/src/date.c \
  $(TOP)/src/expr.c \
  $(TOP)/src/func.c \
  $(TOP)/src/insert.c \
  $(TOP)/src/wal.c \
  $(TOP)/src/mem5.c \
  $(TOP)/src/os.c \
  $(TOP)/src/os_os2.c \
  $(TOP)/src/os_unix.c \
  $(TOP)/src/os_win.c \
  $(TOP)/src/pager.c \
  $(TOP)/src/pragma.c \
  $(TOP)/src/prepare.c \
  $(TOP)/src/printf.c \
  $(TOP)/src/random.c \
  $(TOP)/src/pcache.c \
  $(TOP)/src/pcache1.c \
  $(TOP)/src/select.c \
  $(TOP)/src/tokenize.c \
  $(TOP)/src/utf.c \
  $(TOP)/src/util.c \
  $(TOP)/src/vdbeapi.c \
  $(TOP)/src/vdbeaux.c \
  $(TOP)/src/vdbe.c \
  $(TOP)/src/vdbemem.c \
  $(TOP)/src/where.c \
  parse.c \
  $(TOP)/ext/fts3/fts3.c \
  $(TOP)/ext/fts3/fts3_expr.c \
  $(TOP)/ext/fts3/fts3_tokenizer.c \
  $(TOP)/ext/fts3/fts3_write.c \
  $(TOP)/ext/async/sqlite3async.c

# Header files used by all library source files.
#
HDR = \
   $(TOP)/src/btree.h \
   $(TOP)/src/btreeInt.h \

	$(RANLIB) libsqlite3.a

sqlite3$(EXE):	$(TOP)/src/shell.c libsqlite3.a sqlite3.h
	$(TCCX) $(READLINE_FLAGS) -o sqlite3$(EXE)                  \
		$(TOP)/src/shell.c                                  \
		libsqlite3.a $(LIBREADLINE) $(TLIBS) $(THREADLIB)



# This target creates a directory named "tsrc" and fills it with
# copies of all of the C source code and header files needed to
# build on the target system.  Some of the C source code and header
# files are automatically generated.  This target takes care of
# all that automatic generation.
#
target_source:	$(SRC) $(EXTHDR) $(TOP)/tool/vdbe-compress.tcl

parse.h:	parse.c

parse.c:	$(TOP)/src/parse.y lemon $(TOP)/addopcodes.awk
	cp $(TOP)/src/parse.y .
	rm -f parse.h
	./lemon $(OPTS) parse.y
	mv parse.h parse.h.temp
	$(NAWK) -f $(TOP)/addopcodes.awk parse.h.temp >parse.h

sqlite3.h:	$(TOP)/src/sqlite.h.in $(TOP)/manifest.uuid $(TOP)/VERSION
	tclsh $(TOP)/tool/mksqlite3h.tcl $(TOP) >sqlite3.h

keywordhash.h:	$(TOP)/tool/mkkeywordhash.c
	$(BCC) -o mkkeywordhash $(OPTS) $(TOP)/tool/mkkeywordhash.c
	./mkkeywordhash >keywordhash.h

tclsqlite3:	$(TOP)/src/tclsqlite.c libsqlite3.a
	$(TCCX) $(TCL_FLAGS) -DTCLSH=1 -o tclsqlite3 \
		$(TOP)/src/tclsqlite.c libsqlite3.a $(LIBTCL) $(THREADLIB)


# Rules to build the 'testfixture' application.
#
TESTFIXTURE_FLAGS  = -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1
TESTFIXTURE_FLAGS += -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE 

testfixture$(EXE): $(TESTSRC2) libsqlite3.a $(TESTSRC) $(TOP)/src/tclsqlite.c
	$(TCCX) $(TCL_FLAGS) -DTCLSH=1 $(TESTFIXTURE_FLAGS)                  \
		$(TESTSRC) $(TESTSRC2) $(TOP)/src/tclsqlite.c                \
		-o testfixture$(EXE) $(LIBTCL) $(THREADLIB) libsqlite3.a

amalgamation-testfixture$(EXE): sqlite3.c $(TESTSRC) $(TOP)/src/tclsqlite.c
	$(TCCX) $(TCL_FLAGS) -DTCLSH=1 $(TESTFIXTURE_FLAGS)                  \
		$(TESTSRC) $(TOP)/src/tclsqlite.c sqlite3.c                  \
		-o testfixture$(EXE) $(LIBTCL) $(THREADLIB)

fts3-testfixture$(EXE): sqlite3.c fts3amal.c $(TESTSRC) $(TOP)/src/tclsqlite.c
	$(TCCX) $(TCL_FLAGS) -DTCLSH=1 $(TESTFIXTURE_FLAGS)                  \
	-DSQLITE_ENABLE_FTS3=1                                               \
		$(TESTSRC) $(TOP)/src/tclsqlite.c sqlite3.c fts3amal.c       \
		-o testfixture$(EXE) $(LIBTCL) $(THREADLIB)

fulltest:	testfixture$(EXE) sqlite3$(EXE)
	./testfixture$(EXE) $(TOP)/test/all.test

soaktest:	testfixture$(EXE) sqlite3$(EXE)
	./testfixture$(EXE) $(TOP)/test/all.test -soak=1

test:	testfixture$(EXE) sqlite3$(EXE)
	./testfixture$(EXE) $(TOP)/test/veryquick.test

sqlite3_analyzer$(EXE):	$(TOP)/src/tclsqlite.c sqlite3.c $(TESTSRC) \
			$(TOP)/tool/spaceanal.tcl
	sed \
	  -e '/^#/d' \
	  -e 's,\\,\\\\,g' \
	  -e 's,",\\",g' \
	  -e 's,^,",' \
	  -e 's,$$,\\n",' \
	  $(TOP)/tool/spaceanal.tcl >spaceanal_tcl.h
	$(TCCX) $(TCL_FLAGS) -DTCLSH=2 $(TESTFIXTURE_FLAGS)                    \
		-DSQLITE_TEST=1 -DSQLITE_PRIVATE=""                            \
		$(TESTSRC) $(TOP)/src/tclsqlite.c sqlite3.c                    \
		-o sqlite3_analyzer$(EXE)                                      \
		$(LIBTCL) $(THREADLIB)

TEST_EXTENSION = $(SHPREFIX)testloadext.$(SO)
$(TEST_EXTENSION): $(TOP)/src/test_loadext.c
	$(MKSHLIB) $(TOP)/src/test_loadext.c -o $(TEST_EXTENSION)

  }
}
#endif   /* !SQLITE_OMIT_TRIGGER */

/*
** Register built-in functions used to help implement ALTER TABLE
*/
void sqlite3AlterFunctions(void){
  static SQLITE_WSD FuncDef aAlterTableFuncs[] = {
    FUNCTION(sqlite_rename_table,   2, 0, 0, renameTableFunc),
#ifndef SQLITE_OMIT_TRIGGER
    FUNCTION(sqlite_rename_trigger, 2, 0, 0, renameTriggerFunc),

#endif
#ifndef SQLITE_OMIT_FOREIGN_KEY
    FUNCTION(sqlite_rename_parent,  3, 0, 0, renameParentFunc),

#endif
  };
  int i;
  FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
  FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aAlterTableFuncs);

  for(i=0; i<ArraySize(aAlterTableFuncs); i++){
    sqlite3FuncDefInsert(pHash, &aFunc[i]);
  }
}

/*
** This function is used to create the text of expressions of the form:
**
**   name=<constant1> OR name=<constant2> OR ...
**

  int nTabName;             /* Number of UTF-8 characters in zTabName */
  const char *zTabName;     /* Original name of the table */
  Vdbe *v;
#ifndef SQLITE_OMIT_TRIGGER
  char *zWhere = 0;         /* Where clause to locate temp triggers */
#endif
  VTable *pVTab = 0;        /* Non-zero if this is a v-tab with an xRename() */
  int savedDbFlags;         /* Saved value of db->flags */

  savedDbFlags = db->flags;  
  if( NEVER(db->mallocFailed) ) goto exit_rename_table;
  assert( pSrc->nSrc==1 );
  assert( sqlite3BtreeHoldsAllMutexes(pParse->db) );

  pTab = sqlite3LocateTable(pParse, 0, pSrc->a[0].zName, pSrc->a[0].zDatabase);
  if( !pTab ) goto exit_rename_table;
  iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
  zDb = db->aDb[iDb].zName;
  db->flags |= SQLITE_PreferBuiltin;

  /* Get a NULL terminated version of the new table name. */
  zName = sqlite3NameFromToken(db, pName);
  if( !zName ) goto exit_rename_table;

  /* Check that a table or index named 'zName' does not already exist
  ** in database iDb. If so, this is an error.

  /* Drop and reload the internal table schema. */
  reloadTableSchema(pParse, pTab, zName);

exit_rename_table:
  sqlite3SrcListDelete(db, pSrc);
  sqlite3DbFree(db, zName);
  db->flags = savedDbFlags;
}


/*
** Generate code to make sure the file format number is at least minFormat.
** The generated code will increase the file format number if necessary.
*/

    sqlite3ValueFree(pVal);
  }

  /* Modify the CREATE TABLE statement. */
  zCol = sqlite3DbStrNDup(db, (char*)pColDef->z, pColDef->n);
  if( zCol ){
    char *zEnd = &zCol[pColDef->n-1];
    int savedDbFlags = db->flags;
    while( zEnd>zCol && (*zEnd==';' || sqlite3Isspace(*zEnd)) ){
      *zEnd-- = '\0';
    }
    db->flags |= SQLITE_PreferBuiltin;
    sqlite3NestedParse(pParse, 
        "UPDATE \"%w\".%s SET "
          "sql = substr(sql,1,%d) || ', ' || %Q || substr(sql,%d) "
        "WHERE type = 'table' AND name = %Q", 
      zDb, SCHEMA_TABLE(iDb), pNew->addColOffset, zCol, pNew->addColOffset+1,
      zTab
    );
    sqlite3DbFree(db, zCol);
    db->flags = savedDbFlags;
  }

  /* If the default value of the new column is NULL, then set the file
  ** format to 2. If the default value of the new column is not NULL,
  ** the file format becomes 3.
  */
  sqlite3MinimumFileFormat(pParse, iDb, pDflt ? 3 : 2);

*/
static void openStatTable(
  Parse *pParse,          /* Parsing context */
  int iDb,                /* The database we are looking in */
  int iStatCur,           /* Open the sqlite_stat1 table on this cursor */
  const char *zWhere      /* Delete entries associated with this table */
){
  static const struct {
    const char *zName;
    const char *zCols;
  } aTable[] = {
    { "sqlite_stat1", "tbl,idx,stat" },
#ifdef SQLITE_ENABLE_STAT2
    { "sqlite_stat2", "tbl,idx,sampleno,sample" },
#endif

                    sqlite3_column_text(pStmt, 2)
                );
                int n = sqlite3_column_bytes(pStmt, 2);
                if( n>24 ){
                  n = 24;
                }
                pSample->nByte = (u8)n;
                if( n < 1){
                  pSample->u.z = 0;
                }else{
                  pSample->u.z = sqlite3DbMallocRaw(dbMem, n);
                  if( pSample->u.z ){
                    memcpy(pSample->u.z, z, n);
                  }else{
                    db->mallocFailed = 1;
                    break;
                  }
                }
              }
            }
          }
        }
      }
      rc = sqlite3_finalize(pStmt);

    }else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){
      zErrDyn = sqlite3MPrintf(db, 
        "attached databases must use the same text encoding as main database");
      rc = SQLITE_ERROR;
    }
    pPager = sqlite3BtreePager(aNew->pBt);
    sqlite3PagerLockingMode(pPager, db->dfltLockMode);

    sqlite3BtreeSecureDelete(aNew->pBt,
                             sqlite3BtreeSecureDelete(db->aDb[0].pBt,-1) );
  }
  aNew->safety_level = 3;
  aNew->zName = sqlite3DbStrDup(db, zName);
  if( rc==SQLITE_OK && aNew->zName==0 ){
    rc = SQLITE_NOMEM;

/*
** This procedure generates VDBE code for a single invocation of either the
** sqlite_detach() or sqlite_attach() SQL user functions.
*/
static void codeAttach(
  Parse *pParse,       /* The parser context */
  int type,            /* Either SQLITE_ATTACH or SQLITE_DETACH */
  FuncDef const *pFunc,/* FuncDef wrapper for detachFunc() or attachFunc() */
  Expr *pAuthArg,      /* Expression to pass to authorization callback */
  Expr *pFilename,     /* Name of database file */
  Expr *pDbname,       /* Name of the database to use internally */
  Expr *pKey           /* Database key for encryption extension */
){
  int rc;
  NameContext sName;

/*
** Called by the parser to compile a DETACH statement.
**
**     DETACH pDbname
*/
void sqlite3Detach(Parse *pParse, Expr *pDbname){
  static const FuncDef detach_func = {
    1,                /* nArg */
    SQLITE_UTF8,      /* iPrefEnc */
    0,                /* flags */
    0,                /* pUserData */
    0,                /* pNext */
    detachFunc,       /* xFunc */
    0,                /* xStep */
    0,                /* xFinalize */
    "sqlite_detach",  /* zName */
    0                 /* pHash */
  };
  codeAttach(pParse, SQLITE_DETACH, &detach_func, pDbname, 0, 0, pDbname);
}

/*
** Called by the parser to compile an ATTACH statement.
**
**     ATTACH p AS pDbname KEY pKey
*/
void sqlite3Attach(Parse *pParse, Expr *p, Expr *pDbname, Expr *pKey){
  static const FuncDef attach_func = {
    3,                /* nArg */
    SQLITE_UTF8,      /* iPrefEnc */
    0,                /* flags */
    0,                /* pUserData */
    0,                /* pNext */
    attachFunc,       /* xFunc */
    0,                /* xStep */

  assert( !isFatalError(p->rc) );
  assert( iSrcPg!=PENDING_BYTE_PAGE(p->pSrc->pBt) );
  assert( zSrcData );

  /* Catch the case where the destination is an in-memory database and the
  ** page sizes of the source and destination differ. 
  */
  if( nSrcPgsz!=nDestPgsz && sqlite3PagerIsMemdb(pDestPager) ){
    rc = SQLITE_READONLY;
  }

  /* This loop runs once for each destination page spanned by the source 
  ** page. For each iteration, variable iOff is set to the byte offset
  ** of the destination page.
  */

}

/*
** Copy nPage pages from the source b-tree to the destination.
*/
int sqlite3_backup_step(sqlite3_backup *p, int nPage){
  int rc;
  int destMode;       /* Destination journal mode */
  int pgszSrc = 0;    /* Source page size */
  int pgszDest = 0;   /* Destination page size */

  sqlite3_mutex_enter(p->pSrcDb->mutex);
  sqlite3BtreeEnter(p->pSrc);
  if( p->pDestDb ){
    sqlite3_mutex_enter(p->pDestDb->mutex);
  }

    ** one now. If a transaction is opened here, then it will be closed
    ** before this function exits.
    */
    if( rc==SQLITE_OK && 0==sqlite3BtreeIsInReadTrans(p->pSrc) ){
      rc = sqlite3BtreeBeginTrans(p->pSrc, 0);
      bCloseTrans = 1;
    }

    /* Do not allow backup if the destination database is in WAL mode
    ** and the page sizes are different between source and destination */
    pgszSrc = sqlite3BtreeGetPageSize(p->pSrc);
    pgszDest = sqlite3BtreeGetPageSize(p->pDest);
    destMode = sqlite3PagerGetJournalMode(sqlite3BtreePager(p->pDest));
    if( SQLITE_OK==rc && destMode==PAGER_JOURNALMODE_WAL && pgszSrc!=pgszDest ){
      rc = SQLITE_READONLY;
    }
  
    /* Now that there is a read-lock on the source database, query the
    ** source pager for the number of pages in the database.
    */
    nSrcPage = (int)sqlite3BtreeLastPage(p->pSrc);
    assert( nSrcPage>=0 );

    for(ii=0; (nPage<0 || ii<nPage) && p->iNext<=(Pgno)nSrcPage && !rc; ii++){
      const Pgno iSrcPg = p->iNext;                 /* Source page number */
      if( iSrcPg!=PENDING_BYTE_PAGE(p->pSrc->pBt) ){
        DbPage *pSrcPg;                             /* Source page object */
        rc = sqlite3PagerGet(pSrcPager, iSrcPg, &pSrcPg);
        if( rc==SQLITE_OK ){
          rc = backupOnePage(p, iSrcPg, sqlite3PagerGetData(pSrcPg));

    ** is to make sure that the schema-version really does change in
    ** the case where the source and destination databases have the
    ** same schema version.
    */
    if( rc==SQLITE_DONE 
     && (rc = sqlite3BtreeUpdateMeta(p->pDest,1,p->iDestSchema+1))==SQLITE_OK
    ){


      int nDestTruncate;
  
      if( p->pDestDb ){
        sqlite3ResetInternalSchema(p->pDestDb, 0);
      }

      /* Set nDestTruncate to the final number of pages in the destination
      ** database. The complication here is that the destination page
      ** size may be different to the source page size. 
      **
      ** If the source page size is smaller than the destination page size, 
      ** round up. In this case the call to sqlite3OsTruncate() below will
      ** fix the size of the file. However it is important to call
      ** sqlite3PagerTruncateImage() here so that any pages in the 
      ** destination file that lie beyond the nDestTruncate page mark are
      ** journalled by PagerCommitPhaseOne() before they are destroyed
      ** by the file truncation.
      */
      assert( pgszSrc==sqlite3BtreeGetPageSize(p->pSrc) );
      assert( pgszDest==sqlite3BtreeGetPageSize(p->pDest) );
      if( pgszSrc<pgszDest ){
        int ratio = pgszDest/pgszSrc;
        nDestTruncate = (nSrcPage+ratio-1)/ratio;
        if( nDestTruncate==(int)PENDING_BYTE_PAGE(p->pDest->pBt) ){
          nDestTruncate--;
        }
      }else{
        nDestTruncate = nSrcPage * (pgszSrc/pgszDest);
      }
      sqlite3PagerTruncateImage(pDestPager, nDestTruncate);

      if( pgszSrc<pgszDest ){
        /* If the source page-size is smaller than the destination page-size,
        ** two extra things may need to happen:
        **
        **   * The destination may need to be truncated, and
        **
        **   * Data stored on the pages immediately following the 
        **     pending-byte page in the source database may need to be
        **     copied into the destination database.
        */
        const i64 iSize = (i64)pgszSrc * (i64)nSrcPage;
        sqlite3_file * const pFile = sqlite3PagerFile(pDestPager);

        assert( pFile );
        assert( (i64)nDestTruncate*(i64)pgszDest >= iSize || (
              nDestTruncate==(int)(PENDING_BYTE_PAGE(p->pDest->pBt)-1)
           && iSize>=PENDING_BYTE && iSize<=PENDING_BYTE+pgszDest
        ));
        if( SQLITE_OK==(rc = sqlite3PagerCommitPhaseOne(pDestPager, 0, 1))
         && SQLITE_OK==(rc = backupTruncateFile(pFile, iSize))
         && SQLITE_OK==(rc = sqlite3PagerSync(pDestPager))
        ){
          i64 iOff;
          i64 iEnd = MIN(PENDING_BYTE + pgszDest, iSize);
          for(
            iOff=PENDING_BYTE+pgszSrc; 
            rc==SQLITE_OK && iOff<iEnd; 
            iOff+=pgszSrc
          ){
            PgHdr *pSrcPg = 0;
            const Pgno iSrcPg = (Pgno)((iOff/pgszSrc)+1);
            rc = sqlite3PagerGet(pSrcPager, iSrcPg, &pSrcPg);
            if( rc==SQLITE_OK ){
              u8 *zData = sqlite3PagerGetData(pSrcPg);
              rc = sqlite3OsWrite(pFile, zData, pgszSrc, iOff);
            }
            sqlite3PagerUnref(pSrcPg);
          }
        }
      }else{
        rc = sqlite3PagerCommitPhaseOne(pDestPager, 0, 0);
      }

    if( bCloseTrans ){
      TESTONLY( int rc2 );
      TESTONLY( rc2  = ) sqlite3BtreeCommitPhaseOne(p->pSrc, 0);
      TESTONLY( rc2 |= ) sqlite3BtreeCommitPhaseTwo(p->pSrc);
      assert( rc2==SQLITE_OK );
    }
  
    if( rc==SQLITE_IOERR_NOMEM ){
      rc = SQLITE_NOMEM;
    }
    p->rc = rc;
  }
  if( p->pDestDb ){
    sqlite3_mutex_leave(p->pDestDb->mutex);
  }
  sqlite3BtreeLeave(p->pSrc);
  sqlite3_mutex_leave(p->pSrcDb->mutex);

** optimization 2 above is omitted if the corresponding bit is already
** set in BtShared.pHasContent. The contents of the bitvec are cleared
** at the end of every transaction.
*/
static int btreeSetHasContent(BtShared *pBt, Pgno pgno){
  int rc = SQLITE_OK;
  if( !pBt->pHasContent ){
    assert( pgno<=pBt->nPage );



    pBt->pHasContent = sqlite3BitvecCreate(pBt->nPage);
    if( !pBt->pHasContent ){
      rc = SQLITE_NOMEM;
    }
  }
  if( rc==SQLITE_OK && pgno<=sqlite3BitvecSize(pBt->pHasContent) ){
    rc = sqlite3BitvecSet(pBt->pHasContent, pgno);
  }

  return 0;
}

/*
** Return the size of the database file in pages. If there is any kind of
** error, return ((unsigned int)-1).
*/
static Pgno btreePagecount(BtShared *pBt){
  return pBt->nPage;

}
u32 sqlite3BtreeLastPage(Btree *p){
  assert( sqlite3BtreeHoldsMutex(p) );
  assert( ((p->pBt->nPage)&0x8000000)==0 );
  return (int)btreePagecount(p->pBt);
}

/*
** Get a page from the pager and initialize it.  This routine is just a
** convenience wrapper around separate calls to btreeGetPage() and 
** btreeInitPage().
**
** If an error occurs, then the value *ppPage is set to is undefined. It
** may remain unchanged, or it may be set to an invalid value.
*/
static int getAndInitPage(
  BtShared *pBt,          /* The database file */
  Pgno pgno,           /* Number of the page to get */
  MemPage **ppPage     /* Write the page pointer here */
){
  int rc;

  assert( sqlite3_mutex_held(pBt->mutex) );

  if( pgno>btreePagecount(pBt) ){
    rc = SQLITE_CORRUPT_BKPT;
  }else{
    rc = btreeGetPage(pBt, pgno, ppPage, 0);
    if( rc==SQLITE_OK ){
      rc = btreeInitPage(*ppPage);
      if( rc!=SQLITE_OK ){
        releasePage(*ppPage);
      }
    }
  }






  testcase( pgno==0 );

  assert( pgno!=0 || rc==SQLITE_CORRUPT );
  return rc;
}

/*
** Release a MemPage.  This should be called once for each prior
** call to btreeGetPage.
*/

**
** SQLITE_OK is returned on success.  If the file is not a
** well-formed database file, then SQLITE_CORRUPT is returned.
** SQLITE_BUSY is returned if the database is locked.  SQLITE_NOMEM
** is returned if we run out of memory. 
*/
static int lockBtree(BtShared *pBt){
  int rc;              /* Result code from subfunctions */
  MemPage *pPage1;     /* Page 1 of the database file */
  int nPage;           /* Number of pages in the database */
  int nPageFile = 0;   /* Number of pages in the database file */
  int nPageHeader;     /* Number of pages in the database according to hdr */

  assert( sqlite3_mutex_held(pBt->mutex) );
  assert( pBt->pPage1==0 );
  rc = sqlite3PagerSharedLock(pBt->pPager);
  if( rc!=SQLITE_OK ) return rc;
  rc = btreeGetPage(pBt, 1, &pPage1, 0);
  if( rc!=SQLITE_OK ) return rc;

  /* Do some checking to help insure the file we opened really is
  ** a valid database file. 
  */
  nPage = nPageHeader = get4byte(28+(u8*)pPage1->aData);
  if( (rc = sqlite3PagerPagecount(pBt->pPager, &nPageFile))!=SQLITE_OK ){;

    goto page1_init_failed;
  }
  if( nPage==0 || memcmp(24+(u8*)pPage1->aData, 92+(u8*)pPage1->aData,4)!=0 ){
    nPage = nPageFile;
  }
  if( nPage>0 ){
    int pageSize;
    int usableSize;
    u8 *page1 = pPage1->aData;
    rc = SQLITE_NOTADB;
    if( memcmp(page1, zMagicHeader, 16)!=0 ){
      goto page1_init_failed;
    }

#ifdef SQLITE_OMIT_WAL
    if( page1[18]>1 ){
      pBt->readOnly = 1;
    }
    if( page1[19]>1 ){
      goto page1_init_failed;
    }
#else
    if( page1[18]>2 ){
      pBt->readOnly = 1;
    }
    if( page1[19]>2 ){
      goto page1_init_failed;
    }

    /* If the write version is set to 2, this database should be accessed
    ** in WAL mode. If the log is not already open, open it now. Then 
    ** return SQLITE_OK and return without populating BtShared.pPage1.
    ** The caller detects this and calls this function again. This is
    ** required as the version of page 1 currently in the page1 buffer
    ** may not be the latest version - there may be a newer one in the log
    ** file.
    */
    if( page1[19]==2 && pBt->doNotUseWAL==0 ){
      int isOpen = 0;
      rc = sqlite3PagerOpenWal(pBt->pPager, &isOpen);
      if( rc!=SQLITE_OK ){
        goto page1_init_failed;
      }else if( isOpen==0 ){
        releasePage(pPage1);
        return SQLITE_OK;
      }
      rc = SQLITE_NOTADB;
    }
#endif

    /* The maximum embedded fraction must be exactly 25%.  And the minimum
    ** embedded fraction must be 12.5% for both leaf-data and non-leaf-data.
    ** The original design allowed these amounts to vary, but as of
    ** version 3.6.0, we require them to be fixed.
    */
    if( memcmp(&page1[21], "\100\040\040",3)!=0 ){

      pBt->usableSize = (u16)usableSize;
      pBt->pageSize = (u16)pageSize;
      freeTempSpace(pBt);
      rc = sqlite3PagerSetPagesize(pBt->pPager, &pBt->pageSize,
                                   pageSize-usableSize);
      return rc;
    }
    if( nPageHeader>nPageFile ){
      rc = SQLITE_CORRUPT_BKPT;
      goto page1_init_failed;
    }
    if( usableSize<480 ){
      goto page1_init_failed;
    }
    pBt->pageSize = (u16)pageSize;
    pBt->usableSize = (u16)usableSize;
#ifndef SQLITE_OMIT_AUTOVACUUM
    pBt->autoVacuum = (get4byte(&page1[36 + 4*4])?1:0);

  */
  pBt->maxLocal = (pBt->usableSize-12)*64/255 - 23;
  pBt->minLocal = (pBt->usableSize-12)*32/255 - 23;
  pBt->maxLeaf = pBt->usableSize - 35;
  pBt->minLeaf = (pBt->usableSize-12)*32/255 - 23;
  assert( pBt->maxLeaf + 23 <= MX_CELL_SIZE(pBt) );
  pBt->pPage1 = pPage1;
  pBt->nPage = nPage;
  return SQLITE_OK;

page1_init_failed:
  releasePage(pPage1);
  pBt->pPage1 = 0;
  return rc;
}

** into a new empty database by initializing the first page of
** the database.
*/
static int newDatabase(BtShared *pBt){
  MemPage *pP1;
  unsigned char *data;
  int rc;


  assert( sqlite3_mutex_held(pBt->mutex) );

  if( pBt->nPage>0 ){
    return SQLITE_OK;
  }
  pP1 = pBt->pPage1;
  assert( pP1!=0 );
  data = pP1->aData;
  rc = sqlite3PagerWrite(pP1->pDbPage);
  if( rc ) return rc;
  memcpy(data, zMagicHeader, sizeof(zMagicHeader));

  pBt->pageSizeFixed = 1;
#ifndef SQLITE_OMIT_AUTOVACUUM
  assert( pBt->autoVacuum==1 || pBt->autoVacuum==0 );
  assert( pBt->incrVacuum==1 || pBt->incrVacuum==0 );
  put4byte(&data[36 + 4*4], pBt->autoVacuum);
  put4byte(&data[36 + 7*4], pBt->incrVacuum);
#endif
  pBt->nPage = 1;
  data[31] = 1;
  return SQLITE_OK;
}

/*
** Attempt to start a new transaction. A write-transaction
** is started if the second argument is nonzero, otherwise a read-
** transaction.  If the second argument is 2 or more and exclusive

  /* Any read-only or read-write transaction implies a read-lock on 
  ** page 1. So if some other shared-cache client already has a write-lock 
  ** on page 1, the transaction cannot be opened. */
  rc = querySharedCacheTableLock(p, MASTER_ROOT, READ_LOCK);
  if( SQLITE_OK!=rc ) goto trans_begun;

  pBt->initiallyEmpty = (u8)(pBt->nPage==0);
  do {
    /* Call lockBtree() until either pBt->pPage1 is populated or
    ** lockBtree() returns something other than SQLITE_OK. lockBtree()
    ** may return SQLITE_OK but leave pBt->pPage1 set to 0 if after
    ** reading page 1 it discovers that the page-size of the database 
    ** file is not pBt->pageSize. In this case lockBtree() will update
    ** pBt->pageSize to the page-size of the file on disk.

        }
      }
    }
  
    if( rc!=SQLITE_OK ){
      unlockBtreeIfUnused(pBt);
    }
  }while( (rc&0xFF)==SQLITE_BUSY && pBt->inTransaction==TRANS_NONE &&
          btreeInvokeBusyHandler(pBt) );

  if( rc==SQLITE_OK ){
    if( p->inTrans==TRANS_NONE ){
      pBt->nTransaction++;
#ifndef SQLITE_OMIT_SHARED_CACHE
      if( p->sharable ){
	assert( p->lock.pBtree==p && p->lock.iTable==1 );
        p->lock.eLock = READ_LOCK;
        p->lock.pNext = pBt->pLock;
        pBt->pLock = &p->lock;
      }
#endif
    }
    p->inTrans = (wrflag?TRANS_WRITE:TRANS_READ);
    if( p->inTrans>pBt->inTransaction ){
      pBt->inTransaction = p->inTrans;
    }

    if( wrflag ){
      MemPage *pPage1 = pBt->pPage1;
#ifndef SQLITE_OMIT_SHARED_CACHE
      assert( !pBt->pWriter );
      pBt->pWriter = p;
      pBt->isExclusive = (u8)(wrflag>1);
#endif

      /* If the db-size header field is incorrect (as it may be if an old
      ** client has been writing the database file), update it now. Doing
      ** this sooner rather than later means the database size can safely 
      ** re-read the database size from page 1 if a savepoint or transaction
      ** rollback occurs within the transaction.
      */
      if( pBt->nPage!=get4byte(&pPage1->aData[28]) ){
        rc = sqlite3PagerWrite(pPage1->pDbPage);
        if( rc==SQLITE_OK ){
          put4byte(&pPage1->aData[28], pBt->nPage);
        }
      }
    }
  }


trans_begun:
  if( rc==SQLITE_OK && wrflag ){
    /* This call makes sure that the pager has the correct number of
    ** open savepoints. If the second parameter is greater than 0 and

** process is complete.  If nFin is zero, it is assumed that
** incrVacuumStep() will be called a finite amount of times
** which may or may not empty the freelist.  A full autovacuum
** has nFin>0.  A "PRAGMA incremental_vacuum" has nFin==0.
*/
static int incrVacuumStep(BtShared *pBt, Pgno nFin, Pgno iLastPg){
  Pgno nFreeList;           /* Number of pages still on the free-list */
  int rc;

  assert( sqlite3_mutex_held(pBt->mutex) );
  assert( iLastPg>nFin );

  if( !PTRMAP_ISPAGE(pBt, iLastPg) && iLastPg!=PENDING_BYTE_PAGE(pBt) ){

    u8 eType;
    Pgno iPtrPage;

    nFreeList = get4byte(&pBt->pPage1->aData[36]);
    if( nFreeList==0 ){
      return SQLITE_DONE;
    }

  }

  if( nFin==0 ){
    iLastPg--;
    while( iLastPg==PENDING_BYTE_PAGE(pBt)||PTRMAP_ISPAGE(pBt, iLastPg) ){
      if( PTRMAP_ISPAGE(pBt, iLastPg) ){
        MemPage *pPg;
        rc = btreeGetPage(pBt, iLastPg, &pPg, 0);
        if( rc!=SQLITE_OK ){
          return rc;
        }
        rc = sqlite3PagerWrite(pPg->pDbPage);
        releasePage(pPg);
        if( rc!=SQLITE_OK ){
          return rc;
        }
      }
      iLastPg--;
    }
    sqlite3PagerTruncateImage(pBt->pPager, iLastPg);
    pBt->nPage = iLastPg;
  }
  return SQLITE_OK;
}

/*
** A write-transaction must be opened before calling this function.
** It performs a single unit of work towards an incremental vacuum.

  sqlite3BtreeEnter(p);
  assert( pBt->inTransaction==TRANS_WRITE && p->inTrans==TRANS_WRITE );
  if( !pBt->autoVacuum ){
    rc = SQLITE_DONE;
  }else{
    invalidateAllOverflowCache(pBt);
    rc = incrVacuumStep(pBt, 0, btreePagecount(pBt));
    if( rc==SQLITE_OK ){
      rc = sqlite3PagerWrite(pBt->pPage1->pDbPage);
      put4byte(&pBt->pPage1->aData[28], pBt->nPage);
    }
  }
  sqlite3BtreeLeave(p);
  return rc;
}

/*
** This routine is called prior to sqlite3PagerCommit when a transaction

    Pgno nFin;         /* Number of pages in database after autovacuuming */
    Pgno nFree;        /* Number of pages on the freelist initially */
    Pgno nPtrmap;      /* Number of PtrMap pages to be freed */
    Pgno iFree;        /* The next page to be freed */
    int nEntry;        /* Number of entries on one ptrmap page */
    Pgno nOrig;        /* Database size before freeing */

    nOrig = btreePagecount(pBt);
    if( PTRMAP_ISPAGE(pBt, nOrig) || nOrig==PENDING_BYTE_PAGE(pBt) ){
      /* It is not possible to create a database for which the final page
      ** is either a pointer-map page or the pending-byte page. If one
      ** is encountered, this indicates corruption.
      */
      return SQLITE_CORRUPT_BKPT;
    }

    }
    if( nFin>nOrig ) return SQLITE_CORRUPT_BKPT;

    for(iFree=nOrig; iFree>nFin && rc==SQLITE_OK; iFree--){
      rc = incrVacuumStep(pBt, nFin, iFree);
    }
    if( (rc==SQLITE_DONE || rc==SQLITE_OK) && nFree>0 ){

      rc = sqlite3PagerWrite(pBt->pPage1->pDbPage);
      put4byte(&pBt->pPage1->aData[32], 0);
      put4byte(&pBt->pPage1->aData[36], 0);
      put4byte(&pBt->pPage1->aData[28], nFin);
      sqlite3PagerTruncateImage(pBt->pPager, nFin);
      pBt->nPage = nFin;
    }
    if( rc!=SQLITE_OK ){
      sqlite3PagerRollback(pPager);
    }
  }

  assert( nRef==sqlite3PagerRefcount(pPager) );

      rc = rc2;
    }

    /* The rollback may have destroyed the pPage1->aData value.  So
    ** call btreeGetPage() on page 1 again to make
    ** sure pPage1->aData is set correctly. */
    if( btreeGetPage(pBt, 1, &pPage1, 0)==SQLITE_OK ){
      int nPage = get4byte(28+(u8*)pPage1->aData);
      testcase( nPage==0 );
      if( nPage==0 ) sqlite3PagerPagecount(pBt->pPager, &nPage);
      testcase( pBt->nPage!=nPage );
      pBt->nPage = nPage;
      releasePage(pPage1);
    }
    assert( countWriteCursors(pBt)==0 );
    pBt->inTransaction = TRANS_READ;
  }

  btreeEndTransaction(p);

  int rc;
  BtShared *pBt = p->pBt;
  sqlite3BtreeEnter(p);
  assert( p->inTrans==TRANS_WRITE );
  assert( pBt->readOnly==0 );
  assert( iStatement>0 );
  assert( iStatement>p->db->nSavepoint );



  assert( pBt->inTransaction==TRANS_WRITE );
  /* At the pager level, a statement transaction is a savepoint with
  ** an index greater than all savepoints created explicitly using
  ** SQL statements. It is illegal to open, release or rollback any
  ** such savepoints while the statement transaction savepoint is active.
  */
  rc = sqlite3PagerOpenSavepoint(pBt->pPager, iStatement);

  sqlite3BtreeLeave(p);
  return rc;
}

/*
** The second argument to this function, op, is always SAVEPOINT_ROLLBACK
** or SAVEPOINT_RELEASE. This function either releases or rolls back the

  if( p && p->inTrans==TRANS_WRITE ){
    BtShared *pBt = p->pBt;
    assert( op==SAVEPOINT_RELEASE || op==SAVEPOINT_ROLLBACK );
    assert( iSavepoint>=0 || (iSavepoint==-1 && op==SAVEPOINT_ROLLBACK) );
    sqlite3BtreeEnter(p);
    rc = sqlite3PagerSavepoint(pBt->pPager, op, iSavepoint);
    if( rc==SQLITE_OK ){
      if( iSavepoint<0 && pBt->initiallyEmpty ) pBt->nPage = 0;
      rc = newDatabase(pBt);
      pBt->nPage = get4byte(28 + pBt->pPage1->aData);
      if( pBt->nPage==0 ){
        sqlite3PagerPagecount(pBt->pPager, (int*)&pBt->nPage);
      }
    }
    sqlite3BtreeLeave(p);
  }
  return rc;
}

/*

  assert( p->inTrans>TRANS_NONE );
  assert( wrFlag==0 || p->inTrans==TRANS_WRITE );
  assert( pBt->pPage1 && pBt->pPage1->aData );

  if( NEVER(wrFlag && pBt->readOnly) ){
    return SQLITE_READONLY;
  }
  if( iTable==1 && btreePagecount(pBt)==0 ){
    return SQLITE_EMPTY;
  }

  /* Now that no other errors can occur, finish filling in the BtCursor
  ** variables and link the cursor into the BtShared list.  */
  pCur->pgnoRoot = (Pgno)iTable;
  pCur->iPage = -1;

    Pgno iGuess = ovfl+1;
    u8 eType;

    while( PTRMAP_ISPAGE(pBt, iGuess) || iGuess==PENDING_BYTE_PAGE(pBt) ){
      iGuess++;
    }

    if( iGuess<=btreePagecount(pBt) ){
      rc = ptrmapGet(pBt, iGuess, &eType, &pgno);
      if( rc==SQLITE_OK && eType==PTRMAP_OVERFLOW2 && pgno==ovfl ){
        next = iGuess;
        rc = SQLITE_DONE;
      }
    }
  }

  assert( cursorHoldsMutex(pCur) );
  assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
  rc = moveToRoot(pCur);
  if( rc==SQLITE_OK ){
    if( pCur->eState==CURSOR_INVALID ){
      assert( pCur->apPage[pCur->iPage]->nCell==0 );
      *pRes = 1;

    }else{
      assert( pCur->apPage[pCur->iPage]->nCell>0 );
      *pRes = 0;
      rc = moveToLeftmost(pCur);
    }
  }
  return rc;

  u32 k;     /* Number of leaves on the trunk of the freelist */
  MemPage *pTrunk = 0;
  MemPage *pPrevTrunk = 0;
  Pgno mxPage;     /* Total size of the database file */

  assert( sqlite3_mutex_held(pBt->mutex) );
  pPage1 = pBt->pPage1;
  mxPage = btreePagecount(pBt);
  n = get4byte(&pPage1->aData[36]);
  testcase( n==mxPage-1 );
  if( n>=mxPage ){
    return SQLITE_CORRUPT_BKPT;
  }
  if( n>0 ){
    /* There are pages on the freelist.  Reuse one of those pages. */

      }
      releasePage(pPrevTrunk);
      pPrevTrunk = 0;
    }while( searchList );
  }else{
    /* There are no pages on the freelist, so create a new page at the
    ** end of the file */
    rc = sqlite3PagerWrite(pBt->pPage1->pDbPage);
    if( rc ) return rc;
    pBt->nPage++;
    if( pBt->nPage==PENDING_BYTE_PAGE(pBt) ) pBt->nPage++;



#ifndef SQLITE_OMIT_AUTOVACUUM
    if( pBt->autoVacuum && PTRMAP_ISPAGE(pBt, pBt->nPage) ){
      /* If *pPgno refers to a pointer-map page, allocate two new pages
      ** at the end of the file instead of one. The first allocated page
      ** becomes a new pointer-map page, the second is used by the caller.
      */
      MemPage *pPg = 0;
      TRACE(("ALLOCATE: %d from end of file (pointer-map page)\n", pBt->nPage));
      assert( pBt->nPage!=PENDING_BYTE_PAGE(pBt) );
      rc = btreeGetPage(pBt, pBt->nPage, &pPg, 1);
      if( rc==SQLITE_OK ){
        rc = sqlite3PagerWrite(pPg->pDbPage);
        releasePage(pPg);
      }
      if( rc ) return rc;
      pBt->nPage++;
      if( pBt->nPage==PENDING_BYTE_PAGE(pBt) ){ pBt->nPage++; }
    }
#endif
    put4byte(28 + (u8*)pBt->pPage1->aData, pBt->nPage);
    *pPgno = pBt->nPage;

    assert( *pPgno!=PENDING_BYTE_PAGE(pBt) );
    rc = btreeGetPage(pBt, *pPgno, ppPage, 1);
    if( rc ) return rc;
    rc = sqlite3PagerWrite((*ppPage)->pDbPage);
    if( rc!=SQLITE_OK ){
      releasePage(*ppPage);
    }
    TRACE(("ALLOCATE: %d from end of file\n", *pPgno));
  }

  assert( pBt->usableSize > 4 );
  ovflPageSize = pBt->usableSize - 4;
  nOvfl = (info.nPayload - info.nLocal + ovflPageSize - 1)/ovflPageSize;
  assert( ovflPgno==0 || nOvfl>0 );
  while( nOvfl-- ){
    Pgno iNext = 0;
    MemPage *pOvfl = 0;
    if( ovflPgno<2 || ovflPgno>btreePagecount(pBt) ){
      /* 0 is not a legal page number and page 1 cannot be an 
      ** overflow page. Therefore if ovflPgno<2 or past the end of the 
      ** file the database must be corrupt. */
      return SQLITE_CORRUPT_BKPT;
    }
    if( nOvfl ){
      rc = getOverflowPage(pBt, ovflPgno, &pOvfl, &iNext);

    /* Update the pointer-map and meta-data with the new root-page number. */
    ptrmapPut(pBt, pgnoRoot, PTRMAP_ROOTPAGE, 0, &rc);
    if( rc ){
      releasePage(pRoot);
      return rc;
    }

    /* When the new root page was allocated, page 1 was made writable in
    ** order either to increase the database filesize, or to decrement the
    ** freelist count.  Hence, the sqlite3BtreeUpdateMeta() call cannot fail.
    */
    assert( sqlite3PagerIswriteable(pBt->pPage1->pDbPage) );
    rc = sqlite3BtreeUpdateMeta(p, 4, pgnoRoot);
    if( NEVER(rc) ){
      releasePage(pRoot);
      return rc;
    }

  }else{
    rc = allocateBtreePage(pBt, &pRoot, &pgnoRoot, 1, 0);
    if( rc ) return rc;

){
  MemPage *pPage;
  int rc;
  unsigned char *pCell;
  int i;

  assert( sqlite3_mutex_held(pBt->mutex) );
  if( pgno>btreePagecount(pBt) ){
    return SQLITE_CORRUPT_BKPT;
  }

  rc = getAndInitPage(pBt, pgno, &pPage);
  if( rc ) return rc;
  for(i=0; i<pPage->nCell; i++){
    pCell = findCell(pPage, i);

  char zErr[100];

  sqlite3BtreeEnter(p);
  assert( p->inTrans>TRANS_NONE && pBt->inTransaction>TRANS_NONE );
  nRef = sqlite3PagerRefcount(pBt->pPager);
  sCheck.pBt = pBt;
  sCheck.pPager = pBt->pPager;
  sCheck.nPage = btreePagecount(sCheck.pBt);
  sCheck.mxErr = mxErr;
  sCheck.nErr = 0;
  sCheck.mallocFailed = 0;
  *pnErr = 0;
  if( sCheck.nPage==0 ){
    sqlite3BtreeLeave(p);
    return 0;

  assert( cursorHoldsMutex(pCur) );
  assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
  assert(!pCur->isIncrblobHandle);
  assert(!pCur->aOverflow);
  pCur->isIncrblobHandle = 1;
}
#endif

/*
** Set both the "read version" (single byte at byte offset 18) and 
** "write version" (single byte at byte offset 19) fields in the database
** header to iVersion.
*/
int sqlite3BtreeSetVersion(Btree *pBtree, int iVersion){
  BtShared *pBt = pBtree->pBt;
  int rc;                         /* Return code */
 
  assert( pBtree->inTrans==TRANS_NONE );
  assert( iVersion==1 || iVersion==2 );

  /* If setting the version fields to 1, do not automatically open the
  ** WAL connection, even if the version fields are currently set to 2.
  */
  pBt->doNotUseWAL = (u8)(iVersion==1);

  rc = sqlite3BtreeBeginTrans(pBtree, 0);
  if( rc==SQLITE_OK ){
    u8 *aData = pBt->pPage1->aData;
    if( aData[18]!=(u8)iVersion || aData[19]!=(u8)iVersion ){
      rc = sqlite3BtreeBeginTrans(pBtree, 2);
      if( rc==SQLITE_OK ){
        rc = sqlite3PagerWrite(pBt->pPage1->pDbPage);
        if( rc==SQLITE_OK ){
          aData[18] = (u8)iVersion;
          aData[19] = (u8)iVersion;
        }
      }
    }
  }

  pBt->doNotUseWAL = 0;
  return rc;
}

int sqlite3BtreeClose(Btree*);
int sqlite3BtreeSetCacheSize(Btree*,int);
int sqlite3BtreeSetSafetyLevel(Btree*,int,int);
int sqlite3BtreeSyncDisabled(Btree*);
int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix);
int sqlite3BtreeGetPageSize(Btree*);
int sqlite3BtreeMaxPageCount(Btree*,int);
u32 sqlite3BtreeLastPage(Btree*);
int sqlite3BtreeSecureDelete(Btree*,int);
int sqlite3BtreeGetReserve(Btree*);
int sqlite3BtreeSetAutoVacuum(Btree *, int);
int sqlite3BtreeGetAutoVacuum(Btree *);
int sqlite3BtreeBeginTrans(Btree*,int);
int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster);
int sqlite3BtreeCommitPhaseTwo(Btree*);

char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*);
struct Pager *sqlite3BtreePager(Btree*);

int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*);
void sqlite3BtreeCacheOverflow(BtCursor *);
void sqlite3BtreeClearCursor(BtCursor *);

int sqlite3BtreeSetVersion(Btree *pBt, int iVersion);

#ifndef NDEBUG
int sqlite3BtreeCursorIsValid(BtCursor*);
#endif

#ifndef SQLITE_OMIT_BTREECOUNT
int sqlite3BtreeCount(BtCursor *, i64 *);

  Pager *pPager;        /* The page cache */
  sqlite3 *db;          /* Database connection currently using this Btree */
  BtCursor *pCursor;    /* A list of all open cursors */
  MemPage *pPage1;      /* First page of the database */
  u8 readOnly;          /* True if the underlying file is readonly */
  u8 pageSizeFixed;     /* True if the page size can no longer be changed */
  u8 secureDelete;      /* True if secure_delete is enabled */
  u8 initiallyEmpty;    /* Database is empty at start of transaction */
#ifndef SQLITE_OMIT_AUTOVACUUM
  u8 autoVacuum;        /* True if auto-vacuum is enabled */
  u8 incrVacuum;        /* True if incr-vacuum is enabled */
#endif
  u16 pageSize;         /* Total number of bytes on a page */
  u16 usableSize;       /* Number of usable bytes on each page */
  u16 maxLocal;         /* Maximum local payload in non-LEAFDATA tables */
  u16 minLocal;         /* Minimum local payload in non-LEAFDATA tables */
  u16 maxLeaf;          /* Maximum local payload in a LEAFDATA table */
  u16 minLeaf;          /* Minimum local payload in a LEAFDATA table */
  u8 inTransaction;     /* Transaction state */
  u8 doNotUseWAL;       /* If true, do not open write-ahead-log file */
  int nTransaction;     /* Number of open transactions (read + write) */
  u32 nPage;            /* Number of pages in the database */
  void *pSchema;        /* Pointer to space allocated by sqlite3BtreeSchema() */
  void (*xFreeSchema)(void*);  /* Destructor for BtShared.pSchema */
  sqlite3_mutex *mutex; /* Non-recursive mutex required to access this struct */
  Bitvec *pHasContent;  /* Set of pages moved to free-list this transaction */
#ifndef SQLITE_OMIT_SHARED_CACHE
  int nRef;             /* Number of references to this structure */
  BtShared *pNext;      /* Next on a list of sharable BtShared structs */

    for(j=0, pTabCol=pTab->aCol; j<pTab->nCol; j++, pTabCol++){
      if( sqlite3StrICmp(zColName, pTabCol->zName)==0 ) break;
    }
    if( j>=pTab->nCol ){
      sqlite3ErrorMsg(pParse, "table %s has no column named %s",
        pTab->zName, zColName);
      pParse->checkSchema = 1;
      goto exit_create_index;
    }
    pIndex->aiColumn[i] = j;
    /* Justification of the ALWAYS(pListItem->pExpr->pColl):  Because of
    ** the way the "idxlist" non-terminal is constructed by the parser,
    ** if pListItem->pExpr is not null then either pListItem->pExpr->pColl
    ** must exist or else there must have been an OOM error.  But if there

** release or rollback an SQL savepoint. 
*/
void sqlite3Savepoint(Parse *pParse, int op, Token *pName){
  char *zName = sqlite3NameFromToken(pParse->db, pName);
  if( zName ){
    Vdbe *v = sqlite3GetVdbe(pParse);
#ifndef SQLITE_OMIT_AUTHORIZATION
    static const char * const az[] = { "BEGIN", "RELEASE", "ROLLBACK" };
    assert( !SAVEPOINT_BEGIN && SAVEPOINT_RELEASE==1 && SAVEPOINT_ROLLBACK==2 );
#endif
    if( !v || sqlite3AuthCheck(pParse, SQLITE_SAVEPOINT, az[op], zName, 0) ){
      sqlite3DbFree(pParse->db, zName);
      return;
    }
    sqlite3VdbeAddOp4(v, OP_Savepoint, op, 0, 0, zName, P4_DYNAMIC);

    }
    db->aDb[1].pBt = pBt;
    assert( db->aDb[1].pSchema );
    if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize, -1, 0) ){
      db->mallocFailed = 1;
      return 1;
    }

  }
  return 0;
}

/*
** Generate VDBE code that will verify the schema cookie and start
** a read-transaction for all named database files.

      pBest = p;
      bestScore = score;
    }
    p = p->pNext;
  }

  /* If no match is found, search the built-in functions.
  **
  ** If the SQLITE_PreferBuiltin flag is set, then search the built-in
  ** functions even if a prior app-defined function was found.  And give
  ** priority to built-in functions.
  **
  ** Except, if createFlag is true, that means that we are trying to
  ** install a new function.  Whatever FuncDef structure is returned will
  ** have fields overwritten with new information appropriate for the
  ** new function.  But the FuncDefs for built-in functions are read-only.
  ** So we must not search for built-ins when creating a new function.
  */ 
  if( !createFlag && (pBest==0 || (db->flags & SQLITE_PreferBuiltin)!=0) ){
    FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
    bestScore = 0;
    p = functionSearch(pHash, h, zName, nName);
    while( p ){
      int score = matchQuality(p, nArg, enc);
      if( score>bestScore ){
        pBest = p;
        bestScore = score;
      }

  "OMIT_AUTHORIZATION",
#endif
#ifdef SQLITE_OMIT_AUTOINCREMENT
  "OMIT_AUTOINCREMENT",
#endif
#ifdef SQLITE_OMIT_AUTOINIT
  "OMIT_AUTOINIT",
#endif
#ifdef SQLITE_OMIT_AUTOMATIC_INDEX
  "OMIT_AUTOMATIC_INDEX",
#endif
#ifdef SQLITE_OMIT_AUTOVACUUM
  "OMIT_AUTOVACUUM",
#endif
#ifdef SQLITE_OMIT_BETWEEN_OPTIMIZATION
  "OMIT_BETWEEN_OPTIMIZATION",
#endif

#endif
#ifdef SQLITE_OMIT_CAST
  "OMIT_CAST",
#endif
#ifdef SQLITE_OMIT_CHECK
  "OMIT_CHECK",
#endif
/* // redundant
** #ifdef SQLITE_OMIT_COMPILEOPTION_DIAGS
**   "OMIT_COMPILEOPTION_DIAGS",
** #endif
*/
#ifdef SQLITE_OMIT_COMPLETE
  "OMIT_COMPLETE",
#endif
#ifdef SQLITE_OMIT_COMPOUND_SELECT
  "OMIT_COMPOUND_SELECT",
#endif
#ifdef SQLITE_OMIT_DATETIME_FUNCS

#endif
#ifdef SQLITE_OMIT_FOREIGN_KEY
  "OMIT_FOREIGN_KEY",
#endif
#ifdef SQLITE_OMIT_GET_TABLE
  "OMIT_GET_TABLE",
#endif



#ifdef SQLITE_OMIT_INCRBLOB
  "OMIT_INCRBLOB",
#endif
#ifdef SQLITE_OMIT_INTEGRITY_CHECK
  "OMIT_INTEGRITY_CHECK",
#endif
#ifdef SQLITE_OMIT_LIKE_OPTIMIZATION

  "OMIT_VACUUM",
#endif
#ifdef SQLITE_OMIT_VIEW
  "OMIT_VIEW",
#endif
#ifdef SQLITE_OMIT_VIRTUALTABLE
  "OMIT_VIRTUALTABLE",
#endif
#ifdef SQLITE_OMIT_WAL
  "OMIT_WAL",
#endif
#ifdef SQLITE_OMIT_WSD
  "OMIT_WSD",
#endif
#ifdef SQLITE_OMIT_XFER_OPT
  "OMIT_XFER_OPT",
#endif

  return 0;
}

/*
** Set the time to the current time reported by the VFS
*/
static void setDateTimeToCurrent(sqlite3_context *context, DateTime *p){

  sqlite3 *db = sqlite3_context_db_handle(context);
  sqlite3OsCurrentTimeInt64(db->pVfs, &p->iJD);

  p->validJD = 1;
}

/*
** Attempt to parse the given string into a Julian Day Number.  Return
** the number of errors.
**

  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  time_t t;
  char *zFormat = (char *)sqlite3_user_data(context);
  sqlite3 *db;
  sqlite3_int64 iT;
  char zBuf[20];

  UNUSED_PARAMETER(argc);
  UNUSED_PARAMETER(argv);

  db = sqlite3_context_db_handle(context);
  sqlite3OsCurrentTimeInt64(db->pVfs, &iT);

  t = iT/1000 - 10000*(sqlite3_int64)21086676;






#ifdef HAVE_GMTIME_R
  {
    struct tm sNow;
    gmtime_r(&t, &sNow);
    strftime(zBuf, 20, zFormat, &sNow);
  }
#else

    pParse->nMem += (1 + pTab->nCol);

    /* Populate the OLD.* pseudo-table register array. These values will be 
    ** used by any BEFORE and AFTER triggers that exist.  */
    sqlite3VdbeAddOp2(v, OP_Copy, iRowid, iOld);
    for(iCol=0; iCol<pTab->nCol; iCol++){
      if( mask==0xffffffff || mask&(1<<iCol) ){


        sqlite3ExprCodeGetColumnOfTable(v, pTab, iCur, iCol, iOld+iCol+1);
      }
    }

    /* Invoke BEFORE DELETE trigger programs. */
    sqlite3CodeRowTrigger(pParse, pTrigger, 
        TK_DELETE, 0, TRIGGER_BEFORE, pTab, iOld, onconf, iLabel
    );

    }
  }

  if( eType==0 ){
    /* Could not found an existing table or index to use as the RHS b-tree.
    ** We will have to generate an ephemeral table to do the job.
    */
    double savedNQueryLoop = pParse->nQueryLoop;
    int rMayHaveNull = 0;
    eType = IN_INDEX_EPH;
    if( prNotFound ){
      *prNotFound = rMayHaveNull = ++pParse->nMem;
    }else{
      testcase( pParse->nQueryLoop>(double)1 );
      pParse->nQueryLoop = (double)1;
      if( pX->pLeft->iColumn<0 && !ExprHasAnyProperty(pX, EP_xIsSelect) ){
        eType = IN_INDEX_ROWID;
      }
    }
    sqlite3CodeSubselect(pParse, pX, rMayHaveNull, eType==IN_INDEX_ROWID);
    pParse->nQueryLoop = savedNQueryLoop;
  }else{
    pX->iTable = iTab;
  }
  return eType;
}
#endif

          return 0;
        }
        pEList = pExpr->x.pSelect->pEList;
        if( ALWAYS(pEList!=0 && pEList->nExpr>0) ){ 
          keyInfo.aColl[0] = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft,
              pEList->a[0].pExpr);
        }
      }else if( ALWAYS(pExpr->x.pList!=0) ){
        /* Case 2:     expr IN (exprlist)
        **
        ** For each expression, build an index key from the evaluation and
        ** store it in the temporary table. If <expr> is a column, then use
        ** that columns affinity when building index keys. If <expr> is not
        ** a column, use numeric affinity.
        */

    default: {
      /* If this has to be a scalar SELECT.  Generate code to put the
      ** value of this select in a memory cell and record the number
      ** of the memory cell in iColumn.  If this is an EXISTS, write
      ** an integer 0 (not exists) or 1 (exists) into a memory cell
      ** and record that memory cell in iColumn.
      */

      Select *pSel;                         /* SELECT statement to encode */
      SelectDest dest;                      /* How to deal with SELECt result */

      testcase( pExpr->op==TK_EXISTS );
      testcase( pExpr->op==TK_SELECT );
      assert( pExpr->op==TK_EXISTS || pExpr->op==TK_SELECT );

      assert( ExprHasProperty(pExpr, EP_xIsSelect) );
      pSel = pExpr->x.pSelect;
      sqlite3SelectDestInit(&dest, 0, ++pParse->nMem);
      if( pExpr->op==TK_SELECT ){
        dest.eDest = SRT_Mem;
        sqlite3VdbeAddOp2(v, OP_Null, 0, dest.iParm);
        VdbeComment((v, "Init subquery result"));
      }else{
        dest.eDest = SRT_Exists;
        sqlite3VdbeAddOp2(v, OP_Integer, 0, dest.iParm);
        VdbeComment((v, "Init EXISTS result"));
      }
      sqlite3ExprDelete(pParse->db, pSel->pLimit);
      pSel->pLimit = sqlite3PExpr(pParse, TK_INTEGER, 0, 0,
                                  &sqlite3IntTokens[1]);
      if( sqlite3Select(pParse, pSel, &dest) ){
        return 0;
      }
      rReg = dest.iParm;
      ExprSetIrreducible(pExpr);
      break;
    }

  affinity = comparisonAffinity(pExpr);

  /* Code the LHS, the <expr> from "<expr> IN (...)".
  */
  sqlite3ExprCachePush(pParse);
  r1 = sqlite3GetTempReg(pParse);
  sqlite3ExprCode(pParse, pExpr->pLeft, r1);

  /* If the LHS is NULL, then the result is either false or NULL depending
  ** on whether the RHS is empty or not, respectively.
  */
  if( destIfNull==destIfFalse ){
    /* Shortcut for the common case where the false and NULL outcomes are
    ** the same. */
    sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull);
  }else{
    int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1);
    sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse);
    sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull);
    sqlite3VdbeJumpHere(v, addr1);
  }

  if( eType==IN_INDEX_ROWID ){
    /* In this case, the RHS is the ROWID of table b-tree
    */
    sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse);
    sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1);
  }else{

  struct yColCache *p;
  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
    if( p->iReg==iReg ){
      p->tempReg = 0;
    }
  }
}

/*
** Generate code to extract the value of the iCol-th column of a table.
*/
void sqlite3ExprCodeGetColumnOfTable(
  Vdbe *v,        /* The VDBE under construction */
  Table *pTab,    /* The table containing the value */
  int iTabCur,    /* The cursor for this table */
  int iCol,       /* Index of the column to extract */
  int regOut      /* Extract the valud into this register */
){
  if( iCol<0 || iCol==pTab->iPKey ){
    sqlite3VdbeAddOp2(v, OP_Rowid, iTabCur, regOut);
  }else{
    int op = IsVirtual(pTab) ? OP_VColumn : OP_Column;
    sqlite3VdbeAddOp3(v, op, iTabCur, iCol, regOut);
  }
  if( iCol>=0 ){
    sqlite3ColumnDefault(v, pTab, iCol, regOut);
  }
}

/*
** Generate code that will extract the iColumn-th column from
** table pTab and store the column value in a register.  An effort
** is made to store the column value in register iReg, but this is
** not guaranteed.  The location of the column value is returned.
**

    if( p->iReg>0 && p->iTable==iTable && p->iColumn==iColumn ){
      p->lru = pParse->iCacheCnt++;
      sqlite3ExprCachePinRegister(pParse, p->iReg);
      return p->iReg;
    }
  }  
  assert( v!=0 );





  sqlite3ExprCodeGetColumnOfTable(v, pTab, iTable, iColumn, iReg);

  sqlite3ExprCacheStore(pParse, iTable, iColumn, iReg);
  return iReg;
}

/*
** Clear all column cache entries.
*/

      assert( z[n]=='\'' );
      zBlob = sqlite3HexToBlob(sqlite3VdbeDb(v), z, n);
      sqlite3VdbeAddOp4(v, OP_Blob, n/2, target, 0, zBlob, P4_DYNAMIC);
      break;
    }
#endif
    case TK_VARIABLE: {

      assert( !ExprHasProperty(pExpr, EP_IntValue) );
      assert( pExpr->u.zToken!=0 );
      assert( pExpr->u.zToken[0]!=0 );













      sqlite3VdbeAddOp2(v, OP_Variable, pExpr->iColumn, target);
      if( pExpr->u.zToken[1]!=0 ){
        sqlite3VdbeChangeP4(v, -1, pExpr->u.zToken, 0);

      }
      break;
    }
    case TK_REGISTER: {
      inReg = pExpr->iTable;
      break;
    }

** expressions are the same.  But if you get a 0 or 1 return, then you
** can be sure the expressions are the same.  In the places where
** this routine is used, it does not hurt to get an extra 2 - that
** just might result in some slightly slower code.  But returning
** an incorrect 0 or 1 could lead to a malfunction.
*/
int sqlite3ExprCompare(Expr *pA, Expr *pB){

  if( pA==0||pB==0 ){
    return pB==pA ? 0 : 2;
  }
  assert( !ExprHasAnyProperty(pA, EP_TokenOnly|EP_Reduced) );
  assert( !ExprHasAnyProperty(pB, EP_TokenOnly|EP_Reduced) );
  if( ExprHasProperty(pA, EP_xIsSelect) || ExprHasProperty(pB, EP_xIsSelect) ){
    return 2;
  }
  if( (pA->flags & EP_Distinct)!=(pB->flags & EP_Distinct) ) return 2;
  if( pA->op!=pB->op ) return 2;
  if( sqlite3ExprCompare(pA->pLeft, pB->pLeft) ) return 2;
  if( sqlite3ExprCompare(pA->pRight, pB->pRight) ) return 2;
  if( sqlite3ExprListCompare(pA->x.pList, pB->x.pList) ) return 2;











  if( pA->iTable!=pB->iTable || pA->iColumn!=pB->iColumn ) return 2;
  if( ExprHasProperty(pA, EP_IntValue) ){
    if( !ExprHasProperty(pB, EP_IntValue) || pA->u.iValue!=pB->u.iValue ){
      return 2;
    }
  }else if( pA->op!=TK_COLUMN && pA->u.zToken ){
    if( ExprHasProperty(pB, EP_IntValue) || NEVER(pB->u.zToken==0) ) return 2;
    if( sqlite3StrICmp(pA->u.zToken,pB->u.zToken)!=0 ){
      return 2;
    }
  }
  if( (pA->flags & EP_ExpCollate)!=(pB->flags & EP_ExpCollate) ) return 1;
  if( (pA->flags & EP_ExpCollate)!=0 && pA->pColl!=pB->pColl ) return 2;
  return 0;
}

/*
** Compare two ExprList objects.  Return 0 if they are identical and 
** non-zero if they differ in any way.
**
** This routine might return non-zero for equivalent ExprLists.  The
** only consequence will be disabled optimizations.  But this routine
** must never return 0 if the two ExprList objects are different, or
** a malfunction will result.
**
** Two NULL pointers are considered to be the same.  But a NULL pointer
** always differs from a non-NULL pointer.
*/
int sqlite3ExprListCompare(ExprList *pA, ExprList *pB){
  int i;
  if( pA==0 && pB==0 ) return 0;
  if( pA==0 || pB==0 ) return 1;
  if( pA->nExpr!=pB->nExpr ) return 1;
  for(i=0; i<pA->nExpr; i++){
    Expr *pExprA = pA->a[i].pExpr;
    Expr *pExprB = pB->a[i].pExpr;
    if( pA->a[i].sortOrder!=pB->a[i].sortOrder ) return 1;
    if( sqlite3ExprCompare(pExprA, pExprB) ) return 1;
  }
  return 0;
}

/*
** Add a new element to the pAggInfo->aCol[] array.  Return the index of
** the new element.  Return a negative number if malloc fails.
*/
static int addAggInfoColumn(sqlite3 *db, AggInfo *pInfo){
  int i;

      sqlite3_result_text(context, sqlite3StrAccumFinish(pAccum), -1, 
                          sqlite3_free);
    }
  }
}

/*
** This routine does per-connection function registration.  Most
** of the built-in functions above are part of the global function set.
** This routine only deals with those that are not global.
*/
void sqlite3RegisterBuiltinFunctions(sqlite3 *db){




  int rc = sqlite3_overload_function(db, "MATCH", 2);
  assert( rc==SQLITE_NOMEM || rc==SQLITE_OK );
  if( rc==SQLITE_NOMEM ){
    db->mallocFailed = 1;

  }
}

/*
** Set the LIKEOPT flag on the 2-argument function with the given name.
*/
static void setLikeOptFlag(sqlite3 *db, const char *zName, u8 flagVal){

  FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
  FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aBuiltinFunc);

  for(i=0; i<ArraySize(aBuiltinFunc); i++){
    sqlite3FuncDefInsert(pHash, &aFunc[i]);
  }
  sqlite3RegisterDateTimeFunctions();
#ifndef SQLITE_OMIT_ALTERTABLE
  sqlite3AlterFunctions();
#endif
}

/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
** read-only.
*/
SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;

/*
** Constant tokens for values 0 and 1.
*/
const Token sqlite3IntTokens[] = {
   { "0", 1 },
   { "1", 1 }
};


/*
** The value of the "pending" byte must be 0x40000000 (1 byte past the
** 1-gibabyte boundary) in a compatible database.  SQLite never uses
** the database page that contains the pending byte.  It never attempts
** to read or write that page.  The pending byte page is set assign
** for use by the VFS layers as space for managing file locks.
**
** During testing, it is often desirable to move the pending byte to
** a different position in the file.  This allows code that has to
** deal with the pending byte to run on files that are much smaller
** than 1 GiB.  The sqlite3_test_control() interface can be used to
** move the pending byte.
**
** IMPORTANT:  Changing the pending byte to any value other than
** 0x40000000 results in an incompatible database file format!
** Changing the pending byte during operating results in undefined
** and dileterious behavior.
*/
#ifndef SQLITE_OMIT_WSD
int sqlite3PendingByte = 0x40000000;
#endif

#include "opcodes.h"
/*
** Properties of opcodes.  The OPFLG_INITIALIZER macro is
** created by mkopcodeh.awk during compilation.  Data is obtained
** from the comments following the "case OP_xxxx:" statements in
** the vdbe.c file.  
*/
const unsigned char sqlite3OpcodeProperty[] = OPFLG_INITIALIZER;

      }
      if( j>=pTab->nCol ){
        if( sqlite3IsRowid(pColumn->a[i].zName) ){
          keyColumn = i;
        }else{
          sqlite3ErrorMsg(pParse, "table %S has no column named %s",
              pTabList, 0, pColumn->a[i].zName);
          pParse->checkSchema = 1;
          goto insert_cleanup;
        }
      }
    }
  }

  /* If there is no IDLIST term but the table has an integer primary

      if( pColumn==0 ){
        j = i;
      }else{
        for(j=0; j<pColumn->nId; j++){
          if( pColumn->a[j].idx==i ) break;
        }
      }
      if( (!useTempTable && !pList) || (pColumn && j>=pColumn->nId) ){
        sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, regCols+i+1);
      }else if( useTempTable ){
        sqlite3VdbeAddOp3(v, OP_Column, srcTab, j, regCols+i+1); 
      }else{
        assert( pSelect==0 ); /* Otherwise useTempTable is true */
        sqlite3ExprCodeAndCache(pParse, pList->a[j].pExpr, regCols+i+1);
      }

  jrnlSync,      /* xSync */
  jrnlFileSize,  /* xFileSize */
  0,             /* xLock */
  0,             /* xUnlock */
  0,             /* xCheckReservedLock */
  0,             /* xFileControl */
  0,             /* xSectorSize */
  0,             /* xDeviceCharacteristics */
  0,             /* xShmMap */
  0,             /* xShmLock */
  0,             /* xShmBarrier */
  0              /* xShmUnmap */
};

/* 
** Open a journal file.
*/
int sqlite3JournalOpen(
  sqlite3_vfs *pVfs,         /* The VFS to use for actual file I/O */

    /* SQLITE_READONLY    */ "attempt to write a readonly database",
    /* SQLITE_INTERRUPT   */ "interrupted",
    /* SQLITE_IOERR       */ "disk I/O error",
    /* SQLITE_CORRUPT     */ "database disk image is malformed",
    /* SQLITE_NOTFOUND    */ 0,
    /* SQLITE_FULL        */ "database or disk is full",
    /* SQLITE_CANTOPEN    */ "unable to open database file",
    /* SQLITE_PROTOCOL    */ "locking protocol",
    /* SQLITE_EMPTY       */ "table contains no data",
    /* SQLITE_SCHEMA      */ "database schema has changed",
    /* SQLITE_TOOBIG      */ "string or blob too big",
    /* SQLITE_CONSTRAINT  */ "constraint failed",
    /* SQLITE_MISMATCH    */ "datatype mismatch",
    /* SQLITE_MISUSE      */ "library routine called out of sequence",
    /* SQLITE_NOLFS       */ "large file support is disabled",

  pRet = db->pRollbackArg;
  db->xRollbackCallback = xCallback;
  db->pRollbackArg = pArg;
  sqlite3_mutex_leave(db->mutex);
  return pRet;
}

#ifndef SQLITE_OMIT_WAL
/*
** The sqlite3_wal_hook() callback registered by sqlite3_wal_autocheckpoint().
** Invoke sqlite3_wal_checkpoint if the number of frames in the log file
** is greater than sqlite3.pWalArg cast to an integer (the value configured by
** wal_autocheckpoint()).
*/ 
int sqlite3WalDefaultHook(
  void *pClientData,     /* Argument */
  sqlite3 *db,           /* Connection */
  const char *zDb,       /* Database */
  int nFrame             /* Size of WAL */
){
  if( nFrame>=SQLITE_PTR_TO_INT(pClientData) ){
    sqlite3BeginBenignMalloc();
    sqlite3_wal_checkpoint(db, zDb);
    sqlite3EndBenignMalloc();
  }
  return SQLITE_OK;
}
#endif /* SQLITE_OMIT_WAL */

/*
** Configure an sqlite3_wal_hook() callback to automatically checkpoint
** a database after committing a transaction if there are nFrame or
** more frames in the log file. Passing zero or a negative value as the
** nFrame parameter disables automatic checkpoints entirely.
**
** The callback registered by this function replaces any existing callback
** registered using sqlite3_wal_hook(). Likewise, registering a callback
** using sqlite3_wal_hook() disables the automatic checkpoint mechanism
** configured by this function.
*/
int sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){
#ifndef SQLITE_OMIT_WAL
  if( nFrame>0 ){
    sqlite3_wal_hook(db, sqlite3WalDefaultHook, SQLITE_INT_TO_PTR(nFrame));
  }else{
    sqlite3_wal_hook(db, 0, 0);
  }
#endif
  return SQLITE_OK;
}

/*
** Register a callback to be invoked each time a transaction is written
** into the write-ahead-log by this database connection.
*/
void *sqlite3_wal_hook(
  sqlite3 *db,                    /* Attach the hook to this db handle */
  int(*xCallback)(void *, sqlite3*, const char*, int),
  void *pArg                      /* First argument passed to xCallback() */
){
#ifndef SQLITE_OMIT_WAL
  void *pRet;
  sqlite3_mutex_enter(db->mutex);
  pRet = db->pWalArg;
  db->xWalCallback = xCallback;
  db->pWalArg = pArg;
  sqlite3_mutex_leave(db->mutex);
  return pRet;
#else
  return 0;
#endif
}


/*
** Checkpoint database zDb. If zDb is NULL, or if the buffer zDb points
** to contains a zero-length string, all attached databases are 
** checkpointed.
*/
int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){
#ifdef SQLITE_OMIT_WAL
  return SQLITE_OK;
#else
  int rc;                         /* Return code */
  int iDb = SQLITE_MAX_ATTACHED;  /* sqlite3.aDb[] index of db to checkpoint */

  sqlite3_mutex_enter(db->mutex);
  if( zDb && zDb[0] ){
    iDb = sqlite3FindDbName(db, zDb);
  }
  if( iDb<0 ){
    rc = SQLITE_ERROR;
    sqlite3Error(db, SQLITE_ERROR, "unknown database: %s", zDb);
  }else{
    rc = sqlite3Checkpoint(db, iDb);
    sqlite3Error(db, rc, 0);
  }
  rc = sqlite3ApiExit(db, rc);
  sqlite3_mutex_leave(db->mutex);
  return rc;
#endif
}

#ifndef SQLITE_OMIT_WAL
/*
** Run a checkpoint on database iDb. This is a no-op if database iDb is
** not currently open in WAL mode.
**
** If a transaction is open on the database being checkpointed, this 
** function returns SQLITE_LOCKED and a checkpoint is not attempted. If 
** an error occurs while running the checkpoint, an SQLite error code is 
** returned (i.e. SQLITE_IOERR). Otherwise, SQLITE_OK.
**
** The mutex on database handle db should be held by the caller. The mutex
** associated with the specific b-tree being checkpointed is taken by
** this function while the checkpoint is running.
**
** If iDb is passed SQLITE_MAX_ATTACHED, then all attached databases are
** checkpointed. If an error is encountered it is returned immediately -
** no attempt is made to checkpoint any remaining databases.
*/
int sqlite3Checkpoint(sqlite3 *db, int iDb){
  int rc = SQLITE_OK;             /* Return code */
  int i;                          /* Used to iterate through attached dbs */

  assert( sqlite3_mutex_held(db->mutex) );

  for(i=0; i<db->nDb && rc==SQLITE_OK; i++){
    if( i==iDb || iDb==SQLITE_MAX_ATTACHED ){
      Btree *pBt = db->aDb[i].pBt;
      if( pBt ){
        if( sqlite3BtreeIsInReadTrans(pBt) ){
          rc = SQLITE_LOCKED;
        }else{
          sqlite3BtreeEnter(pBt);
          rc = sqlite3PagerCheckpoint(sqlite3BtreePager(pBt));
          sqlite3BtreeLeave(pBt);
        }
      }
    }
  }

  return rc;
}
#endif /* SQLITE_OMIT_WAL */

/*
** This function returns true if main-memory should be used instead of
** a temporary file for transient pager files and statement journals.
** The value returned depends on the value of db->temp_store (runtime
** parameter) and the compile time value of SQLITE_TEMP_STORE. The
** following table describes the relationship between these two values
** and this functions return value.

  db->aDb = db->aDbStatic;

  assert( sizeof(db->aLimit)==sizeof(aHardLimit) );
  memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
  db->autoCommit = 1;
  db->nextAutovac = -1;
  db->nextPagesize = 0;
  db->flags |= SQLITE_ShortColNames | SQLITE_AutoIndex
#if SQLITE_DEFAULT_FILE_FORMAT<4
                 | SQLITE_LegacyFileFmt
#endif
#ifdef SQLITE_ENABLE_LOAD_EXTENSION
                 | SQLITE_LoadExtension
#endif
#if SQLITE_DEFAULT_RECURSIVE_TRIGGERS

  sqlite3PagerLockingMode(sqlite3BtreePager(db->aDb[0].pBt),
                          SQLITE_DEFAULT_LOCKING_MODE);
#endif

  /* Enable the lookaside-malloc subsystem */
  setupLookaside(db, 0, sqlite3GlobalConfig.szLookaside,
                        sqlite3GlobalConfig.nLookaside);

  sqlite3_wal_autocheckpoint(db, SQLITE_DEFAULT_WAL_AUTOCHECKPOINT);

opendb_out:
  if( db ){
    assert( db->mutex!=0 || isThreadsafe==0 || sqlite3GlobalConfig.bFullMutex==0 );
    sqlite3_mutex_leave(db->mutex);
  }
  rc = sqlite3_errcode(db);

  db->xCollNeeded16 = xCollNeeded16;
  db->pCollNeededArg = pCollNeededArg;
  sqlite3_mutex_leave(db->mutex);
  return SQLITE_OK;
}
#endif /* SQLITE_OMIT_UTF16 */


#ifndef SQLITE_OMIT_DEPRECATED
/*
** This function is now an anachronism. It used to be used to recover from a
** malloc() failure, but SQLite now does this automatically.
*/
int sqlite3_global_recover(void){
  return SQLITE_OK;
}

#endif

/*
** Test to see whether or not the database connection is in autocommit
** mode.  Return TRUE if it is and FALSE if not.  Autocommit mode is on
** by default.  Autocommit is disabled by a BEGIN statement and reenabled
** by the next COMMIT or ROLLBACK.

**
**   2.  Invoke sqlite3_log() to provide the source code location where
**       a low-level error is first detected.
*/
int sqlite3CorruptError(int lineno){
  testcase( sqlite3GlobalConfig.xLog!=0 );
  sqlite3_log(SQLITE_CORRUPT,
              "database corruption at line %d of [%.10s]",
              lineno, 20+sqlite3_sourceid());
  return SQLITE_CORRUPT;
}
int sqlite3MisuseError(int lineno){
  testcase( sqlite3GlobalConfig.xLog!=0 );
  sqlite3_log(SQLITE_MISUSE, 
              "misuse at line %d of [%.10s]",
              lineno, 20+sqlite3_sourceid());
  return SQLITE_MISUSE;
}
int sqlite3CantopenError(int lineno){
  testcase( sqlite3GlobalConfig.xLog!=0 );
  sqlite3_log(SQLITE_CANTOPEN, 
              "cannot open file at line %d of [%.10s]",
              lineno, 20+sqlite3_sourceid());
  return SQLITE_CANTOPEN;
}


#ifndef SQLITE_OMIT_DEPRECATED
/*
** This is a convenience routine that makes sure that all thread-specific

    **
    ** IMPORTANT:  Changing the PENDING byte from 0x40000000 results in
    ** an incompatible database file format.  Changing the PENDING byte
    ** while any database connection is open results in undefined and
    ** dileterious behavior.
    */
    case SQLITE_TESTCTRL_PENDING_BYTE: {
      rc = PENDING_BYTE;
#ifndef SQLITE_OMIT_WSD
      {
        unsigned int newVal = va_arg(ap, unsigned int);

        if( newVal ) sqlite3PendingByte = newVal;
      }
#endif
      break;
    }

    /*
    **  sqlite3_test_control(SQLITE_TESTCTRL_ASSERT, int X)
    **
    ** This action provides a run-time test to see whether or not

    case SQLITE_TESTCTRL_ISKEYWORD: {
      const char *zWord = va_arg(ap, const char*);
      int n = sqlite3Strlen30(zWord);
      rc = (sqlite3KeywordCode((u8*)zWord, n)!=TK_ID) ? SQLITE_N_KEYWORD : 0;
      break;
    }
#endif 

    /* sqlite3_test_control(SQLITE_TESTCTRL_PGHDRSZ)
    **
    ** Return the size of a pcache header in bytes.
    */
    case SQLITE_TESTCTRL_PGHDRSZ: {
      rc = sizeof(PgHdr);
      break;
    }

  }
  va_end(ap);
#endif /* SQLITE_OMIT_BUILTIN_TEST */
  return rc;
}

** embedded processor.
*/
void *sqlite3ScratchMalloc(int n){
  void *p;
  assert( n>0 );

#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
  /* Verify that no more than two scratch allocation per thread
  ** is outstanding at one time.  (This is only checked in the
  ** single-threaded case since checking in the multi-threaded case
  ** would be much more complicated.) */
  assert( scratchAllocOut<=1 );
#endif

  if( sqlite3GlobalConfig.szScratch<n ){
    goto scratch_overflow;
  }else{  
    sqlite3_mutex_enter(mem0.mutex);
    if( mem0.nScratchFree==0 ){

    sqlite3StatusSet(SQLITE_STATUS_SCRATCH_SIZE, n);
    n = mallocWithAlarm(n, &p);
    if( p ) sqlite3StatusAdd(SQLITE_STATUS_SCRATCH_OVERFLOW, n);
    sqlite3_mutex_leave(mem0.mutex);
  }else{
    p = sqlite3GlobalConfig.m.xMalloc(n);
  }
  sqlite3MemdebugSetType(p, MEMTYPE_SCRATCH);
#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
  scratchAllocOut = p!=0;
#endif
  return p;    
}
void sqlite3ScratchFree(void *p){
  if( p ){










    if( sqlite3GlobalConfig.pScratch==0
           || p<sqlite3GlobalConfig.pScratch
           || p>=(void*)mem0.aScratchFree ){
      assert( sqlite3MemdebugHasType(p, MEMTYPE_SCRATCH) );
      sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
      if( sqlite3GlobalConfig.bMemstat ){
        int iSize = sqlite3MallocSize(p);
        sqlite3_mutex_enter(mem0.mutex);
        sqlite3StatusAdd(SQLITE_STATUS_SCRATCH_OVERFLOW, -iSize);
        sqlite3StatusAdd(SQLITE_STATUS_MEMORY_USED, -iSize);
        sqlite3GlobalConfig.m.xFree(p);
        sqlite3_mutex_leave(mem0.mutex);
      }else{
        sqlite3GlobalConfig.m.xFree(p);
      }
    }else{
      int i;
      i = (int)((u8*)p - (u8*)sqlite3GlobalConfig.pScratch);
      i /= sqlite3GlobalConfig.szScratch;
      assert( i>=0 && i<sqlite3GlobalConfig.nScratch );
      sqlite3_mutex_enter(mem0.mutex);
      assert( mem0.nScratchFree<(u32)sqlite3GlobalConfig.nScratch );
      mem0.aScratchFree[mem0.nScratchFree++] = i;
      sqlite3StatusAdd(SQLITE_STATUS_SCRATCH_USED, -1);
      sqlite3_mutex_leave(mem0.mutex);

#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
    /* Verify that no more than two scratch allocation per thread
    ** is outstanding at one time.  (This is only checked in the
    ** single-threaded case since checking in the multi-threaded case
    ** would be much more complicated.) */
    assert( scratchAllocOut>=1 && scratchAllocOut<=2 );
    scratchAllocOut = 0;
#endif

    }
  }
}

/*
** TRUE if p is a lookaside memory allocation from db
*/
#ifndef SQLITE_OMIT_LOOKASIDE
static int isLookaside(sqlite3 *db, void *p){
  return db && p && p>=db->lookaside.pStart && p<db->lookaside.pEnd;
}
#else
#define isLookaside(A,B) 0
#endif

/*
** Return the size of a memory allocation previously obtained from
** sqlite3Malloc() or sqlite3_malloc().
*/
int sqlite3MallocSize(void *p){
  assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
  return sqlite3GlobalConfig.m.xSize(p);
}
int sqlite3DbMallocSize(sqlite3 *db, void *p){
  assert( db==0 || sqlite3_mutex_held(db->mutex) );
  if( isLookaside(db, p) ){
    return db->lookaside.sz;
  }else{
    assert( sqlite3MemdebugHasType(p,
             db ? (MEMTYPE_DB|MEMTYPE_HEAP) : MEMTYPE_HEAP) );
    return sqlite3GlobalConfig.m.xSize(p);
  }
}

/*
** Free memory previously obtained from sqlite3Malloc().
*/
void sqlite3_free(void *p){
  if( p==0 ) return;
  assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
  if( sqlite3GlobalConfig.bMemstat ){
    sqlite3_mutex_enter(mem0.mutex);
    sqlite3StatusAdd(SQLITE_STATUS_MEMORY_USED, -sqlite3MallocSize(p));
    sqlite3GlobalConfig.m.xFree(p);
    sqlite3_mutex_leave(mem0.mutex);
  }else{
    sqlite3GlobalConfig.m.xFree(p);

  assert( db==0 || sqlite3_mutex_held(db->mutex) );
  if( isLookaside(db, p) ){
    LookasideSlot *pBuf = (LookasideSlot*)p;
    pBuf->pNext = db->lookaside.pFree;
    db->lookaside.pFree = pBuf;
    db->lookaside.nOut--;
  }else{
    assert( sqlite3MemdebugHasType(p, MEMTYPE_DB|MEMTYPE_HEAP) );
    sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
    sqlite3_free(p);
  }
}

/*
** Change the size of an existing memory allocation
*/

  }else if( sqlite3GlobalConfig.bMemstat ){
    sqlite3_mutex_enter(mem0.mutex);
    sqlite3StatusSet(SQLITE_STATUS_MALLOC_SIZE, nBytes);
    if( sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED)+nNew-nOld >= 
          mem0.alarmThreshold ){
      sqlite3MallocAlarm(nNew-nOld);
    }
    assert( sqlite3MemdebugHasType(pOld, MEMTYPE_HEAP) );
    pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
    if( pNew==0 && mem0.alarmCallback ){
      sqlite3MallocAlarm(nBytes);
      pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
    }
    if( pNew ){
      nNew = sqlite3MallocSize(pNew);

    return 0;
  }
#endif
  p = sqlite3Malloc(n);
  if( !p && db ){
    db->mallocFailed = 1;
  }
  sqlite3MemdebugSetType(p,
            (db && db->lookaside.bEnabled) ? MEMTYPE_DB : MEMTYPE_HEAP);
  return p;
}

/*
** Resize the block of memory pointed to by p to n bytes. If the
** resize fails, set the mallocFailed flag in the connection object.
*/

      }
      pNew = sqlite3DbMallocRaw(db, n);
      if( pNew ){
        memcpy(pNew, p, db->lookaside.sz);
        sqlite3DbFree(db, p);
      }
    }else{
      assert( sqlite3MemdebugHasType(p, MEMTYPE_DB|MEMTYPE_HEAP) );
      sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
      pNew = sqlite3_realloc(p, n);
      if( !pNew ){
        db->mallocFailed = 1;
      }
      sqlite3MemdebugSetType(pNew,
            db->lookaside.bEnabled ? MEMTYPE_DB : MEMTYPE_HEAP);
    }
  }
  return pNew;
}

/*
** Attempt to reallocate p.  If the reallocation fails, then free p

** MemBlockHdr.
*/
struct MemBlockHdr {
  i64 iSize;                          /* Size of this allocation */
  struct MemBlockHdr *pNext, *pPrev;  /* Linked list of all unfreed memory */
  char nBacktrace;                    /* Number of backtraces on this alloc */
  char nBacktraceSlots;               /* Available backtrace slots */
  u8 nTitle;                          /* Bytes of title; includes '\0' */
  u8 eType;                           /* Allocation type code */
  int iForeGuard;                     /* Guard word for sanity */
};

/*
** Guard words
*/
#define FOREGUARD 0x80F5E153

    if( mem.pLast ){
      mem.pLast->pNext = pHdr;
    }else{
      mem.pFirst = pHdr;
    }
    mem.pLast = pHdr;
    pHdr->iForeGuard = FOREGUARD;
    pHdr->eType = MEMTYPE_HEAP;
    pHdr->nBacktraceSlots = mem.nBacktrace;
    pHdr->nTitle = mem.nTitle;
    if( mem.nBacktrace ){
      void *aAddr[40];
      pHdr->nBacktrace = backtrace(aAddr, mem.nBacktrace+1)-1;
      memcpy(pBt, &aAddr[1], pHdr->nBacktrace*sizeof(void*));
      assert(pBt[0]);

     sqlite3MemRoundup,
     sqlite3MemInit,
     sqlite3MemShutdown,
     0
  };
  sqlite3_config(SQLITE_CONFIG_MALLOC, &defaultMethods);
}

/*
** Set the "type" of an allocation.
*/
void sqlite3MemdebugSetType(void *p, u8 eType){
  if( p ){
    struct MemBlockHdr *pHdr;
    pHdr = sqlite3MemsysGetHeader(p);
    assert( pHdr->iForeGuard==FOREGUARD );
    pHdr->eType = eType;
  }
}

/*
** Return TRUE if the mask of type in eType matches the type of the
** allocation p.  Also return true if p==NULL.
**
** This routine is designed for use within an assert() statement, to
** verify the type of an allocation.  For example:
**
**     assert( sqlite3MemdebugHasType(p, MEMTYPE_DB) );
*/
int sqlite3MemdebugHasType(void *p, u8 eType){
  int rc = 1;
  if( p ){
    struct MemBlockHdr *pHdr;
    pHdr = sqlite3MemsysGetHeader(p);
    assert( pHdr->iForeGuard==FOREGUARD );         /* Allocation is valid */
    assert( (pHdr->eType & (pHdr->eType-1))==0 );  /* Only one type bit set */
    if( (pHdr->eType&eType)==0 ){
      void **pBt;
      pBt = (void**)pHdr;
      pBt -= pHdr->nBacktraceSlots;
      backtrace_symbols_fd(pBt, pHdr->nBacktrace, fileno(stderr));
      fprintf(stderr, "\n");
      rc = 0;
    }
  }
  return rc;
}
 

/*
** Set the number of backtrace levels kept for each allocation.
** A value of zero turns off backtracing.  The number is always rounded
** up to a multiple of 2.
*/
void sqlite3MemdebugBacktrace(int depth){

** Sync the file.
**
** Syncing an in-memory journal is a no-op.  And, in fact, this routine
** is never called in a working implementation.  This implementation
** exists purely as a contingency, in case some malfunction in some other
** part of SQLite causes Sync to be called by mistake.
*/
static int memjrnlSync(sqlite3_file *NotUsed, int NotUsed2){
  UNUSED_PARAMETER2(NotUsed, NotUsed2);

  return SQLITE_OK;

}

/*
** Query the size of the file in bytes.
*/
static int memjrnlFileSize(sqlite3_file *pJfd, sqlite_int64 *pSize){
  MemJournal *p = (MemJournal *)pJfd;
  *pSize = (sqlite_int64) p->endpoint.iOffset;
  return SQLITE_OK;
}

/*
** Table of methods for MemJournal sqlite3_file object.
*/
static const struct sqlite3_io_methods MemJournalMethods = {
  1,                /* iVersion */
  memjrnlClose,     /* xClose */
  memjrnlRead,      /* xRead */
  memjrnlWrite,     /* xWrite */
  memjrnlTruncate,  /* xTruncate */
  memjrnlSync,      /* xSync */
  memjrnlFileSize,  /* xFileSize */
  0,                /* xLock */
  0,                /* xUnlock */
  0,                /* xCheckReservedLock */
  0,                /* xFileControl */
  0,                /* xSectorSize */
  0,                /* xDeviceCharacteristics */
  0,                /* xShmMap */
  0,                /* xShmLock */
  0,                /* xShmBarrier */
  0                 /* xShmUnlock */
};

/* 
** Open a journal file.
*/
void sqlite3MemJournalOpen(sqlite3_file *pJfd){
  MemJournal *p = (MemJournal *)pJfd;
  assert( EIGHT_BYTE_ALIGNMENT(p) );
  memset(p, 0, sqlite3MemJournalSize());
  p->pMethod = (sqlite3_io_methods*)&MemJournalMethods;
}

/*
** Return true if the file-handle passed as an argument is 
** an in-memory journal 
*/
int sqlite3IsMemJournal(sqlite3_file *pJfd){

#ifndef SQLITE_MUTEX_OMIT
/*
** Initialize the mutex system.
*/
int sqlite3MutexInit(void){ 
  int rc = SQLITE_OK;

  if( !sqlite3GlobalConfig.mutex.xMutexAlloc ){
    /* If the xMutexAlloc method has not been set, then the user did not
    ** install a mutex implementation via sqlite3_config() prior to 
    ** sqlite3_initialize() being called. This block copies pointers to
    ** the default implementation into the sqlite3GlobalConfig structure.
    */
    sqlite3_mutex_methods const *pFrom;
    sqlite3_mutex_methods *pTo = &sqlite3GlobalConfig.mutex;

    if( sqlite3GlobalConfig.bCoreMutex ){
      pFrom = sqlite3DefaultMutex();
    }else{
      pFrom = sqlite3NoopMutex();
    }
    memcpy(pTo, pFrom, offsetof(sqlite3_mutex_methods, xMutexAlloc));
    memcpy(&pTo->xMutexFree, &pFrom->xMutexFree,
           sizeof(*pTo) - offsetof(sqlite3_mutex_methods, xMutexFree));
    pTo->xMutexAlloc = pFrom->xMutexAlloc;
  }
  rc = sqlite3GlobalConfig.mutex.xMutexInit();


#ifdef SQLITE_DEBUG
  GLOBAL(int, mutexIsInit) = 1;
#endif

  return rc;
}

**
** If compiled with SQLITE_DEBUG, then additional logic is inserted
** that does error checking on mutexes to make sure they are being
** called correctly.
*/
#include "sqliteInt.h"

#ifndef SQLITE_MUTEX_OMIT

#ifndef SQLITE_DEBUG
/*
** Stub routines for all mutex methods.
**
** This routines provide no mutual exclusion or error checking.
*/


static int noopMutexInit(void){ return SQLITE_OK; }
static int noopMutexEnd(void){ return SQLITE_OK; }
static sqlite3_mutex *noopMutexAlloc(int id){ 
  UNUSED_PARAMETER(id);
  return (sqlite3_mutex*)8; 
}
static void noopMutexFree(sqlite3_mutex *p){ UNUSED_PARAMETER(p); return; }
static void noopMutexEnter(sqlite3_mutex *p){ UNUSED_PARAMETER(p); return; }
static int noopMutexTry(sqlite3_mutex *p){
  UNUSED_PARAMETER(p);
  return SQLITE_OK;
}
static void noopMutexLeave(sqlite3_mutex *p){ UNUSED_PARAMETER(p); return; }

sqlite3_mutex_methods const *sqlite3NoopMutex(void){
  static const sqlite3_mutex_methods sMutex = {
    noopMutexInit,
    noopMutexEnd,
    noopMutexAlloc,
    noopMutexFree,
    noopMutexEnter,
    noopMutexTry,
    noopMutexLeave,



    0,
    0,
  };

  return &sMutex;
}
#endif /* !SQLITE_DEBUG */

#ifdef SQLITE_DEBUG
/*
** In this implementation, error checking is provided for testing
** and debugging purposes.  The mutexes still do not provide any
** mutual exclusion.
*/

/*
** The mutex object
*/
typedef struct sqlite3_debug_mutex {
  int id;     /* The mutex type */
  int cnt;    /* Number of entries without a matching leave */
} sqlite3_debug_mutex;

/*
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
** intended for use inside assert() statements.
*/
static int debugMutexHeld(sqlite3_mutex *pX){
  sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
  return p==0 || p->cnt>0;
}
static int debugMutexNotheld(sqlite3_mutex *pX){
  sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
  return p==0 || p->cnt==0;
}

/*
** Initialize and deinitialize the mutex subsystem.
*/
static int debugMutexInit(void){ return SQLITE_OK; }
static int debugMutexEnd(void){ return SQLITE_OK; }

/*
** The sqlite3_mutex_alloc() routine allocates a new
** mutex and returns a pointer to it.  If it returns NULL
** that means that a mutex could not be allocated. 
*/
static sqlite3_mutex *debugMutexAlloc(int id){
  static sqlite3_debug_mutex aStatic[6];
  sqlite3_debug_mutex *pNew = 0;
  switch( id ){
    case SQLITE_MUTEX_FAST:
    case SQLITE_MUTEX_RECURSIVE: {
      pNew = sqlite3Malloc(sizeof(*pNew));
      if( pNew ){
        pNew->id = id;
        pNew->cnt = 0;
      }
      break;
    }
    default: {
      assert( id-2 >= 0 );
      assert( id-2 < (int)(sizeof(aStatic)/sizeof(aStatic[0])) );
      pNew = &aStatic[id-2];
      pNew->id = id;
      break;
    }
  }
  return (sqlite3_mutex*)pNew;
}

/*
** This routine deallocates a previously allocated mutex.
*/
static void debugMutexFree(sqlite3_mutex *pX){
  sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
  assert( p->cnt==0 );
  assert( p->id==SQLITE_MUTEX_FAST || p->id==SQLITE_MUTEX_RECURSIVE );
  sqlite3_free(p);
}

/*
** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
** to enter a mutex.  If another thread is already within the mutex,
** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
** SQLITE_BUSY.  The sqlite3_mutex_try() interface returns SQLITE_OK
** upon successful entry.  Mutexes created using SQLITE_MUTEX_RECURSIVE can
** be entered multiple times by the same thread.  In such cases the,
** mutex must be exited an equal number of times before another thread
** can enter.  If the same thread tries to enter any other kind of mutex
** more than once, the behavior is undefined.
*/
static void debugMutexEnter(sqlite3_mutex *pX){
  sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
  assert( p->id==SQLITE_MUTEX_RECURSIVE || debugMutexNotheld(pX) );
  p->cnt++;
}
static int debugMutexTry(sqlite3_mutex *pX){
  sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
  assert( p->id==SQLITE_MUTEX_RECURSIVE || debugMutexNotheld(pX) );
  p->cnt++;
  return SQLITE_OK;
}

/*
** The sqlite3_mutex_leave() routine exits a mutex that was
** previously entered by the same thread.  The behavior
** is undefined if the mutex is not currently entered or
** is not currently allocated.  SQLite will never do either.
*/
static void debugMutexLeave(sqlite3_mutex *pX){
  sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
  assert( debugMutexHeld(pX) );
  p->cnt--;
  assert( p->id==SQLITE_MUTEX_RECURSIVE || debugMutexNotheld(pX) );
}

sqlite3_mutex_methods const *sqlite3NoopMutex(void){
  static const sqlite3_mutex_methods sMutex = {
    debugMutexInit,
    debugMutexEnd,
    debugMutexAlloc,
    debugMutexFree,
    debugMutexEnter,
    debugMutexTry,
    debugMutexLeave,

    debugMutexHeld,
    debugMutexNotheld
  };

  return &sMutex;
}
#endif /* SQLITE_DEBUG */

/*
** If compiled with SQLITE_MUTEX_NOOP, then the no-op mutex implementation
** is used regardless of the run-time threadsafety setting.
*/
#ifdef SQLITE_MUTEX_NOOP
sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
  return sqlite3NoopMutex();
}
#endif /* SQLITE_MUTEX_NOOP */
#endif /* SQLITE_MUTEX_OMIT */

  DosQueryMutexSem(p->mutex, &holder1, &tid, &holder2);
  assert( p->owner==tid );
  p->nRef--;
  assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE );
  DosReleaseMutexSem(p->mutex);
}

sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
  static const sqlite3_mutex_methods sMutex = {
    os2MutexInit,
    os2MutexEnd,
    os2MutexAlloc,
    os2MutexFree,
    os2MutexEnter,
    os2MutexTry,
    os2MutexLeave,

** Note that this implementation requires a version of pthreads that
** supports recursive mutexes.
*/
#ifdef SQLITE_MUTEX_PTHREADS

#include <pthread.h>

/*
** The sqlite3_mutex.id, sqlite3_mutex.nRef, and sqlite3_mutex.owner fields
** are necessary under two condidtions:  (1) Debug builds and (2) using
** home-grown mutexes.  Encapsulate these conditions into a single #define.
*/
#if defined(SQLITE_DEBUG) || defined(SQLITE_HOMEGROWN_RECURSIVE_MUTEX)
# define SQLITE_MUTEX_NREF 1
#else
# define SQLITE_MUTEX_NREF 0
#endif

/*
** Each recursive mutex is an instance of the following structure.
*/
struct sqlite3_mutex {
  pthread_mutex_t mutex;     /* Mutex controlling the lock */
#if SQLITE_MUTEX_NREF
  int id;                    /* Mutex type */
  volatile int nRef;         /* Number of entrances */
  volatile pthread_t owner;  /* Thread that is within this mutex */

  int trace;                 /* True to trace changes */
#endif
};
#if SQLITE_MUTEX_NREF
#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER, 0, 0, (pthread_t)0, 0 }
#else
#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER }
#endif

/*
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
** intended for use only inside assert() statements.  On some platforms,
** there might be race conditions that can cause these routines to
** deliver incorrect results.  In particular, if pthread_equal() is

        /* Use a recursive mutex if it is available */
        pthread_mutexattr_t recursiveAttr;
        pthread_mutexattr_init(&recursiveAttr);
        pthread_mutexattr_settype(&recursiveAttr, PTHREAD_MUTEX_RECURSIVE);
        pthread_mutex_init(&p->mutex, &recursiveAttr);
        pthread_mutexattr_destroy(&recursiveAttr);
#endif
#if SQLITE_MUTEX_NREF
        p->id = iType;
#endif
      }
      break;
    }
    case SQLITE_MUTEX_FAST: {
      p = sqlite3MallocZero( sizeof(*p) );
      if( p ){
#if SQLITE_MUTEX_NREF
        p->id = iType;
#endif
        pthread_mutex_init(&p->mutex, 0);
      }
      break;
    }
    default: {
      assert( iType-2 >= 0 );
      assert( iType-2 < ArraySize(staticMutexes) );
      p = &staticMutexes[iType-2];
#if SQLITE_MUTEX_NREF
      p->id = iType;
#endif
      break;
    }
  }
  return p;
}

      p->nRef = 1;
    }
  }
#else
  /* Use the built-in recursive mutexes if they are available.
  */
  pthread_mutex_lock(&p->mutex);
#if SQLITE_MUTEX_NREF
  p->owner = pthread_self();
  p->nRef++;
#endif
#endif

#ifdef SQLITE_DEBUG
  if( p->trace ){
    printf("enter mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
  }
#endif

      rc = SQLITE_BUSY;
    }
  }
#else
  /* Use the built-in recursive mutexes if they are available.
  */
  if( pthread_mutex_trylock(&p->mutex)==0 ){
#if SQLITE_MUTEX_NREF
    p->owner = pthread_self();
    p->nRef++;
#endif
    rc = SQLITE_OK;
  }else{
    rc = SQLITE_BUSY;
  }
#endif

#ifdef SQLITE_DEBUG

** The sqlite3_mutex_leave() routine exits a mutex that was
** previously entered by the same thread.  The behavior
** is undefined if the mutex is not currently entered or
** is not currently allocated.  SQLite will never do either.
*/
static void pthreadMutexLeave(sqlite3_mutex *p){
  assert( pthreadMutexHeld(p) );
#if SQLITE_MUTEX_NREF
  p->nRef--;
#endif
  assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE );

#ifdef SQLITE_HOMEGROWN_RECURSIVE_MUTEX
  if( p->nRef==0 ){
    pthread_mutex_unlock(&p->mutex);
  }
#else
  pthread_mutex_unlock(&p->mutex);
#endif

#ifdef SQLITE_DEBUG
  if( p->trace ){
    printf("leave mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
  }
#endif
}

sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
  static const sqlite3_mutex_methods sMutex = {
    pthreadMutexInit,
    pthreadMutexEnd,
    pthreadMutexAlloc,
    pthreadMutexFree,
    pthreadMutexEnter,
    pthreadMutexTry,
    pthreadMutexLeave,

/*
** Each recursive mutex is an instance of the following structure.
*/
struct sqlite3_mutex {
  CRITICAL_SECTION mutex;    /* Mutex controlling the lock */
  int id;                    /* Mutex type */


#ifdef SQLITE_DEBUG
  volatile int nRef;         /* Number of enterances */
  volatile DWORD owner;      /* Thread holding this mutex */
  int trace;                 /* True to trace changes */
#endif
};
#define SQLITE_W32_MUTEX_INITIALIZER { 0 }
#ifdef SQLITE_DEBUG
#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, 0L, (DWORD)0, 0 }
#else
#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 }
#endif

/*
** Return true (non-zero) if we are running under WinNT, Win2K, WinXP,
** or WinCE.  Return false (zero) for Win95, Win98, or WinME.
**
** Here is an interesting observation:  Win95, Win98, and WinME lack

  sqlite3_mutex *p;

  switch( iType ){
    case SQLITE_MUTEX_FAST:
    case SQLITE_MUTEX_RECURSIVE: {
      p = sqlite3MallocZero( sizeof(*p) );
      if( p ){  
#ifdef SQLITE_DEBUG
        p->id = iType;
#endif
        InitializeCriticalSection(&p->mutex);
      }
      break;
    }
    default: {
      assert( winMutex_isInit==1 );
      assert( iType-2 >= 0 );
      assert( iType-2 < ArraySize(winMutex_staticMutexes) );
      p = &winMutex_staticMutexes[iType-2];
#ifdef SQLITE_DEBUG
      p->id = iType;
#endif
      break;
    }
  }
  return p;
}

** upon successful entry.  Mutexes created using SQLITE_MUTEX_RECURSIVE can
** be entered multiple times by the same thread.  In such cases the,
** mutex must be exited an equal number of times before another thread
** can enter.  If the same thread tries to enter any other kind of mutex
** more than once, the behavior is undefined.
*/
static void winMutexEnter(sqlite3_mutex *p){
#ifdef SQLITE_DEBUG
  DWORD tid = GetCurrentThreadId(); 
  assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld2(p, tid) );
#endif
  EnterCriticalSection(&p->mutex);
#ifdef SQLITE_DEBUG
  p->owner = tid; 
  p->nRef++;

  if( p->trace ){
    printf("enter mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
  }
#endif
}
static int winMutexTry(sqlite3_mutex *p){
#ifndef NDEBUG

** previously entered by the same thread.  The behavior
** is undefined if the mutex is not currently entered or
** is not currently allocated.  SQLite will never do either.
*/
static void winMutexLeave(sqlite3_mutex *p){
#ifndef NDEBUG
  DWORD tid = GetCurrentThreadId();

  assert( p->nRef>0 );
  assert( p->owner==tid );
  p->nRef--;
  assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE );
#endif
  LeaveCriticalSection(&p->mutex);
#ifdef SQLITE_DEBUG
  if( p->trace ){
    printf("leave mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
  }
#endif
}

sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
  static const sqlite3_mutex_methods sMutex = {
    winMutexInit,
    winMutexEnd,
    winMutexAlloc,
    winMutexFree,
    winMutexEnter,
    winMutexTry,
    winMutexLeave,

  int rc = SQLITE_OK;

  sqlite3_mutex_enter(db->mutex);
  enterMutex();

  if( xNotify==0 ){
    removeFromBlockedList(db);
    db->pBlockingConnection = 0;
    db->pUnlockConnection = 0;
    db->xUnlockNotify = 0;
    db->pUnlockArg = 0;
  }else if( 0==db->pBlockingConnection ){
    /* The blocking transaction has been concluded. Or there never was a 
    ** blocking transaction. In either case, invoke the notify callback
    ** immediately. 

**     sqlite3OsOpen()
**     sqlite3OsRead()
**     sqlite3OsWrite()
**     sqlite3OsSync()
**     sqlite3OsLock()
**
*/
#if defined(SQLITE_TEST)
int sqlite3_memdebug_vfs_oom_test = 1;
  #define DO_OS_MALLOC_TEST(x)                                       \
  if (sqlite3_memdebug_vfs_oom_test && (!x || !sqlite3IsMemJournal(x))) {  \
    void *pTstAlloc = sqlite3Malloc(10);                             \
    if (!pTstAlloc) return SQLITE_IOERR_NOMEM;                       \
    sqlite3_free(pTstAlloc);                                         \
  }
#else
  #define DO_OS_MALLOC_TEST(x)
#endif

int sqlite3OsSectorSize(sqlite3_file *id){
  int (*xSectorSize)(sqlite3_file*) = id->pMethods->xSectorSize;
  return (xSectorSize ? xSectorSize(id) : SQLITE_DEFAULT_SECTOR_SIZE);
}
int sqlite3OsDeviceCharacteristics(sqlite3_file *id){
  return id->pMethods->xDeviceCharacteristics(id);
}
int sqlite3OsShmLock(sqlite3_file *id, int offset, int n, int flags){
  return id->pMethods->xShmLock(id, offset, n, flags);
}
void sqlite3OsShmBarrier(sqlite3_file *id){
  id->pMethods->xShmBarrier(id);
}
int sqlite3OsShmUnmap(sqlite3_file *id, int deleteFlag){
  return id->pMethods->xShmUnmap(id, deleteFlag);
}
int sqlite3OsShmMap(
  sqlite3_file *id,               /* Database file handle */
  int iPage,
  int pgsz,
  int bExtend,                    /* True to extend file if necessary */
  void volatile **pp              /* OUT: Pointer to mapping */
){
  return id->pMethods->xShmMap(id, iPage, pgsz, bExtend, pp);
}

/*
** The next group of routines are convenience wrappers around the
** VFS methods.
*/
int sqlite3OsOpen(
  sqlite3_vfs *pVfs, 
  const char *zPath, 
  sqlite3_file *pFile, 
  int flags, 
  int *pFlagsOut
){
  int rc;
  DO_OS_MALLOC_TEST(0);
  /* 0x87f3f is a mask of SQLITE_OPEN_ flags that are valid to be passed
  ** down into the VFS layer.  Some SQLITE_OPEN_ flags (for example,
  ** SQLITE_OPEN_FULLMUTEX or SQLITE_OPEN_SHAREDCACHE) are blocked before
  ** reaching the VFS. */
  rc = pVfs->xOpen(pVfs, zPath, pFile, flags & 0x87f3f, pFlagsOut);
  assert( rc==SQLITE_OK || pFile->pMethods==0 );
  return rc;
}
int sqlite3OsDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){
  return pVfs->xDelete(pVfs, zPath, dirSync);
}
int sqlite3OsAccess(

#endif /* SQLITE_OMIT_LOAD_EXTENSION */
int sqlite3OsRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){
  return pVfs->xRandomness(pVfs, nByte, zBufOut);
}
int sqlite3OsSleep(sqlite3_vfs *pVfs, int nMicro){
  return pVfs->xSleep(pVfs, nMicro);
}
int sqlite3OsCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *pTimeOut){
  int rc;
  if( pVfs->iVersion>=2 && pVfs->xCurrentTimeInt64 ){
    rc = pVfs->xCurrentTimeInt64(pVfs, pTimeOut);
  }else{
    double r;
    rc = pVfs->xCurrentTime(pVfs, &r);
    *pTimeOut = (sqlite3_int64)(r*86400000.0);
  }
  return rc;
}

int sqlite3OsOpenMalloc(
  sqlite3_vfs *pVfs, 
  const char *zFile, 
  sqlite3_file **ppFile, 
  int flags,

** Changing the value of PENDING_BYTE results in a subtly incompatible
** file format.  Depending on how it is changed, you might not notice
** the incompatibility right away, even running a full regression test.
** The default location of PENDING_BYTE is the first byte past the
** 1GB boundary.
**
*/
#ifdef SQLITE_OMIT_WSD
# define PENDING_BYTE     (0x40000000)
#else
# define PENDING_BYTE      sqlite3PendingByte
#endif
#define RESERVED_BYTE     (PENDING_BYTE+1)
#define SHARED_FIRST      (PENDING_BYTE+2)
#define SHARED_SIZE       510

/*
** Wrapper around OS specific sqlite3_os_init() function.
*/

int sqlite3OsLock(sqlite3_file*, int);
int sqlite3OsUnlock(sqlite3_file*, int);
int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut);
int sqlite3OsFileControl(sqlite3_file*,int,void*);
#define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0
int sqlite3OsSectorSize(sqlite3_file *id);
int sqlite3OsDeviceCharacteristics(sqlite3_file *id);
int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **);
int sqlite3OsShmLock(sqlite3_file *id, int, int, int);
void sqlite3OsShmBarrier(sqlite3_file *id);
int sqlite3OsShmUnmap(sqlite3_file *id, int);

/* 
** Functions for accessing sqlite3_vfs methods 
*/
int sqlite3OsOpen(sqlite3_vfs *, const char *, sqlite3_file*, int, int *);
int sqlite3OsDelete(sqlite3_vfs *, const char *, int);
int sqlite3OsAccess(sqlite3_vfs *, const char *, int, int *pResOut);
int sqlite3OsFullPathname(sqlite3_vfs *, const char *, int, char *);
#ifndef SQLITE_OMIT_LOAD_EXTENSION
void *sqlite3OsDlOpen(sqlite3_vfs *, const char *);
void sqlite3OsDlError(sqlite3_vfs *, int, char *);
void (*sqlite3OsDlSym(sqlite3_vfs *, void *, const char *))(void);
void sqlite3OsDlClose(sqlite3_vfs *, void *);
#endif /* SQLITE_OMIT_LOAD_EXTENSION */
int sqlite3OsRandomness(sqlite3_vfs *, int, char *);
int sqlite3OsSleep(sqlite3_vfs *, int);
int sqlite3OsCurrentTimeInt64(sqlite3_vfs *, sqlite3_int64*);

/*
** Convenience functions for opening and closing files using 
** sqlite3_malloc() to obtain space for the file-handle structure.
*/
int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*);
int sqlite3OsCloseFree(sqlite3_file *);

#endif /* _SQLITE_OS_H_ */

*/
#ifdef MEMORY_DEBUG
# error "The MEMORY_DEBUG macro is obsolete.  Use SQLITE_DEBUG instead."
#endif

#ifdef SQLITE_DEBUG
int sqlite3OSTrace = 0;
#define OSTRACE(X)          if( sqlite3OSTrace ) sqlite3DebugPrintf X








#else






#define OSTRACE(X)
#endif

/*
** Macros for performance tracing.  Normally turned off.  Only works
** on i486 hardware.
*/
#ifdef SQLITE_PERFORMANCE_TRACE

/*
** Close a file.
*/
static int os2Close( sqlite3_file *id ){
  APIRET rc = NO_ERROR;
  os2File *pFile;
  if( id && (pFile = (os2File*)id) != 0 ){
    OSTRACE(( "CLOSE %d\n", pFile->h ));
    rc = DosClose( pFile->h );
    pFile->locktype = NO_LOCK;
    if( pFile->pathToDel != NULL ){
      rc = DosForceDelete( (PSZ)pFile->pathToDel );
      free( pFile->pathToDel );
      pFile->pathToDel = NULL;
    }

  sqlite3_int64 offset            /* Begin reading at this offset */
){
  ULONG fileLocation = 0L;
  ULONG got;
  os2File *pFile = (os2File*)id;
  assert( id!=0 );
  SimulateIOError( return SQLITE_IOERR_READ );
  OSTRACE(( "READ %d lock=%d\n", pFile->h, pFile->locktype ));
  if( DosSetFilePtr(pFile->h, offset, FILE_BEGIN, &fileLocation) != NO_ERROR ){
    return SQLITE_IOERR;
  }
  if( DosRead( pFile->h, pBuf, amt, &got ) != NO_ERROR ){
    return SQLITE_IOERR_READ;
  }
  if( got == (ULONG)amt )

  ULONG fileLocation = 0L;
  APIRET rc = NO_ERROR;
  ULONG wrote;
  os2File *pFile = (os2File*)id;
  assert( id!=0 );
  SimulateIOError( return SQLITE_IOERR_WRITE );
  SimulateDiskfullError( return SQLITE_FULL );
  OSTRACE(( "WRITE %d lock=%d\n", pFile->h, pFile->locktype ));
  if( DosSetFilePtr(pFile->h, offset, FILE_BEGIN, &fileLocation) != NO_ERROR ){
    return SQLITE_IOERR;
  }
  assert( amt>0 );
  while( amt > 0 &&
         ( rc = DosWrite( pFile->h, (PVOID)pBuf, amt, &wrote ) ) == NO_ERROR &&
         wrote > 0

/*
** Truncate an open file to a specified size
*/
static int os2Truncate( sqlite3_file *id, i64 nByte ){
  APIRET rc = NO_ERROR;
  os2File *pFile = (os2File*)id;
  OSTRACE(( "TRUNCATE %d %lld\n", pFile->h, nByte ));
  SimulateIOError( return SQLITE_IOERR_TRUNCATE );
  rc = DosSetFileSize( pFile->h, nByte );
  return rc == NO_ERROR ? SQLITE_OK : SQLITE_IOERR_TRUNCATE;
}

#ifdef SQLITE_TEST
/*
** Count the number of fullsyncs and normal syncs.  This is used to test
** that syncs and fullsyncs are occuring at the right times.
*/
int sqlite3_sync_count = 0;
int sqlite3_fullsync_count = 0;
#endif

/*
** Make sure all writes to a particular file are committed to disk.
*/
static int os2Sync( sqlite3_file *id, int flags ){
  os2File *pFile = (os2File*)id;
  OSTRACE(( "SYNC %d lock=%d\n", pFile->h, pFile->locktype ));
#ifdef SQLITE_TEST
  if( flags & SQLITE_SYNC_FULL){
    sqlite3_fullsync_count++;
  }
  sqlite3_sync_count++;
#endif
  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a

  memset(&LockArea, 0, sizeof(LockArea));
  memset(&UnlockArea, 0, sizeof(UnlockArea));
  LockArea.lOffset = SHARED_FIRST;
  LockArea.lRange = SHARED_SIZE;
  UnlockArea.lOffset = 0L;
  UnlockArea.lRange = 0L;
  res = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 1L );
  OSTRACE(( "GETREADLOCK %d res=%d\n", pFile->h, res ));
  return res;
}

/*
** Undo a readlock
*/
static int unlockReadLock( os2File *id ){
  FILELOCK  LockArea,
            UnlockArea;
  APIRET res;
  memset(&LockArea, 0, sizeof(LockArea));
  memset(&UnlockArea, 0, sizeof(UnlockArea));
  LockArea.lOffset = 0L;
  LockArea.lRange = 0L;
  UnlockArea.lOffset = SHARED_FIRST;
  UnlockArea.lRange = SHARED_SIZE;
  res = DosSetFileLocks( id->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 1L );
  OSTRACE(( "UNLOCK-READLOCK file handle=%d res=%d?\n", id->h, res ));
  return res;
}

/*
** Lock the file with the lock specified by parameter locktype - one
** of the following:
**

  int gotPendingLock = 0;/* True if we acquired a PENDING lock this time */
  FILELOCK  LockArea,
            UnlockArea;
  os2File *pFile = (os2File*)id;
  memset(&LockArea, 0, sizeof(LockArea));
  memset(&UnlockArea, 0, sizeof(UnlockArea));
  assert( pFile!=0 );
  OSTRACE(( "LOCK %d %d was %d\n", pFile->h, locktype, pFile->locktype ));

  /* If there is already a lock of this type or more restrictive on the
  ** os2File, do nothing. Don't use the end_lock: exit path, as
  ** sqlite3_mutex_enter() hasn't been called yet.
  */
  if( pFile->locktype>=locktype ){
    OSTRACE(( "LOCK %d %d ok (already held)\n", pFile->h, locktype ));
    return SQLITE_OK;
  }

  /* Make sure the locking sequence is correct
  */
  assert( pFile->locktype!=NO_LOCK || locktype==SHARED_LOCK );
  assert( locktype!=PENDING_LOCK );

    UnlockArea.lOffset = 0L;
    UnlockArea.lRange = 0L;

    /* wait longer than LOCK_TIMEOUT here not to have to try multiple times */
    res = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, 100L, 0L );
    if( res == NO_ERROR ){
      gotPendingLock = 1;
      OSTRACE(( "LOCK %d pending lock boolean set.  res=%d\n", pFile->h, res ));
    }
  }

  /* Acquire a shared lock
  */
  if( locktype==SHARED_LOCK && res == NO_ERROR ){
    assert( pFile->locktype==NO_LOCK );
    res = getReadLock(pFile);
    if( res == NO_ERROR ){
      newLocktype = SHARED_LOCK;
    }
    OSTRACE(( "LOCK %d acquire shared lock. res=%d\n", pFile->h, res ));
  }

  /* Acquire a RESERVED lock
  */
  if( locktype==RESERVED_LOCK && res == NO_ERROR ){
    assert( pFile->locktype==SHARED_LOCK );
    LockArea.lOffset = RESERVED_BYTE;
    LockArea.lRange = 1L;
    UnlockArea.lOffset = 0L;
    UnlockArea.lRange = 0L;
    res = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
    if( res == NO_ERROR ){
      newLocktype = RESERVED_LOCK;
    }
    OSTRACE(( "LOCK %d acquire reserved lock. res=%d\n", pFile->h, res ));
  }

  /* Acquire a PENDING lock
  */
  if( locktype==EXCLUSIVE_LOCK && res == NO_ERROR ){
    newLocktype = PENDING_LOCK;
    gotPendingLock = 0;
    OSTRACE(( "LOCK %d acquire pending lock. pending lock boolean unset.\n",
               pFile->h ));
  }

  /* Acquire an EXCLUSIVE lock
  */
  if( locktype==EXCLUSIVE_LOCK && res == NO_ERROR ){
    assert( pFile->locktype>=SHARED_LOCK );
    res = unlockReadLock(pFile);
    OSTRACE(( "unreadlock = %d\n", res ));
    LockArea.lOffset = SHARED_FIRST;
    LockArea.lRange = SHARED_SIZE;
    UnlockArea.lOffset = 0L;
    UnlockArea.lRange = 0L;
    res = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
    if( res == NO_ERROR ){
      newLocktype = EXCLUSIVE_LOCK;
    }else{
      OSTRACE(( "OS/2 error-code = %d\n", res ));
      getReadLock(pFile);
    }
    OSTRACE(( "LOCK %d acquire exclusive lock.  res=%d\n", pFile->h, res ));
  }

  /* If we are holding a PENDING lock that ought to be released, then
  ** release it now.
  */
  if( gotPendingLock && locktype==SHARED_LOCK ){
    int r;
    LockArea.lOffset = 0L;
    LockArea.lRange = 0L;
    UnlockArea.lOffset = PENDING_BYTE;
    UnlockArea.lRange = 1L;
    r = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
    OSTRACE(( "LOCK %d unlocking pending/is shared. r=%d\n", pFile->h, r ));
  }

  /* Update the state of the lock has held in the file descriptor then
  ** return the appropriate result code.
  */
  if( res == NO_ERROR ){
    rc = SQLITE_OK;
  }else{
    OSTRACE(( "LOCK FAILED %d trying for %d but got %d\n", pFile->h,
              locktype, newLocktype ));
    rc = SQLITE_BUSY;
  }
  pFile->locktype = newLocktype;
  OSTRACE(( "LOCK %d now %d\n", pFile->h, pFile->locktype ));
  return rc;
}

/*
** This routine checks if there is a RESERVED lock held on the specified
** file by this or any other process. If such a lock is held, return
** non-zero, otherwise zero.
*/
static int os2CheckReservedLock( sqlite3_file *id, int *pOut ){
  int r = 0;
  os2File *pFile = (os2File*)id;
  assert( pFile!=0 );
  if( pFile->locktype>=RESERVED_LOCK ){
    r = 1;
    OSTRACE(( "TEST WR-LOCK %d %d (local)\n", pFile->h, r ));
  }else{
    FILELOCK  LockArea,
              UnlockArea;
    APIRET rc = NO_ERROR;
    memset(&LockArea, 0, sizeof(LockArea));
    memset(&UnlockArea, 0, sizeof(UnlockArea));
    LockArea.lOffset = RESERVED_BYTE;
    LockArea.lRange = 1L;
    UnlockArea.lOffset = 0L;
    UnlockArea.lRange = 0L;
    rc = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
    OSTRACE(( "TEST WR-LOCK %d lock reserved byte rc=%d\n", pFile->h, rc ));
    if( rc == NO_ERROR ){
      APIRET rcu = NO_ERROR; /* return code for unlocking */
      LockArea.lOffset = 0L;
      LockArea.lRange = 0L;
      UnlockArea.lOffset = RESERVED_BYTE;
      UnlockArea.lRange = 1L;
      rcu = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
      OSTRACE(( "TEST WR-LOCK %d unlock reserved byte r=%d\n", pFile->h, rcu ));
    }
    r = !(rc == NO_ERROR);
    OSTRACE(( "TEST WR-LOCK %d %d (remote)\n", pFile->h, r ));
  }
  *pOut = r;
  return SQLITE_OK;
}

/*
** Lower the locking level on file descriptor id to locktype.  locktype

  APIRET res = NO_ERROR;
  FILELOCK  LockArea,
            UnlockArea;
  memset(&LockArea, 0, sizeof(LockArea));
  memset(&UnlockArea, 0, sizeof(UnlockArea));
  assert( pFile!=0 );
  assert( locktype<=SHARED_LOCK );
  OSTRACE(( "UNLOCK %d to %d was %d\n", pFile->h, locktype, pFile->locktype ));
  type = pFile->locktype;
  if( type>=EXCLUSIVE_LOCK ){
    LockArea.lOffset = 0L;
    LockArea.lRange = 0L;
    UnlockArea.lOffset = SHARED_FIRST;
    UnlockArea.lRange = SHARED_SIZE;
    res = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
    OSTRACE(( "UNLOCK %d exclusive lock res=%d\n", pFile->h, res ));
    if( locktype==SHARED_LOCK && getReadLock(pFile) != NO_ERROR ){
      /* This should never happen.  We should always be able to
      ** reacquire the read lock */
      OSTRACE(( "UNLOCK %d to %d getReadLock() failed\n", pFile->h, locktype ));
      rc = SQLITE_IOERR_UNLOCK;
    }
  }
  if( type>=RESERVED_LOCK ){
    LockArea.lOffset = 0L;
    LockArea.lRange = 0L;
    UnlockArea.lOffset = RESERVED_BYTE;
    UnlockArea.lRange = 1L;
    res = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
    OSTRACE(( "UNLOCK %d reserved res=%d\n", pFile->h, res ));
  }
  if( locktype==NO_LOCK && type>=SHARED_LOCK ){
    res = unlockReadLock(pFile);
    OSTRACE(( "UNLOCK %d is %d want %d res=%d\n",
              pFile->h, type, locktype, res ));
  }
  if( type>=PENDING_LOCK ){
    LockArea.lOffset = 0L;
    LockArea.lRange = 0L;
    UnlockArea.lOffset = PENDING_BYTE;
    UnlockArea.lRange = 1L;
    res = DosSetFileLocks( pFile->h, &UnlockArea, &LockArea, LOCK_TIMEOUT, 0L );
    OSTRACE(( "UNLOCK %d pending res=%d\n", pFile->h, res ));
  }
  pFile->locktype = locktype;
  OSTRACE(( "UNLOCK %d now %d\n", pFile->h, pFile->locktype ));
  return rc;
}

/*
** Control and query of the open file handle.
*/
static int os2FileControl(sqlite3_file *id, int op, void *pArg){
  switch( op ){
    case SQLITE_FCNTL_LOCKSTATE: {
      *(int*)pArg = ((os2File*)id)->locktype;
      OSTRACE(( "FCNTL_LOCKSTATE %d lock=%d\n",
                ((os2File*)id)->h, ((os2File*)id)->locktype ));
      return SQLITE_OK;
    }
  }
  return SQLITE_ERROR;
}

/*

  }
  j = sqlite3Strlen30( zBuf );
  sqlite3_randomness( 20, &zBuf[j] );
  for( i = 0; i < 20; i++, j++ ){
    zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ];
  }
  zBuf[j] = 0;
  OSTRACE(( "TEMP FILENAME: %s\n", zBuf ));
  return SQLITE_OK;
}


/*
** Turn a relative pathname into a full pathname.  Write the full
** pathname into zFull[].  zFull[] will be at least pVfs->mxPathname

    }
    zName = zTmpname;
  }


  memset( pFile, 0, sizeof(*pFile) );

  OSTRACE(( "OPEN want %d\n", flags ));

  if( flags & SQLITE_OPEN_READWRITE ){
    ulOpenMode |= OPEN_ACCESS_READWRITE;
    OSTRACE(( "OPEN read/write\n" ));
  }else{
    ulOpenMode |= OPEN_ACCESS_READONLY;
    OSTRACE(( "OPEN read only\n" ));
  }

  if( flags & SQLITE_OPEN_CREATE ){
    ulOpenFlags |= OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
    OSTRACE(( "OPEN open new/create\n" ));
  }else{
    ulOpenFlags |= OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_FAIL_IF_NEW;
    OSTRACE(( "OPEN open existing\n" ));
  }

  if( flags & SQLITE_OPEN_MAIN_DB ){
    ulOpenMode |= OPEN_SHARE_DENYNONE;
    OSTRACE(( "OPEN share read/write\n" ));
  }else{
    ulOpenMode |= OPEN_SHARE_DENYWRITE;
    OSTRACE(( "OPEN share read only\n" ));
  }

  if( flags & SQLITE_OPEN_DELETEONCLOSE ){
    char pathUtf8[CCHMAXPATH];
#ifdef NDEBUG /* when debugging we want to make sure it is deleted */
    ulFileAttribute = FILE_HIDDEN;
#endif
    os2FullPathname( pVfs, zName, CCHMAXPATH, pathUtf8 );
    pFile->pathToDel = convertUtf8PathToCp( pathUtf8 );
    OSTRACE(( "OPEN hidden/delete on close file attributes\n" ));
  }else{
    pFile->pathToDel = NULL;
    OSTRACE(( "OPEN normal file attribute\n" ));
  }

  /* always open in random access mode for possibly better speed */
  ulOpenMode |= OPEN_FLAGS_RANDOM;
  ulOpenMode |= OPEN_FLAGS_FAIL_ON_ERROR;
  ulOpenMode |= OPEN_FLAGS_NOINHERIT;

  zNameCp = convertUtf8PathToCp( zName );
  rc = DosOpen( (PSZ)zNameCp,
                &h,
                &ulAction,
                0L,
                ulFileAttribute,
                ulOpenFlags,
                ulOpenMode,
                (PEAOP2)NULL );
  free( zNameCp );
  if( rc != NO_ERROR ){
    OSTRACE(( "OPEN Invalid handle rc=%d: zName=%s, ulAction=%#lx, ulAttr=%#lx, ulFlags=%#lx, ulMode=%#lx\n",
              rc, zName, ulAction, ulFileAttribute, ulOpenFlags, ulOpenMode ));
    if( pFile->pathToDel )
      free( pFile->pathToDel );
    pFile->pathToDel = NULL;
    if( flags & SQLITE_OPEN_READWRITE ){
      OSTRACE(( "OPEN %d Invalid handle\n",
                ((flags | SQLITE_OPEN_READONLY) & ~SQLITE_OPEN_READWRITE) ));
      return os2Open( pVfs, zName, id,
                      ((flags | SQLITE_OPEN_READONLY) & ~SQLITE_OPEN_READWRITE),
                      pOutFlags );
    }else{
      return SQLITE_CANTOPEN;
    }
  }

  if( pOutFlags ){
    *pOutFlags = flags & SQLITE_OPEN_READWRITE ? SQLITE_OPEN_READWRITE : SQLITE_OPEN_READONLY;
  }

  pFile->pMethod = &os2IoMethod;
  pFile->h = h;
  OpenCounter(+1);
  OSTRACE(( "OPEN %d pOutFlags=%d\n", pFile->h, pOutFlags ));
  return SQLITE_OK;
}

/*
** Delete the named file.
*/
static int os2Delete(
  sqlite3_vfs *pVfs,                     /* Not used on os2 */
  const char *zFilename,                 /* Name of file to delete */
  int syncDir                            /* Not used on os2 */
){
  APIRET rc = NO_ERROR;
  char *zFilenameCp = convertUtf8PathToCp( zFilename );
  SimulateIOError( return SQLITE_IOERR_DELETE );
  rc = DosDelete( (PSZ)zFilenameCp );
  free( zFilenameCp );
  OSTRACE(( "DELETE \"%s\"\n", zFilename ));
  return rc == NO_ERROR ? SQLITE_OK : SQLITE_IOERR_DELETE;
}

/*
** Check the existance and status of a file.
*/
static int os2Access(
  sqlite3_vfs *pVfs,        /* Not used on os2 */
  const char *zFilename,    /* Name of file to check */
  int flags,                /* Type of test to make on this file */
  int *pOut                 /* Write results here */
){
  FILESTATUS3 fsts3ConfigInfo;
  APIRET rc = NO_ERROR;
  char *zFilenameCp = convertUtf8PathToCp( zFilename );

  memset( &fsts3ConfigInfo, 0, sizeof(fsts3ConfigInfo) );
  rc = DosQueryPathInfo( (PSZ)zFilenameCp, FIL_STANDARD,
                         &fsts3ConfigInfo, sizeof(FILESTATUS3) );
  free( zFilenameCp );
  OSTRACE(( "ACCESS fsts3ConfigInfo.attrFile=%d flags=%d rc=%d\n",
            fsts3ConfigInfo.attrFile, flags, rc ));
  switch( flags ){
    case SQLITE_ACCESS_READ:
    case SQLITE_ACCESS_EXISTS:
      rc = (rc == NO_ERROR);
      OSTRACE(( "ACCESS %s access of read and exists  rc=%d\n", zFilename, rc));
      break;
    case SQLITE_ACCESS_READWRITE:
      rc = (rc == NO_ERROR) && ( (fsts3ConfigInfo.attrFile & FILE_READONLY) == 0 );
      OSTRACE(( "ACCESS %s access of read/write  rc=%d\n", zFilename, rc ));
      break;
    default:
      assert( !"Invalid flags argument" );
  }
  *pOut = rc;
  return SQLITE_OK;
}

    os2DlOpen,         /* xDlOpen */
    os2DlError,        /* xDlError */
    os2DlSym,          /* xDlSym */
    os2DlClose,        /* xDlClose */
    os2Randomness,     /* xRandomness */
    os2Sleep,          /* xSleep */
    os2CurrentTime,    /* xCurrentTime */
    os2GetLastError,   /* xGetLastError */
  };
  sqlite3_vfs_register(&os2Vfs, 1);
  initUconvObjects();
  return SQLITE_OK;
}
int sqlite3_os_end(void){
  freeUconvObjects();
  return SQLITE_OK;
}

#endif /* SQLITE_OS_OS2 */

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <sys/time.h>
#include <errno.h>
#include <sys/mman.h>

#if SQLITE_ENABLE_LOCKING_STYLE
# include <sys/ioctl.h>
# if OS_VXWORKS
#  include <semaphore.h>
#  include <limits.h>
# else

/*
** Only set the lastErrno if the error code is a real error and not 
** a normal expected return code of SQLITE_BUSY or SQLITE_OK
*/
#define IS_LOCK_ERROR(x)  ((x != SQLITE_OK) && (x != SQLITE_BUSY))

/* Forward references */
typedef struct unixShm unixShm;               /* Connection shared memory */
typedef struct unixShmNode unixShmNode;       /* Shared memory instance */
typedef struct unixInodeInfo unixInodeInfo;   /* An i-node */
typedef struct UnixUnusedFd UnixUnusedFd;     /* An unused file descriptor */

/*
** Sometimes, after a file handle is closed by SQLite, the file descriptor
** cannot be closed immediately. In these cases, instances of the following
** structure are used to store the file descriptor while waiting for an
** opportunity to either close or reuse it.
*/

struct UnixUnusedFd {
  int fd;                   /* File descriptor to close */
  int flags;                /* Flags this file descriptor was opened with */
  UnixUnusedFd *pNext;      /* Next unused file descriptor on same file */
};

/*
** The unixFile structure is subclass of sqlite3_file specific to the unix
** VFS implementations.
*/
typedef struct unixFile unixFile;
struct unixFile {
  sqlite3_io_methods const *pMethod;  /* Always the first entry */

  unixInodeInfo *pInode;              /* Info about locks on this inode */
  int h;                              /* The file descriptor */
  int dirfd;                          /* File descriptor for the directory */
  unsigned char eFileLock;            /* The type of lock held on this fd */
  int lastErrno;                      /* The unix errno from last I/O error */
  void *lockingContext;               /* Locking style specific state */
  UnixUnusedFd *pUnused;              /* Pre-allocated UnixUnusedFd */
  int fileFlags;                      /* Miscellanous flags */
  const char *zPath;                  /* Name of the file */
  unixShm *pShm;                      /* Shared memory segment information */
#if SQLITE_ENABLE_LOCKING_STYLE
  int openFlags;                      /* The flags specified at open() */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
  unsigned fsFlags;                   /* cached details from statfs() */
#endif



#if OS_VXWORKS
  int isDelete;                       /* Delete on close if true */
  struct vxworksFileId *pId;          /* Unique file ID */
#endif
#ifndef NDEBUG
  /* The next group of variables are used to track whether or not the
  ** transaction counter in bytes 24-27 of database files are updated
  ** whenever any part of the database changes.  An assertion fault will
  ** occur if a file is updated without also updating the transaction
  ** counter.  This test is made to avoid new problems similar to the

#else
#define threadid 0
#endif


/*
** Helper functions to obtain and relinquish the global mutex. The
** global mutex is used to protect the unixInodeInfo and
** vxworksFileId objects used by this file, all of which may be 
** shared by multiple threads.
**
** Function unixMutexHeld() is used to assert() that the global mutex 
** is held when required. This function is only used as part of assert() 
** statements. e.g.
**

#ifdef SQLITE_DEBUG
/*
** Helper function for printing out trace information from debugging
** binaries. This returns the string represetation of the supplied
** integer lock-type.
*/
static const char *azFileLock(int eFileLock){
  switch( eFileLock ){
    case NO_LOCK: return "NONE";
    case SHARED_LOCK: return "SHARED";
    case RESERVED_LOCK: return "RESERVED";
    case PENDING_LOCK: return "PENDING";
    case EXCLUSIVE_LOCK: return "EXCLUSIVE";
  }
  return "ERROR";

** POSIX lock if the internal lock structure transitions between
** a locked and an unlocked state.
**
** But wait:  there are yet more problems with POSIX advisory locks.
**
** If you close a file descriptor that points to a file that has locks,
** all locks on that file that are owned by the current process are
** released.  To work around this problem, each unixInodeInfo object
** maintains a count of the number of pending locks on tha inode.

** When an attempt is made to close an unixFile, if there are
** other unixFile open on the same inode that are holding locks, the call
** to close() the file descriptor is deferred until all of the locks clear.
** The unixInodeInfo structure keeps a list of file descriptors that need to
** be closed and that list is walked (and cleared) when the last lock
** clears.
**
** Yet another problem:  LinuxThreads do not play well with posix locks.
**
** Many older versions of linux use the LinuxThreads library which is
** not posix compliant.  Under LinuxThreads, a lock created by thread
** A cannot be modified or overridden by a different thread B.
** Only thread A can modify the lock.  Locking behavior is correct
** if the appliation uses the newer Native Posix Thread Library (NPTL)
** on linux - with NPTL a lock created by thread A can override locks
** in thread B.  But there is no way to know at compile-time which
** threading library is being used.  So there is no way to know at
** compile-time whether or not thread A can override locks on thread B.
** One has to do a run-time check to discover the behavior of the
** current process.
**






** SQLite used to support LinuxThreads.  But support for LinuxThreads

** was dropped beginning with version 3.7.0.  SQLite will still work with




** LinuxThreads provided that (1) there is no more than one connection 
** per database file in the same process and (2) database connections

** do not move across threads.






*/









/*
** An instance of the following structure serves as the key used
** to locate a particular unixInodeInfo object.

*/
struct unixFileId {
  dev_t dev;                  /* Device number */
#if OS_VXWORKS
  struct vxworksFileId *pId;  /* Unique file ID for vxworks. */
#else
  ino_t ino;                  /* Inode number */
#endif
};


















/*
** An instance of the following structure is allocated for each open
** inode.  Or, on LinuxThreads, there is one of these structures for
** each inode opened by each thread.
**
** A single inode can have multiple file descriptors, so each unixFile
** structure contains a pointer to an instance of this object and this
** object keeps a count of the number of unixFile pointing to it.
*/
struct unixInodeInfo {
  struct unixFileId fileId;       /* The lookup key */
  int nShared;                    /* Number of SHARED locks held */
  int eFileLock;                  /* One of SHARED_LOCK, RESERVED_LOCK etc. */
  int nRef;                       /* Number of pointers to this structure */
  unixShmNode *pShmNode;          /* Shared memory associated with this inode */
  int nLock;                      /* Number of outstanding file locks */
  UnixUnusedFd *pUnused;          /* Unused file descriptors to close */
  unixInodeInfo *pNext;           /* List of all unixInodeInfo objects */
  unixInodeInfo *pPrev;           /*    .... doubly linked */
#if defined(SQLITE_ENABLE_LOCKING_STYLE)
  unsigned long long sharedByte;  /* for AFP simulated shared lock */
#endif





















#if OS_VXWORKS
  sem_t *pSem;                    /* Named POSIX semaphore */
  char aSemName[MAX_PATHNAME+2];  /* Name of that semaphore */
#endif

};






/*
** A lists of all unixInodeInfo objects.
*/
static unixInodeInfo *inodeList = 0;


/*

** Close all file descriptors accumuated in the unixInodeInfo->pUnused list.
** If all such file descriptors are closed without error, the list is


** cleared and SQLITE_OK returned.
**

** Otherwise, if an error occurs, then successfully closed file descriptor
** entries are removed from the list, and SQLITE_IOERR_CLOSE returned. 


** not deleted and SQLITE_IOERR_CLOSE returned.




*/ 



static int closePendingFds(unixFile *pFile){
  int rc = SQLITE_OK;

  unixInodeInfo *pInode = pFile->pInode;
  UnixUnusedFd *pError = 0;
  UnixUnusedFd *p;



  UnixUnusedFd *pNext;






  for(p=pInode->pUnused; p; p=pNext){
    pNext = p->pNext;
    if( close(p->fd) ){

      pFile->lastErrno = errno;
      rc = SQLITE_IOERR_CLOSE;











      p->pNext = pError;
      pError = p;
    }else{

      sqlite3_free(p);
    }
  }








  pInode->pUnused = pError;
  return rc;



}






















/*
** Release a unixInodeInfo structure previously allocated by findInodeInfo().
**
** The mutex entered using the unixEnterMutex() function must be held
** when this function is called.
*/
static void releaseInodeInfo(unixFile *pFile){
  unixInodeInfo *pInode = pFile->pInode;
  assert( unixMutexHeld() );
  if( pInode ){
    pInode->nRef--;
    if( pInode->nRef==0 ){
      assert( pInode->pShmNode==0 );
      closePendingFds(pFile);
      if( pInode->pPrev ){
        assert( pInode->pPrev->pNext==pInode );
        pInode->pPrev->pNext = pInode->pNext;
      }else{
        assert( inodeList==pInode );
        inodeList = pInode->pNext;
      }
      if( pInode->pNext ){
        assert( pInode->pNext->pPrev==pInode );
        pInode->pNext->pPrev = pInode->pPrev;
      }
      sqlite3_free(pInode);
    }
  }
}

/*






































** Given a file descriptor, locate the unixInodeInfo object that
** describes that file descriptor.  Create a new one if necessary.  The
** return value might be uninitialized if an error occurs.
**
** The mutex entered using the unixEnterMutex() function must be held
** when this function is called.
**
** Return an appropriate error code.
*/
static int findInodeInfo(
  unixFile *pFile,               /* Unix file with file desc used in the key */
  unixInodeInfo **ppInode        /* Return the unixInodeInfo object here */

){
  int rc;                        /* System call return code */
  int fd;                        /* The file descriptor for pFile */

  struct unixFileId fileId;      /* Lookup key for the unixInodeInfo */
  struct stat statbuf;           /* Low-level file information */

  unixInodeInfo *pInode = 0;     /* Candidate unixInodeInfo object */

  assert( unixMutexHeld() );

  /* Get low-level information about the file that we can used to
  ** create a unique name for the file.
  */
  fd = pFile->h;